rx rate issue

[Ben Greear]

On 07/20/2016 04:12 AM, Sebastian Gottschall wrote:
> Am 20.07.2016 um 13:03 schrieb Michal Kazior:

>>>>> WDS AP:
>>>>>                Peer MAC address 40:a5:ef:85:4d:6f
>>>>>                        Peer RSSI 12
>>>>>                     Peer TX rate 175500
>>>>>                     Peer RX rate 175500
>>>>>                 Peer RX duration 0
>>>>>
>>>>>
>>>>> WDS STA:
>>>>>               Peer MAC address 40:a5:ef:51:49:db
>>>>>                        Peer RSSI 13
>>>>>                     Peer TX rate 175500
>>>>>                     Peer RX rate 351000
>>>>>                 Peer RX duration 0
>> [...]

One thing, if your signal is really this hot (-12, -13), then you are likely over-saturating
the RF logic.  You normally get best results at around -40 signal level...

Thanks,
Ben

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com