Qualcomm Atheros Device 0042 (rev 30)
vagner
vagnerrener at gmail.com
Thu Jan 7 02:20:33 PST 2016
I have tried this before and did not work :(
My dmesg is here:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.3.0-1-amd64
(debian-kernel at lists.debian.org) (gcc version 5.3.1 20160101 (Debian
5.3.1-5) ) #1 SMP Debian 4.3.3-5 (2016-01-04)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-1-amd64
root=UUID=9b688b36-f8c5-411b-abf3-f5cf5f78ca7e ro quiet
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: xstate_offset[3]: 03c0, xstate_sizes[3]: 0040
[ 0.000000] x86/fpu: xstate_offset[4]: 0400, xstate_sizes[4]: 0040
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating
point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is
0x440 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000073c9dfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000073c9e000-0x0000000073c9efff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000073c9f000-0x0000000073cc8fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000073cc9000-0x0000000073d78fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000073d79000-0x0000000074678fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000074679000-0x000000008558dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008558e000-0x0000000085f7dfff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000085f7e000-0x0000000087f7dfff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000087f7e000-0x0000000087ffdfff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000087ffe000-0x0000000087ffefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000087fff000-0x00000000880fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000089000000-0x000000008c7fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa10000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002727fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: LENOVO 80Q7/Paris 5A8, BIOS D5CN28WW 08/13/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x272800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0087FFF000 mask 7FFFFFF000 uncachable
[ 0.000000] 2 base 0088000000 mask 7FF8000000 uncachable
[ 0.000000] 3 base 0090000000 mask 7FF0000000 uncachable
[ 0.000000] 4 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 5 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0x87fff000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x87fff max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped
at [ffff8800000fe1b0]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01d24000, 0x01d24fff] PGTABLE
[ 0.000000] BRK [0x01d25000, 0x01d25fff] PGTABLE
[ 0.000000] BRK [0x01d26000, 0x01d26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x272600000-0x2727fffff]
[ 0.000000] [mem 0x272600000-0x2727fffff] page 2M
[ 0.000000] BRK [0x01d27000, 0x01d27fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x260000000-0x2725fffff]
[ 0.000000] [mem 0x260000000-0x2725fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x240000000-0x25fffffff]
[ 0.000000] [mem 0x240000000-0x25fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x73c9dfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x73bfffff] page 2M
[ 0.000000] [mem 0x73c00000-0x73c9dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x73cc9000-0x73d78fff]
[ 0.000000] [mem 0x73cc9000-0x73d78fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x74679000-0x8558dfff]
[ 0.000000] [mem 0x74679000-0x747fffff] page 4k
[ 0.000000] [mem 0x74800000-0x853fffff] page 2M
[ 0.000000] [mem 0x85400000-0x8558dfff] page 4k
[ 0.000000] BRK [0x01d28000, 0x01d28fff] PGTABLE
[ 0.000000] BRK [0x01d29000, 0x01d29fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x87ffe000-0x87ffefff]
[ 0.000000] [mem 0x87ffe000-0x87ffefff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x23fffffff]
[ 0.000000] [mem 0x100000000-0x23fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x376a2000-0x37b48fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x0000000087FCB188 0000EC (v01 LENOVO CB-01
00000001 01000013)
[ 0.000000] ACPI: FACP 0x0000000087FEB000 00010C (v05 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x0000000087FD0000 016943 (v02 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x0000000087F4E000 000040
[ 0.000000] ACPI: SSDT 0x0000000087FC9000 000E58 (v02 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FCA000 000B39 (v02 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FCC000 002BAE (v02 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FCF000 0002D4 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x0000000087FE7000 00003C (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x0000000087FE8000 0000BC (v03 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x0000000087FE9000 000094 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x0000000087FEA000 000038 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x0000000087FEC000 000034 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x0000000087FED000 000028 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x0000000087FEE000 000034 (v07 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x0000000087FEF000 0000A5 (v32 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: DBG2 0x0000000087FF0000 000054 (v00 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x0000000087FF1000 000034 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FF2000 0030B3 (v02 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: POAT 0x0000000087FF6000 000055 (v03 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: TPM2 0x0000000087FF7000 000034 (v03 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FF8000 00004B (v02 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FF9000 0004B7 (v02 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x0000000087FFA000 000042 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x0000000087FFB000 000236 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: TCPA 0x0000000087FFC000 000032 (v02 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: DMAR 0x0000000087FC8000 0000A8 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x0000000087FC7000 000044 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000002727fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x2727f8000-0x2727fbfff]
[ 0.000000] [ffffea0000000000-ffffea0009dfffff] PMD ->
