request: ACK timing setting required

[Ben Greear]

On 05/25/2015 10:48 AM, Sebastian Gottschall wrote:
> Am 25.05.2015 um 19:13 schrieb Ben Greear:
>>
>>
>> On 05/25/2015 10:10 AM, Sebastian Gottschall wrote:
>>> Hello
>>>
>>> could it be possible to add a ACK timing feature to the ath10k firmware (QCA9880 internal register 0x8014, mask 0x3FFF)
>>
>> You just need ability to set this register to some value?
>>
>> If so, probably something I could add to CT firmware, at least.
>>
> not alone. this register is rewritten on each reset (channel change etc.) so it needs to be correct handled.
> yes. just writing and handling the ack value would be enough. the math behind is no problem.
> otherwise its impossible todo long range links with ath10k. (LSDK based firmware from compex do support this feature unlike ath10k)

I'll see if I can add this to my firmware, probably will be a few days before I can get
time to work on it.  Will post to list when I have a FW build ready for testing.

Thanks,
Ben

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com