[PATCH 2/2] ath10k: add per peer tx stats support for 10.2.4

[Maxime Bizon]

On Thu, 2017-11-30 at 18:28 +0530, akolli at qti.qualcomm.com wrote:

Hello,

> Tested on QCA9880 with firmware version 10.2.4.70.48. This should also
> work with firmware branch 10.2.4-1.0-00029

I tried using your patch on 4.14 with firmware 10.2.4-1.0-00029

> Parse peer stats from pktlog packets and update the tx rate information
> per STA. This way user space can query about transmit rate with iw:

everything works ok, ath10k_update_per_peer_tx_stats() is called and
ath10k_sta fields are updated correctly

but tx bitrate is still 6 MBit/s in station dump

 # iw dev wlan1 station dump
Station e4:42:a6:24:c8:95 (on wlan1)
	inactive time:	0 ms
	rx bytes:	222415
	rx packets:	1678
	tx bytes:	8511140
	tx packets:	5828
	tx retries:	0
	tx failed:	4
	rx drop misc:	2
	signal:  	-39 [-54, -56, -39] dBm
	signal avg:	-39 [-53, -55, -39] dBm
	tx bitrate:	6.0 MBit/s
	rx bitrate:	360.0 MBit/s VHT-MCS 8 40MHz short GI VHT-NSS 2
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		no
	TDLS peer:	no
	DTIM period:	2
	beacon interval:96
	short slot time:yes
	connected time:	1136 seconds

I see that ath10k does not implement ->dump_station callback, so which
part of the code updates the generic "struct station_info" fields ?

Am I missing a patch ?

Thanks

-- 
Maxime