[ffff880269e00000-ffff880271dfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000002727fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000073c9dfff]
[ 0.000000] node 0: [mem 0x0000000073cc9000-0x0000000073d78fff]
[ 0.000000] node 0: [mem 0x0000000074679000-0x000000008558dfff]
[ 0.000000] node 0: [mem 0x0000000087ffe000-0x0000000087ffefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000002727fffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000001000-0x00000002727fffff]
[ 0.000000] On node 0 totalpages: 2061313
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8434 pages used for memmap
[ 0.000000] DMA32 zone: 539748 pages, LIFO batch:31
[ 0.000000] Normal zone: 23712 pages used for memmap
[ 0.000000] Normal zone: 1517568 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at
0x8a800000-0x8c7fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x73c9e000-0x73c9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x73c9f000-0x73cc8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x73d79000-0x74678fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8558e000-0x85f7dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x85f7e000-0x87f7dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x87f7e000-0x87ffdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x87fff000-0x880fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88100000-0x88ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89000000-0x8c7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c800000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffa0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa10000-0xffffffff]
[ 0.000000] e820: [mem 0x8c800000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff880272400000 s93016
r8192 d29864 u262144
[ 0.000000] pcpu-alloc: s93016 r8192 d29864 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 2029082
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-4.3.0-1-amd64
root=UUID=9b688b36-f8c5-411b-abf3-f5cf5f78ca7e ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8028492K/8245252K available (5671K kernel code,
1049K rwdata, 2792K rodata, 1296K init, 836K bss, 216760K reserved, 0K
cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:2048 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 2400.048 MHz processor
[ 0.000030] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4800.09 BogoMIPS (lpj=9600192)
[ 0.000032] pid_max: default: 32768 minimum: 301
[ 0.000038] ACPI: Core revision 20150818
[ 0.027302] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.027326] Security Framework initialized
[ 0.027327] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.027333] AppArmor: AppArmor disabled by boot time parameter
[ 0.027831] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.029406] Inode-cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.030071] Mount-cache hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.030080] Mountpoint-cache hash table entries: 16384 (order: 5,
131072 bytes)
[ 0.030274] Initializing cgroup subsys io
[ 0.030278] Initializing cgroup subsys memory
[ 0.030283] Initializing cgroup subsys devices
[ 0.030285] Initializing cgroup subsys freezer
[ 0.030287] Initializing cgroup subsys net_cls
[ 0.030289] Initializing cgroup subsys perf_event
[ 0.030291] Initializing cgroup subsys net_prio
[ 0.030317] CPU: Physical Processor ID: 0
[ 0.030318] CPU: Processor Core ID: 0
[ 0.031578] mce: CPU supports 8 MCE banks
[ 0.031595] CPU0: Thermal monitoring enabled (TM1)
[ 0.031604] process: using mwait in idle threads
[ 0.031606] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.031607] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.031938] Freeing SMP alternatives memory: 20K (ffffffff81c4c000 -
ffffffff81c51000)
[ 0.034940] ftrace: allocating 23601 entries in 93 pages
[ 0.044046] DMAR: Host address width 39
[ 0.044048] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.044054] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap
1c0000c40660462 ecap 7e3ff0505e
[ 0.044056] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.044060] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap
d2008c40660462 ecap f050da
[ 0.044061] DMAR: RMRR base: 0x00000085e7a000 end: 0x00000085e99fff
[ 0.044063] DMAR: RMRR base: 0x0000008a000000 end: 0x0000008c7fffff
[ 0.044065] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.044066] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.044067] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt
out bit.
[ 0.044068] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the
BIOS setting.
[ 0.045497] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.045498] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.049532] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.089256] TSC deadline timer enabled
[ 0.089261] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz
(family: 0x6, model: 0x4e, stepping: 0x3)
[ 0.089286] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake
events, full-width counters, Intel PMU driver.
[ 0.089316] ... version: 4
[ 0.089317] ... bit width: 48
[ 0.089318] ... generic registers: 4
[ 0.089318] ... value mask: 0000ffffffffffff
[ 0.089319] ... max period: 0000ffffffffffff
[ 0.089320] ... fixed-purpose events: 3
[ 0.089321] ... event mask: 000000070000000f
[ 0.089864] x86: Booting SMP configuration:
[ 0.089866] .... node #0, CPUs: #1
[ 0.104344] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[ 0.104412] #2 #3
[ 0.133310] x86: Booted up 1 node, 4 CPUs
[ 0.133313] smpboot: Total of 4 processors activated (19200.38 BogoMIPS)
[ 0.137183] devtmpfs: initialized
[ 0.139320] PM: Registering ACPI NVS region [mem
0x73c9e000-0x73c9efff] (4096 bytes)
[ 0.139322] PM: Registering ACPI NVS region [mem
0x85f7e000-0x87f7dfff] (33554432 bytes)
[ 0.139971] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.140055] pinctrl core: initialized pinctrl subsystem
[ 0.140188] NET: Registered protocol family 16
[ 0.149016] cpuidle: using governor ladder
[ 0.165041] cpuidle: using governor menu
[ 0.165088] Simple Boot Flag at 0x44 set to 0x1
[ 0.165136] ACPI: bus type PCI registered
[ 0.165138] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.165224] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.165227] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.165230] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000]
with a huge-page mapping due to MTRR override.
