"htt version request timed out" with the last 4.1.1.c1 firmware

Ryan Hsu ryanhsu at qti.qualcomm.com
Thu Dec 14 13:21:13 PST 2017


On 12/14/2017 05:14 AM, Kalle Valo wrote:

> Paul Nuville <paulnuville at yahoo.fr> writes:
>
>> I've installed Archlinux on a Samsung Galaxy Book 10.6", and I'm trying to set 
>> up the wifi. The only firmware that seems to be suitable is the lastest 4.1.1.c1 
>> one. But I've some errors and neither ip ad networkmanager are able to set up 
>> the wlan interface. 
>> Here are some outputs : 
>>
> [...]
>
>> [ 1777.861815] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 
>> chip_id 0x00340aff sub 144d:c150
>> [ 1777.861817] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 
>> 0 testmode 0
>> [ 1777.862589] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.2.0-00180-
>> QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5
>> [ 1777.926402] ath10k_pci 0000:01:00.0: failed to fetch board data for 
>> bus=pci,vendor=168c,device=003e,subsystem-vendor=144d,subsystem-device=c150 
>> from ath10k/QCA6174/hw3.0/board-2.bin
>> [ 1777.926428] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 
>> ed5f849a
>> [ 1781.596516] ath10k_pci 0000:01:00.0: htt version request timed out
> ath10k didn't file the correct board file from board-2.bin. Try updating
> to the latest board-2.bin:
>
> https://github.com/kvalo/ath10k-firmware/blob/master/QCA6174/hw3.0/board-2.bin
>
> The md5sum should be:
>
> eddaa17fa2092bcd6713720116e421f1

Other than updating the board-2.bin file, you might also want to make sure you update the firmware file.
I saw you're still using the Rm2.0 instead of the 4.4.1.c1 you asked.


-- 

Ryan Hsu



More information about the ath10k mailing list