"htt version request timed out" with the last 4.1.1.c1 firmware

[Kalle Valo]

Paul Nuville <paulnuville at yahoo.fr> writes:

> I've installed Archlinux on a Samsung Galaxy Book 10.6", and I'm trying to set 
> up the wifi. The only firmware that seems to be suitable is the lastest 4.1.1.c1 
> one. But I've some errors and neither ip ad networkmanager are able to set up 
> the wlan interface. 
> Here are some outputs : 
>

[...]

> [ 1777.861815] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 
> chip_id 0x00340aff sub 144d:c150
> [ 1777.861817] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 
> 0 testmode 0
> [ 1777.862589] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.2.0-00180-
> QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5
> [ 1777.926402] ath10k_pci 0000:01:00.0: failed to fetch board data for 
> bus=pci,vendor=168c,device=003e,subsystem-vendor=144d,subsystem-device=c150 
> from ath10k/QCA6174/hw3.0/board-2.bin
> [ 1777.926428] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 
> ed5f849a
> [ 1781.596516] ath10k_pci 0000:01:00.0: htt version request timed out

ath10k didn't file the correct board file from board-2.bin. Try updating
to the latest board-2.bin:

https://github.com/kvalo/ath10k-firmware/blob/master/QCA6174/hw3.0/board-2.bin

The md5sum should be:

eddaa17fa2092bcd6713720116e421f1

-- 
Kalle Valo