[ 0.165482] PCI: Using configuration type 1 for base access
[ 0.177388] ACPI: Added _OSI(Module Device)
[ 0.177390] ACPI: Added _OSI(Processor Device)
[ 0.177391] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.177392] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.183571] ACPI: Executed 17 blocks of module-level executable AML code
[ 0.188000] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.191786] ACPI: Dynamic OEM Table Load:
[ 0.191797] ACPI: SSDT 0xFFFF880268743C00 00037F (v02 PmRef Cpu0Cst
00003001 INTL 20121220)
[ 0.192577] ACPI: Dynamic OEM Table Load:
[ 0.192587] ACPI: SSDT 0xFFFF88026989D800 00061E (v02 PmRef Cpu0Ist
00003000 INTL 20121220)
[ 0.194445] ACPI: Dynamic OEM Table Load:
[ 0.194455] ACPI: SSDT 0xFFFF88026989D000 0005AA (v02 PmRef ApIst
00003000 INTL 20121220)
[ 0.195457] ACPI: Dynamic OEM Table Load:
[ 0.195465] ACPI: SSDT 0xFFFF8802698DEE00 000119 (v02 PmRef ApCst
00003000 INTL 20121220)
[ 0.197975] ACPI : EC: EC started
[ 0.200984] ACPI: Interpreter enabled
[ 0.200994] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S1_] (20150818/hwxface-580)
[ 0.201003] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S2_] (20150818/hwxface-580)
[ 0.201030] ACPI: (supports S0 S3 S4 S5)
[ 0.201031] ACPI: Using IOAPIC for interrupt routing
[ 0.201067] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.217804] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.217809] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]
[ 0.220216] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME
AER PCIeCapability]
[ 0.221800] PCI host bridge to bus 0000:00
[ 0.221803] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.221805] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.221807] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.221808] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[ 0.221810] pci_bus 0000:00: root bus resource [mem
0x8c800000-0xdfffffff window]
[ 0.221811] pci_bus 0000:00: root bus resource [mem
0xfd000000-0xfe7fffff window]
[ 0.221819] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[ 0.222422] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[ 0.222436] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[ 0.222443] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff
64bit pref]
[ 0.222447] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.223108] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.223139] pci 0000:00:14.0: reg 0x10: [mem 0xa1300000-0xa130ffff 64bit]
[ 0.223196] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.223779] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.223820] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.223849] pci 0000:00:14.2: reg 0x10: [mem 0xa132a000-0xa132afff 64bit]
[ 0.224490] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.224527] pci 0000:00:16.0: reg 0x10: [mem 0xa132b000-0xa132bfff 64bit]
[ 0.224586] pci 0000:00:16.0: PME# supported from D3hot
[ 0.225206] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.225232] pci 0000:00:17.0: reg 0x10: [mem 0xa1328000-0xa1329fff]
[ 0.225241] pci 0000:00:17.0: reg 0x14: [mem 0xa132e000-0xa132e0ff]
[ 0.225249] pci 0000:00:17.0: reg 0x18: [io 0x4080-0x4087]
[ 0.225258] pci 0000:00:17.0: reg 0x1c: [io 0x4088-0x408b]
[ 0.225266] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
[ 0.225274] pci 0000:00:17.0: reg 0x24: [mem 0xa132c000-0xa132c7ff]
[ 0.225305] pci 0000:00:17.0: PME# supported from D3hot
[ 0.225929] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400
[ 0.225989] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.226585] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.226634] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 0.226695] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.227292] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.227342] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[ 0.228044] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.228059] pci 0000:00:1f.2: reg 0x10: [mem 0xa1324000-0xa1327fff]
[ 0.228713] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[ 0.228752] pci 0000:00:1f.3: reg 0x10: [mem 0xa1320000-0xa1323fff 64bit]
[ 0.228787] pci 0000:00:1f.3: reg 0x20: [mem 0xa1310000-0xa131ffff 64bit]
[ 0.228820] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.231805] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.231847] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.231901] pci 0000:00:1f.4: reg 0x10: [mem 0xa132d000-0xa132d0ff 64bit]
[ 0.231971] pci 0000:00:1f.4: reg 0x20: [io 0x4040-0x405f]
[ 0.232691] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.232731] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.232760] pci 0000:01:00.0: reg 0x18: [mem 0xa1204000-0xa1204fff 64bit]
[ 0.232778] pci 0000:01:00.0: reg 0x20: [mem 0xa1200000-0xa1203fff 64bit]
[ 0.232843] pci 0000:01:00.0: supports D1 D2
[ 0.232844] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.232887] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.241369] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.241372] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.241375] pci 0000:00:1c.0: bridge window [mem 0xa1200000-0xa12fffff]
[ 0.241678] pci 0000:02:00.0: [168c:0042] type 00 class 0x028000
[ 0.242128] pci 0000:02:00.0: reg 0x10: [mem 0xa1000000-0xa11fffff 64bit]
[ 0.243251] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.243598] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.253530] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.253534] pci 0000:00:1c.5: bridge window [mem 0xa1000000-0xa11fffff]
[ 0.254836] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.254889] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12
14 15)
[ 0.254938] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.254987] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.255036] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.255084] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.255132] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.255180] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.255462] platform MSFT0101:00: failed to claim resource 1
[ 0.255524] acpi MSFT0101:00: platform device creation failed: -16
[ 0.256626] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.256718] ACPI : EC: GPE = 0x4f, I/O: command/status = 0x66, data =
0x62
[ 0.256817] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.256819] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.256821] vgaarb: loaded
[ 0.256822] vgaarb: bridge control possible 0000:00:02.0
[ 0.256933] PCI: Using ACPI for IRQ routing
[ 0.285037] PCI: pci_cache_line_size set to 64 bytes
[ 0.285356] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.285357] e820: reserve RAM buffer [mem 0x73c9e000-0x73ffffff]
[ 0.285358] e820: reserve RAM buffer [mem 0x73d79000-0x73ffffff]
[ 0.285359] e820: reserve RAM buffer [mem 0x8558e000-0x87ffffff]
[ 0.285361] e820: reserve RAM buffer [mem 0x87fff000-0x87ffffff]
[ 0.285362] e820: reserve RAM buffer [mem 0x272800000-0x273ffffff]
[ 0.285531] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.285536] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.287581] clocksource: Switched to clocksource hpet
[ 0.292426] pnp: PnP ACPI init
