Mesh on ath10k drops all packets
Jeroen Roovers
jeroen.roovers at airfi.aero
Fri Jan 22 02:55:10 PST 2016
wpa_supplicant config looks like this:
user_mpm=1
update_config=1
network={
mode=5
ssid="_"
frequency=2412
proto=RSN
key_mgmt=SAE
pairwise=CCMP
group=CCMP
psk="..."
}
On 22 January 2016 at 11:38, Jeroen Roovers <jeroen.roovers at airfi.aero> wrote:
> Jan 22 11:34:21 wim kernel: wlan0: TBTT : max clockdrift=0; too small to adjust
> Jan 22 11:34:22 wim kernel: wlan0: STA 40:e2:30:cb:9a:11 : offset was
> invalid, t_offset=1712128384
> Jan 22 11:34:22 wim kernel: wlan0: TBTT : max clockdrift=0; too small to adjust
> Jan 22 11:34:23 wim kernel: wlan0: STA 40:e2:30:cb:9a:11 : is adjusting TBTT
> Jan 22 11:34:23 wim kernel: wlan0: TBTT : max clockdrift=0; too small to adjust
> Jan 22 11:34:24 wim kernel: wlan0: STA 40:e2:30:cb:9a:11 : offset was
> invalid, t_offset=1714176384
> Jan 22 11:34:24 wim kernel: wlan0: TBTT : max clockdrift=0; too small to adjust
> Jan 22 11:34:25 wim kernel: wlan0: STA 40:e2:30:cb:9a:11 :
> t_offset=1715200384, t_offset_setpoint=1714176364,
> t_clockdrift=-1024020
> Jan 22 11:34:25 wim kernel: wlan0: STA 40:e2:30:cb:9a:11 :
> t_clockdrift=-1024020 too large, setpoint reset
> Jan 22 11:34:25 wim kernel: wlan0: TBTT : max clockdrift=0; too small to adjust
> Jan 22 11:34:26 wim kernel: wlan0: STA 40:e2:30:cb:9a:11 : is adjusting TBTT
> Jan 22 11:34:26 wim kernel: wlan0: TBTT : max clockdrift=0; too small to adjust
> Jan 22 11:34:27 wim kernel: wlan0: STA 40:e2:30:cb:9a:11 : offset was
> invalid, t_offset=1717248384
> Jan 22 11:34:27 wim kernel: wlan0: TBTT : max clockdrift=0; too small to adjust
> Jan 22 11:34:28 wim kernel: wlan0: STA 40:e2:30:cb:9a:11 :
> t_offset=1718272384, t_offset_setpoint=1717248364,
> t_clockdrift=-1024020
> Jan 22 11:34:28 wim kernel: wlan0: STA 40:e2:30:cb:9a:11 :
> t_clockdrift=-1024020 too large, setpoint reset
> Jan 22 11:34:28 wim kernel: wlan0: TBTT : max clockdrift=0; too small to adjust
> Jan 22 11:34:29 wim kernel: wlan0: STA 40:e2:30:cb:9a:11 : offset was
> invalid, t_offset=1719296384
>
> I seem to be able to get an RSN mesh going using wpa_supplicant, but
> the ath10k sees only its own packets in tcpdump while the ath9k on the
> other side sees everything.
>
> Kernel is 4.4.0. Firmware is 10.2.4.70.17-2.
More information about the ath10k
mailing list