[RFC v4 00/18] ath10k high latency

[Steve deRosier]

Hi Erik,

On Sun, Dec 31, 2017 at 9:29 AM, Erik Stromdahl
<erik.stromdahl at gmail.com> wrote:
> Uplink test results (WUSB6100M -> other computer):
>
> # iperf-client.sh 192.168.1.244
> /usr/bin/iperf
> ------------------------------------------------------------
> Client connecting to 192.168.1.244, TCP port 1234
> TCP window size: 85.0 KByte (default)
> ------------------------------------------------------------
> [  3] local 192.168.1.190 port 50524 connected with 192.168.1.244 port
> 1234
> [ ID] Interval       Transfer     Bandwidth
> [  3]  0.0-10.1 sec  10.8 MBytes  8.95 Mbits/sec
>
> The result is not so good (I expect more from an 11ac device),
> but hopefully it is configuration related.
>

Indeed. As a point of reference, an AR6004 device I have on my desk
(which is a/b/g/n, no ac), built into a custom SBC, I can normally get
iperf runs of >35 Mbits/sec.  So, in short, that run is showing
there's an issue. I don't have your device so I can't really help out
much more than that, but in the next week or so I'll try to look at
the patches and see if something pops to my eye.

- Steve