[ 0.292522] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.292524] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.292526] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.292527] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 0.292529] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.292530] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.292532] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.292535] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.293098] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.293100] system 00:01: [io 0xffff] has been reserved
[ 0.293101] system 00:01: [io 0xffff] has been reserved
[ 0.293103] system 00:01: [io 0xffff] has been reserved
[ 0.293105] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.293106] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.293108] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.293198] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.293234] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.293236] system 00:03: Plug and Play ACPI device, IDs INT3f0d
PNP0c02 (active)
[ 0.293261] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.293284] pnp 00:05: Plug and Play ACPI device, IDs ETD0642 ETD0000
PNP0f13 (active)
[ 0.294291] system 00:06: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.294293] system 00:06: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.294294] system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.294296] system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.294297] system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.294299] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294748] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.294750] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.294751] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.294753] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.294755] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.294756] system 00:07: [mem 0xfed90000-0xfed93fff] could not be
reserved
[ 0.294758] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be
reserved
[ 0.294760] system 00:07: [mem 0xff000000-0xffffffff] could not be
reserved
[ 0.294761] system 00:07: [mem 0xfee00000-0xfeefffff] could not be
reserved
[ 0.294763] system 00:07: [mem 0x8c800000-0x8c81ffff] has been reserved
[ 0.294765] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.295979] pnp: PnP ACPI: found 8 devices
[ 0.304397] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[ 0.304417] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.304420] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.304424] pci 0000:00:1c.0: bridge window [mem 0xa1200000-0xa12fffff]
[ 0.304430] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.304434] pci 0000:00:1c.5: bridge window [mem 0xa1000000-0xa11fffff]
[ 0.304441] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.304443] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.304444] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
window]
[ 0.304446] pci_bus 0000:00: resource 7 [mem 0x8c800000-0xdfffffff
window]
[ 0.304447] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff
window]
[ 0.304448] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.304450] pci_bus 0000:01: resource 1 [mem 0xa1200000-0xa12fffff]
[ 0.304451] pci_bus 0000:02: resource 1 [mem 0xa1000000-0xa11fffff]
[ 0.304605] NET: Registered protocol family 2
[ 0.304787] TCP established hash table entries: 65536 (order: 7,
524288 bytes)
[ 0.304918] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.305021] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.305042] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.305067] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.305179] NET: Registered protocol family 1
[ 0.305193] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.306756] PCI: CLS 64 bytes, default 64
[ 0.306795] Unpacking initramfs...
[ 0.388910] Freeing initrd memory: 4764K (ffff8800376a2000 -
ffff880037b49000)
[ 0.388931] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.388934] software IO TLB [mem 0x8158e000-0x8558e000] (64MB) mapped
at [ffff88008158e000-ffff88008558dfff]
[ 0.389067] microcode: CPU0 sig=0x406e3, pf=0x80, revision=0x33
[ 0.389079] microcode: CPU1 sig=0x406e3, pf=0x80, revision=0x33
[ 0.389083] microcode: CPU2 sig=0x406e3, pf=0x80, revision=0x33
[ 0.389092] microcode: CPU3 sig=0x406e3, pf=0x80, revision=0x33
[ 0.389134] microcode: Microcode Update Driver: v2.00
<tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 0.389462] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.389506] audit: initializing netlink subsys (disabled)
[ 0.389519] audit: type=2000 audit(1452160340.400:1): initialized
[ 0.389893] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.389910] zbud: loaded
[ 0.390097] VFS: Disk quotas dquot_6.6.0
[ 0.390133] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[ 0.390978] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 250)
[ 0.391047] io scheduler noop registered
[ 0.391049] io scheduler deadline registered
[ 0.391082] io scheduler cfq registered (default)
[ 0.391776] pcieport 0000:00:1c.0: Signaling PME through PCIe PME
interrupt
[ 0.391778] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.391781] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.391798] pcieport 0000:00:1c.5: Signaling PME through PCIe PME
interrupt
[ 0.391799] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.391802] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.391808] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.391814] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.391834] intel_idle: MWAIT substates: 0x11142120
[ 0.391835] intel_idle: v0.4 model 0x4E
[ 0.391836] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.392090] GHES: HEST is not enabled!
[ 0.392179] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.392725] Linux agpgart interface v0.103
[ 0.392769] AMD IOMMUv2 driver by Joerg Roedel <jroedel at suse.de>
[ 0.392770] AMD IOMMUv2 functionality not available on this system
[ 0.393204] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
at 0x60,0x64 irq 1,12
[ 0.409304] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.409308] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.409479] mousedev: PS/2 mouse device common for all mice
[ 0.409541] rtc_cmos 00:02: RTC can wake from S4
[ 0.410353] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.410434] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes
nvram, hpet irqs
[ 0.410445] Intel P-state driver initializing.
[ 0.410458] intel_pstate: HWP enabled
[ 0.410592] intel_pstate: HWP enabled
[ 0.410726] intel_pstate: HWP enabled
[ 0.410840] intel_pstate: HWP enabled
[ 0.410932] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.411495] NET: Registered protocol family 10
[ 0.411794] mip6: Mobile IPv6
[ 0.411798] NET: Registered protocol family 17
[ 0.411804] mpls_gso: MPLS GSO support
[ 0.412199] registered taskstats version 1
[ 0.412224] zswap: loaded using pool lzo/zbud
[ 0.415231] rtc_cmos 00:02: setting system clock to 2016-01-07
09:52:20 UTC (1452160340)
[ 0.415300] PM: Hibernation image not present or could not be loaded.
[ 0.415673] Freeing unused kernel memory: 1296K (ffffffff81b08000 -
ffffffff81c4c000)
[ 0.415674] Write protecting the kernel read-only data: 10240k
[ 0.416095] Freeing unused kernel memory: 460K (ffff88000158d000 -
ffff880001600000)
[ 0.416393] Freeing unused kernel memory: 1304K (ffff8800018ba000 -
ffff880001a00000)
[ 0.419092] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 0.425229] random: systemd-udevd urandom read with 3 bits of entropy
available
[ 0.457268] SCSI subsystem initialized
[ 0.458424] libata version 3.00 loaded.
