[PATCH 0/2] ath10k: Add support for QCA9887

[Mohammed Shafi Shajakhan]

Hi Sven,

On Tue, Jun 07, 2016 at 06:54:54PM +0200, Sven Eckelmann wrote:
> On Tuesday 07 June 2016 20:20:02 Mohammed Shafi Shajakhan wrote:
> [...]
> > [shafi] it would be helpful if you can share your basic test results (if its
> > possible to share). Have you tried to bring up the card in 5ghz (or) 2ghz.
> > Or both of them were tried ?
> 
> * 5GHz-only (I have no 2.4GHz capable card)
> * card is able to scan
> * card is able to create an AP
> * data can be transferred via AP and client (bidirectional connection)
> * performance was more like 15 Mibit/s for 1x1 HT20 11n devices instead of
>   something like 35-40 Mibit/s

[shafi] sure thanks a lot, this is a good start, i will keep you posted
with my findings and results.

> 
> I cannot give you any more detailed, current performance test results because
> they were done months ago and are most likely not relevant to describe the
> current state. Please ask Kalle if you want to know why the old tests were
> done many, many months ago.

[shafi] sure, hopefully we can get this sorted out. Thank you for the patches
and support.

> 
> Please ask Marek when you want to have tests done with the current
> mac8011+ath10k.

[shafi] thanks

> 
> Kind regards,
> 	Sven