ath10k drivers on t1024 freescale board

B R Manjula brm at cdot.in
Tue Jan 12 00:17:04 PST 2016


Thanks for your input which version of the backport to be taken for kernel 3.12

backports-4.2.6-1	signed			
backports-4.1.1-1	signed			
backports-4.0.1-1	signed			
backports-3.19-rc1-1	signed			
backports-3.18.1-1	signed			
backports-3.17.1-1	signed			
backports-3.16.2-1	signed			
backports-3.15.9-1	signed			
backports-3.14-1	signed			
backports-3.12.8-1	signed			
backports-3.10.19-1	signed			

where do we get otp.bin file

On Tue, 12 Jan 2016 09:04:57 +0100, Michal Kazior wrote
> On 12 January 2016 at 08:05, B R Manjula <brm at cdot.in> wrote:
> > Hello ,
> >
> > We are using kernel 3.11 on FREESCALE reference board T1024RDB-64bit board trying to
> > bringup ath10k drivers we are using WLE-900VX-7AA (11ac pcie mini card) we 
downloaded
> > the
> > firmware from the following site:
> > https://github.com/kvalo/ath10k-firmware/blob/master/QCA988X/main/firmware-
> > 2.bin_999.999.0.636
> > replaced as firmware.bin in the directory /lib/firmware/ath10k/QCA988X/hw2.0
> >
> > board.bin is downloaded from
> > https://github.com/kvalo/ath10k-firmware/blob/master/QCA988X/board.bin
> >
> > and otp.bin was not found we just placed some file in the name as otp.bin
> >
> > we are getting the following issue:
> >
> > ath10k_pci 0000:01:00.0: BAR 0: assigned [mem 0xc00000000-0xc001fffff 64bit]
> > ath10k: MSI-X didn't succeed (1), trying MSI
> > ath10k: MSI interrupt handling
> > ath10k: Hardware name qca988x hw2.0 version 0x4100016c
> > ath10k: early firmware event indicated
> > ath10k: unable to write to the device
> > ath10k: could not write otp (-110)
> > ath10k: could not init core (-110)
> > ath10k: could not probe fw (-110)
> > ath10k: could not register driver core (-110)
> > ath10k_pci: probe of 0000:01:00.0 failed with error -110
> >
> > what could be the reason.
> 
> You can't just go about and use FW API2 firmware as FW API1 one. No
> wonder device crashed.
> 
> Also you can't just place any file instead of otp.bin.
> 
> Moreover you're using an arcane version of ath10k. It's wasteful if
> you're going to report problems that were already fixed. Please
> upgrade the kernel or use backports:
> 
>   https://wireless.wiki.kernel.org/en/users/drivers/ath10k/backports
> 
> Michał
> 
> _______________________________________________
> ath10k mailing list
> ath10k at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k


Disclaimer:
----------
This email and any files transmitted with it are confidential and intended solely for 
the use of the individual or entity to whom they are addressed.  If you are not the 
intended recipient you are notified that disclosing, copying, distributing or taking 
any action in reliance on the contents of this information is strictly prohibited. The 
sender does not accept liability for any errors or omissions in the contents of this 
message, which arise as a result of e-mail t




More information about the ath10k mailing list