[ 0.459245] ahci 0000:00:17.0: version 3.0
[ 0.471832] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps
0x3 impl SATA mode
[ 0.471837] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio
slum part deso sadm sds apst
[ 0.472315] scsi host0: ahci
[ 0.472482] scsi host1: ahci
[ 0.472532] ata1: SATA max UDMA/133 abar m2048 at 0xa132c000 port
0xa132c100 irq 124
[ 0.472546] ata2: SATA max UDMA/133 abar m2048 at 0xa132c000 port
0xa132c180 irq 124
[ 0.800225] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.804249] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.804292] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8HC, G801, max UDMA/100
[ 0.805764] ata1.00: ATA-8: HGST HTS545050A7E660, GR2ZB230, max UDMA/133
[ 0.805772] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 0.807438] ata1.00: configured for UDMA/133
[ 0.808157] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7
B230 PQ: 0 ANSI: 5
[ 0.811542] ata2.00: configured for UDMA/100
[ 0.820668] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8HC
G801 PQ: 0 ANSI: 5
[ 0.834118] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 0.834125] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.834309] sd 0:0:0:0: [sda] Write Protect is off
[ 0.834318] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.834370] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.141767] sda: sda1 sda2 < sda5 > sda3
[ 1.143546] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.388679] tsc: Refined TSC clocksource calibration: 2399.999 MHz
[ 1.388689] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x2298364cab5, max_idle_ns: 440795214892 ns
[ 1.684334] PM: Starting manual resume from disk
[ 1.684344] PM: Hibernation image partition 8:5 present
[ 1.684347] PM: Looking for hibernation image.
[ 1.684561] PM: Image not found (code -22)
[ 1.684564] PM: Hibernation image not present or could not be loaded.
[ 1.827919] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)
[ 2.389765] clocksource: Switched to clocksource tsc
[ 2.667879] random: nonblocking pool is initialized
[ 2.700505] systemd[1]: Failed to insert module 'kdbus': Function not
implemented
[ 2.842616] systemd[1]: systemd 228 running in system mode. (+PAM
+AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 2.842977] systemd[1]: Detected architecture x86-64.
[ 2.854145] systemd[1]: Set hostname to <cyberwarrior>.
[ 4.754887] systemd[1]: NetworkManager-wait-online.service: Cannot
add dependency job, ignoring: Unit NetworkManager-wait-online.service
failed to load: No such file or directory.
[ 4.756746] systemd[1]: Listening on Syslog Socket.
[ 4.756972] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.757102] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ 4.757415] systemd[1]: Created slice User and Session Slice.
[ 4.757503] systemd[1]: Listening on udev Kernel Socket.
[ 4.757537] systemd[1]: Reached target User and Group Name Lookups.
[ 4.757566] systemd[1]: Reached target Encrypted Volumes.
[ 4.757635] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.757717] systemd[1]: Listening on /dev/initctl Compatibility Named
Pipe.
[ 4.757952] systemd[1]: Listening on Journal Audit Socket.
[ 4.758208] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[ 4.758262] systemd[1]: Created slice System Slice.
[ 4.758273] systemd[1]: Reached target Slices.
[ 4.758323] systemd[1]: Created slice system-getty.slice.
[ 4.758370] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 4.758395] systemd[1]: Listening on udev Control Socket.
[ 4.758402] systemd[1]: Reached target Remote File Systems (Pre).
[ 4.758407] systemd[1]: Reached target Remote File Systems.
[ 4.758432] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 4.758453] systemd[1]: Listening on Journal Socket.
[ 4.758752] systemd[1]: Starting Create list of required static
device nodes for the current kernel...
[ 4.806664] systemd[1]: Starting Load Kernel Modules...
[ 4.808211] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.809877] systemd[1]: Starting Nameserver information manager...
[ 4.811416] systemd[1]: Mounting Huge Pages File System...
[ 4.812999] systemd[1]: Starting LSB: Prepare console...
[ 4.814548] systemd[1]: Starting Journal Service...
[ 4.815411] systemd[1]: Mounting Debug File System...
[ 5.031624] systemd[1]: Started Create list of required static device
nodes for the current kernel.
[ 5.033697] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.353762] systemd[1]: Started Journal Service.
