Issues with Compex WLE900VX in 80211AC mode

[B R Manjula]

Hi,
   We are trying to bring up freescale T1024RDB with WLE900VX 7AA, in 80211ac 5GHz AP
and STA mode.

->We are running Linux 3.12 Kernel, with backports-4.2.6-1 for ath10k support.

->We downloaded firmware from the following link for QCA988x hw ver 2.0:
https://wireless.wiki.kernel.org/en/users/drivers/ath10k/firmware

->Then we are facing the below issue.

whenever we run hostapd for 80211ac mode(channel 36, 40,44), it is giving below error.

-------------------------------------------------------------------
#ath10k_pci 0000:01:00.0: no channel configured; ignoring frame(s)!
-------------------------------------------------------------------

The corresponding minicom log also attached with mail.

The phy info is as show below.
-----------------------------------------------------------------------------------
Saying no support for 5GHz frequency

Frequencies:
                       * 5180 MHz [36] (30.0 dBm) (passive scanning, no IBSS)
                       * 5200 MHz [40] (30.0 dBm) (passive scanning, no IBSS)
                       * 5220 MHz [44] (30.0 dBm) (passive scanning, no IBSS)
                       * 5240 MHz [48] (30.0 dBm) (passive scanning, no IBSS)
                       * 5260 MHz [52] (30.0 dBm) (passive scanning, no IBSS, radar
detection)
                         DFS state: usable (for 3735 sec)
                       * 5280 MHz [56] (30.0 dBm) (passive scanning, no IBSS, radar
detection)
                         DFS state: usable (for 3735 sec)
                       * 5300 MHz [60] (30.0 dBm) (passive scanning, no IBSS, radar
detection)
                         DFS state: usable (for 3735 sec)
                       * 5320 MHz [64] (30.0 dBm) (passive scanning, no IBSS, radar
detection)
                         DFS state: usable (for 3735 sec)
                       * 5500 MHz [100] (disabled)
                       * 5520 MHz [104] (disabled)
                       * 5540 MHz [108] (disabled)
                       * 5560 MHz [112] (disabled)
                       * 5580 MHz [116] (disabled)
                       * 5600 MHz [120] (disabled)
                       * 5620 MHz [124] (disabled)
                       * 5640 MHz [128] (disabled)
                       * 5660 MHz [132] (disabled)
                       * 5680 MHz [136] (disabled)
                       * 5700 MHz [140] (disabled)
                       * 5720 MHz [144] (disabled)
                       * 5745 MHz [149] (30.0 dBm) (passive scanning, no IBSS)
                       * 5765 MHz [153] (30.0 dBm) (passive scanning, no IBSS)
                       * 5785 MHz [157] (30.0 dBm) (passive scanning, no IBSS)
                       * 5805 MHz [161] (30.0 dBm) (passive scanning, no IBSS)
                       * 5825 MHz [165] (30.0 dBm) (passive scanning, no IBSS)

------------------------------------------------------------------------------------

Please let us know, is this the firmware/hardware limitation or configuration to work in 
5GHz channels in 80211ac mode.


regards,
Manjula

----------
This email and any files transmitted with it are confidential and intended solely for 
the use of the individual or entity to whom they are addressed.  If you are not the 
intended recipient you are notified that disclosing, copying, distributing or taking 
any action in reliance on the contents of this information is strictly prohibited. The 
sender does not accept liability for any errors or omissions in the contents of this 
message, which arise as a result of e-mail t

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: MINICOM-LOG.txt
URL: <http://lists.infradead.org/pipermail/ath10k/attachments/20160128/d8e35132/attachment.txt>