[ 5.468699] lp: driver loaded but no devices found
[ 5.496598] ppdev: user-space parallel port driver
[ 5.931785] ACPI: bus type USB registered
[ 5.931923] usbcore: registered new interface driver usbfs
[ 5.932012] usbcore: registered new interface driver hub
[ 5.932109] usbcore: registered new device driver usb
[ 6.259878] usbcore: registered new interface driver ath9k_htc
[ 7.631990] cfg80211: World regulatory domain updated:
[ 7.632002] cfg80211: DFS Master region: unset
[ 7.632007] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7.632017] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 7.632024] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 7.632029] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(N/A, 2000 mBm), (N/A)
[ 7.632036] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 7.632043] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 7.632049] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz),
(N/A, 2000 mBm), (0 s)
[ 7.632054] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz),
(N/A, 2000 mBm), (N/A)
[ 7.632060] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 8.970925] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.056192] systemd-journald[170]: Received request to flush runtime
journal from PID 1
[ 9.235570] ACPI: AC Adapter [ADP0] (on-line)
[ 9.235659] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 9.235708] ACPI: Lid Switch [LID0]
[ 9.235742] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 9.235744] ACPI: Power Button [PWRB]
[ 9.235773] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 9.235775] ACPI: Power Button [PWRF]
[ 9.289454] tpm_crb MSFT0101:00: ioremap of the command buffer failed
[ 9.289521] tpm_crb: probe of MSFT0101:00 failed with error -12
[ 9.373522] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 9.373533] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 1
[ 9.374641] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version
0x100 quirks 0x00109810
[ 9.374649] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 9.375051] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.375056] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 9.375059] usb usb1: Product: xHCI Host Controller
[ 9.375061] usb usb1: Manufacturer: Linux 4.3.0-1-amd64 xhci-hcd
[ 9.375064] usb usb1: SerialNumber: 0000:00:14.0
[ 9.375296] hub 1-0:1.0: USB hub found
[ 9.375321] hub 1-0:1.0: 12 ports detected
[ 9.380736] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 9.380743] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 2
[ 9.380789] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 9.380792] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 9.380794] usb usb2: Product: xHCI Host Controller
[ 9.380797] usb usb2: Manufacturer: Linux 4.3.0-1-amd64 xhci-hcd
[ 9.380799] usb usb2: SerialNumber: 0000:00:14.0
[ 9.381003] hub 2-0:1.0: USB hub found
[ 9.381021] hub 2-0:1.0: 6 ports detected
[ 9.382592] usb: failed to peer usb2-port3 and usb1-port4 by location
(usb2-port3:none) (usb1-port4:usb2-port2)
[ 9.382597] usb usb2-port3: failed to peer to usb1-port4 (-16)
[ 9.382599] usb: port power management may be unreliable
[ 9.383072] usb: failed to peer usb2-port4 and usb1-port4 by location
(usb2-port4:none) (usb1-port4:usb2-port2)
[ 9.383077] usb usb2-port4: failed to peer to usb1-port4 (-16)
[ 9.383559] usb: failed to peer usb2-port5 and usb1-port4 by location
(usb2-port5:none) (usb1-port4:usb2-port2)
[ 9.383563] usb usb2-port5: failed to peer to usb1-port4 (-16)
[ 9.383974] usb: failed to peer usb2-port6 and usb1-port4 by location
(usb2-port6:none) (usb1-port4:usb2-port2)
[ 9.383977] usb usb2-port6: failed to peer to usb1-port4 (-16)
[ 9.415841] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.461630] wmi: Mapper loaded
[ 9.500900] ACPI: Battery Slot [BAT0] (battery present)
[ 9.516236] ACPI Warning: SystemIO range
0x0000000000004040-0x000000000000405F conflicts with OpRegion
0x0000000000004040-0x000000000000404F (\_SB_.PCI0.SBUS.SMBI)
(20150818/utaddress-254)
[ 9.516258] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 9.527767] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 9.622209] hidraw: raw HID events driver (C) Jiri Kosina
[ 9.682030] Bluetooth: Core ver 2.20
[ 9.682071] NET: Registered protocol family 31
[ 9.682076] Bluetooth: HCI device and connection manager initialized
[ 9.682087] Bluetooth: HCI socket layer initialized
[ 9.682095] Bluetooth: L2CAP socket layer initialized
[ 9.682119] Bluetooth: SCO socket layer initialized
[ 9.746979] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 9.755854] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.755882] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 9.774768] Bluetooth: HCI UART driver ver 2.3
[ 9.774771] Bluetooth: HCI UART protocol H4 registered
[ 9.774773] Bluetooth: HCI UART protocol BCSP registered
[ 9.774774] Bluetooth: HCI UART protocol LL registered
[ 9.774775] Bluetooth: HCI UART protocol ATH3K registered
[ 9.774776] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 9.774797] Bluetooth: HCI UART protocol Intel registered
[ 9.774808] Bluetooth: HCI UART protocol BCM registered
[ 9.827547] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.837108] input: Ideapad extra buttons as
/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6
[ 9.837641] r8169 0000:01:00.0 eth0: RTL8168h/8111h at
0xffffc90000c8e000, 50:7b:9d:31:31:13, XID 14100800 IRQ 127
[ 9.837652] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200
bytes, tx checksumming: ko]
[ 9.855150] [drm] Initialized drm 1.1.0 20060810
[ 9.866641] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram
cd/rw xa/form2 cdda tray
[ 9.866645] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 9.866851] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 9.994171] usb 1-4: New USB device found, idVendor=04f2, idProduct=b50e
[ 9.994182] usb 1-4: New USB device strings: Mfr=3, Product=1,
SerialNumber=2
[ 9.994189] usb 1-4: Product: Lenovo EasyCamera
[ 9.994195] usb 1-4: Manufacturer: Chicony Electronics Co.,Ltd.
[ 9.994200] usb 1-4: SerialNumber: 0001
[ 10.158299] [drm] Memory usable by graphics device = 4096M
[ 10.158312] [drm] Replacing VGA console driver
[ 10.160036] Console: switching to colour dummy device 80x25
[ 10.163332] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[ 10.169419] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.169427] [drm] Driver supports precise vblank timestamp query.
[ 10.169876] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 10.207160] i915 0000:00:02.0: firmware: direct-loading firmware
i915/skl_dmc_ver1.bin
[ 10.222958] fbcon: inteldrmfb (fb0) is primary device
[ 10.230259] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.230930] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 10.242098] AVX2 version of gcm_enc/dec engaged.
[ 10.242101] AES CTR mode by8 optimization enabled
[ 10.323460] psmouse serio1: elantech: assuming hardware version 4
(with firmware version 0x594f03)
[ 10.340997] psmouse serio1: elantech: Synaptics capabilities query
result 0x70, 0x15, 0x0a.
[ 10.351934] usb 1-5: New USB device found, idVendor=0bda, idProduct=0129
[ 10.351939] usb 1-5: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 10.351943] usb 1-5: Product: USB2.0-CRW
[ 10.351947] usb 1-5: Manufacturer: Generic
[ 10.351950] usb 1-5: SerialNumber: 20100201396000000
[ 10.356821] psmouse serio1: elantech: Elan sample query result 05, 20, 97
[ 10.450605] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio1/input/input5
[ 10.451966] [drm:intel_dp_aux_ch [i915]] *ERROR* dp aux hw did not
signal timeout (has irq: 1)!
[ 10.467879] [drm:intel_dp_aux_ch [i915]] *ERROR* dp aux hw did not
signal timeout (has irq: 1)!
[ 10.467883] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[ 10.483839] [drm:intel_dp_aux_ch [i915]] *ERROR* dp aux hw did not
signal timeout (has irq: 1)!
[ 10.493753] sha256_ssse3: Using AVX2 optimized SHA-256 implementation
[ 10.499843] [drm:intel_dp_aux_ch [i915]] *ERROR* dp aux hw did not
signal timeout (has irq: 1)!
[ 10.515850] [drm:intel_dp_aux_ch [i915]] *ERROR* dp aux hw did not
signal timeout (has irq: 1)!
[ 10.515869] [drm:intel_dp_aux_ch [i915]] *ERROR* dp_aux_ch not done
status 0xad40001f
[ 10.539844] ------------[ cut here ]------------
[ 10.539872] WARNING: CPU: 2 PID: 371 at
/build/linux-dUKt9u/linux-4.3.3/drivers/gpu/drm/i915/intel_dp.c:854
intel_dp_aux_ch+0x112/0x670 [i915]()
[ 10.539873] dp_aux_ch not started status 0xad40001f
[ 10.539899] Modules linked in: sha256_ssse3 sha256_generic hmac
drbg(+) ansi_cprng aesni_intel(+) i915(+) aes_x86_64 drm_kms_helper
snd_hda_intel snd_hda_codec lrw snd_hda_core i2c_hid sr_mod gf128mul drm
snd_hwdep r8169 mii snd_pcm hci_uart cdrom btbcm snd_timer sg snd
soundcore ideapad_laptop evdev btintel psmouse bluetooth hid glue_helper
ablk_helper cryptd mei_me serio_raw i2c_i801 i2c_algo_bit sparse_keymap
wmi shpchp battery xhci_pci mei xhci_hcd tpm_crb tpm video acpi_pad
button ac processor ath9k_htc ath9k_common ath9k_hw ath mac80211
cfg80211 rfkill usbcore usb_common parport_pc ppdev lp parport autofs4
ext4 crc16 mbcache jbd2 sd_mod ahci libahci libata scsi_mod
[ 10.539901] CPU: 2 PID: 371 Comm: kworker/2:3 Not tainted
4.3.0-1-amd64 #1 Debian 4.3.3-5
[ 10.539901] Hardware name: LENOVO 80Q7/Paris 5A8, BIOS D5CN28WW
08/13/2015
[ 10.539906] Workqueue: events output_poll_execute [drm_kms_helper]
[ 10.539907] 0000000000000000 00000000c1617afb ffffffff812ddce9
ffff880267533988
[ 10.539908] ffffffff81072b1d 00000000ad40001f ffff8802675339e0
00000000fffffff0
[ 10.539909] 0000000000064014 ffff8802679c0000 ffffffff81072bac
ffffffffa076b210
[ 10.539910] Call Trace:
[ 10.539914] [<ffffffff812ddce9>] ? dump_stack+0x40/0x57
[ 10.539916] [<ffffffff81072b1d>] ? warn_slowpath_common+0x7d/0xb0
[ 10.539917] [<ffffffff81072bac>] ? warn_slowpath_fmt+0x5c/0x80
[ 10.539937] [<ffffffffa07291a2>] ? intel_dp_aux_ch+0x112/0x670 [i915]
[ 10.539939] [<ffffffff810b1590>] ? wake_atomic_t_function+0x60/0x60
[ 10.539957] [<ffffffffa07297d0>] ? intel_dp_aux_transfer+0xd0/0x1e0
[i915]
[ 10.539959] [<ffffffff810d7c45>] ? hrtimer_try_to_cancel+0x25/0x100
[ 10.539962] [<ffffffffa0676c78>] ? drm_dp_dpcd_access+0x68/0x110
[drm_kms_helper]
[ 10.539966] [<ffffffffa0676e27>] ? drm_dp_dpcd_write+0x17/0x20
[drm_kms_helper]
[ 10.539986] [<ffffffffa072ba3b>] ? intel_dp_sink_dpms+0x9b/0xe0 [i915]
[ 10.540004] [<ffffffffa0720ae3>] ?
intel_ddi_post_disable+0x173/0x1e0 [i915]
[ 10.540022] [<ffffffffa06fb25b>] ? haswell_crtc_disable+0x12b/0x2c0
[i915]
[ 10.540040] [<ffffffffa0703903>] ? intel_atomic_commit+0x123/0x12f0
[i915]
[ 10.540052] [<ffffffffa05df384>] ? drm_atomic_check_only+0x214/0x540
[drm]
[ 10.540056] [<ffffffffa067e69f>] ?
drm_atomic_helper_set_config+0x1af/0x410 [drm_kms_helper]
[ 10.540064] [<ffffffffa05cf73e>] ?
drm_mode_set_config_internal+0x5e/0xf0 [drm]
[ 10.540068] [<ffffffffa06813ca>] ? restore_fbdev_mode+0xaa/0x110
[drm_kms_helper]
[ 10.540072] [<ffffffffa0683170>] ?
drm_fb_helper_restore_fbdev_mode_unlocked+0x20/0x60 [drm_kms_helper]
[ 10.540075] [<ffffffffa06831d9>] ? drm_fb_helper_set_par+0x29/0x50
[drm_kms_helper]
[ 10.540078] [<ffffffffa0683109>] ?
drm_fb_helper_hotplug_event+0xb9/0x100 [drm_kms_helper]
[ 10.540081] [<ffffffffa067778b>] ? output_poll_execute+0x18b/0x1d0
[drm_kms_helper]
[ 10.540083] [<ffffffff8108a40f>] ? process_one_work+0x19f/0x3d0
[ 10.540084] [<ffffffff8108a68d>] ? worker_thread+0x4d/0x450
[ 10.540085] [<ffffffff8108a640>] ? process_one_work+0x3d0/0x3d0
[ 10.540086] [<ffffffff810904bd>] ? kthread+0xcd/0xf0
[ 10.540088] [<ffffffff810903f0>] ? kthread_create_on_node+0x190/0x190
[ 10.540090] [<ffffffff8158514f>] ? ret_from_fork+0x3f/0x70
[ 10.540092] [<ffffffff810903f0>] ? kthread_create_on_node+0x190/0x190
[ 10.540093] ---[ end trace 880d97cedbcc59af ]---
[ 10.653134] usb 1-7: New USB device found, idVendor=0cf3, idProduct=e360
[ 10.653135] usb 1-7: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 10.986136] usbcore: registered new interface driver btusb
[ 10.987869] bluetooth hci0: firmware: failed to load
qca/rampatch_usb_00000300.bin (-2)
[ 10.987871] bluetooth hci0: Direct firmware load for
qca/rampatch_usb_00000300.bin failed with error -2
[ 10.987872] Bluetooth: hci0: failed to request rampatch file:
qca/rampatch_usb_00000300.bin (-2)
[ 11.036592] media: Linux media interface: v0.10
[ 11.257062] Linux video capture interface: v2.00
[ 11.283123] bluetooth hci0: firmware: failed to load
qca/rampatch_usb_00000300.bin (-2)
[ 11.283126] bluetooth hci0: Direct firmware load for
qca/rampatch_usb_00000300.bin failed with error -2
[ 11.283131] Bluetooth: hci0: failed to request rampatch file:
qca/rampatch_usb_00000300.bin (-2)
[ 11.435762] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b50e)
[ 11.440117] input: Lenovo EasyCamera as
/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input8
[ 11.440249] usbcore: registered new interface driver uvcvideo
[ 11.440250] USB Video Class driver (1.1.1)
[ 11.662745] Adding 3905532k swap on /dev/sda5. Priority:-1 extents:1
across:3905532k FS
[ 11.749560] intel_rapl: Found RAPL domain package
[ 11.749562] intel_rapl: Found RAPL domain core
[ 11.749564] intel_rapl: Found RAPL domain uncore
[ 11.749566] intel_rapl: Found RAPL domain dram
[ 11.797244] [drm] RC6 on
[ 12.166382] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: (null)
[ 12.457546] usbcore: registered new interface driver rtsx_usb
[ 16.752718] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to
enable link training
[ 17.521312] [drm:intel_dp_complete_link_train [i915]] *ERROR* failed
to start channel equalization
[ 18.323697] Console: switching to colour frame buffer device 170x48
[ 18.339048] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 18.339051] [drm] Initialized i915 1.6.0 20150731 for 0000:00:02.0 on
minor 0
[ 18.341743] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 18.463045] snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS
auto-probing.
[ 18.463425] snd_hda_codec_conexant hdaudioC0D0: autoconfig for
CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 18.463430] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 18.463433] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1
(0x16/0x0/0x0/0x0/0x0)
[ 18.463436] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 18.463439] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 18.463442] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a
[ 18.463445] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19
[ 18.464262] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for
stable communication
[ 18.484765] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 18.486038] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 18.486221] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 18.486388] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 18.486555] input: HDA Intel PCH HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 18.486726] input: HDA Intel PCH HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 19.432440] r8169 0000:01:00.0: firmware: direct-loading firmware
rtl_nic/rtl8168h-2.fw
[ 19.449540] r8169 0000:01:00.0 eth0: link down
[ 19.449628] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.107532] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.107541] Bluetooth: BNEP filters: protocol multicast
[ 23.107551] Bluetooth: BNEP socket layer initialized
[ 39.983049] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 235.319208] usb 1-3: new high-speed USB device number 5 using xhci_hcd
[ 235.505293] usb 1-3: New USB device found, idVendor=0bc2, idProduct=5031
[ 235.505306] usb 1-3: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 235.505313] usb 1-3: Product: FreeAgent GoFlex
[ 235.505318] usb 1-3: Manufacturer: Seagate
[ 235.505323] usb 1-3: SerialNumber: NA0FJWN6
[ 235.540973] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 235.541211] scsi host2: usb-storage 1-3:1.0
[ 235.541480] usbcore: registered new interface driver usb-storage
[ 235.555820] usbcore: registered new interface driver uas
[ 236.552367] scsi 2:0:0:0: Direct-Access Seagate FreeAgent
GoFlex 214 PQ: 0 ANSI: 0
[ 236.554091] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 236.554191] sd 2:0:0:0: [sdb] 976773167 512-byte logical blocks: (500
GB/465 GiB)
[ 236.554543] sd 2:0:0:0: [sdb] Write Protect is off
[ 236.554559] sd 2:0:0:0: [sdb] Mode Sense: 0f 00 00 00
[ 236.554893] sd 2:0:0:0: [sdb] No Caching mode page found
[ 236.554906] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 236.596765] sdb: sdb1
[ 236.598555] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 237.154309] fuse init (API version 7.23)
More information about the ath10k
mailing list