[PATCH] ath10k: harmonize error case handling in ath10k_core_start
Nicholas Mc Guire
hofrat at osadl.org
Mon Mar 16 01:48:57 PDT 2015
All of the bringup/init functions called in ath10k_core_start return 0
on success and != 0 on failure. ath10k_wmi_wait_for_service_ready(),
ath10k_wmi_wait_for_unified_ready() and their call sites were adjusted
to fit this model.
The return type of wait_for_completion_timeout is unsigned long not int so
ath10k_wmi_wait_for_service_ready() and ath10k_wmi_wait_for_unified_ready()
were fixed up accordingly.
Signed-off-by: Nicholas Mc Guire <hofrat at osadl.org>
---
This was initially in two separate patches which were joined as suggested
by Sergei Shtylyov <sergei.shtylyov at cogentembedded.com> to ensure that it
will not break bisection - thanks!
Patch was only compile test with x86_64_defconfig + CONFIG_ATH_CARDS=m,
CONFIG_ATH10K=m
Patch is against 4.0-rc3 (localversion-next is -next-20150316)
drivers/net/wireless/ath/ath10k/core.c | 6 ++----
drivers/net/wireless/ath/ath10k/wmi.c | 20 ++++++++++++--------
2 files changed, 14 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index c0e454b..e97069f 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -1080,9 +1080,8 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
if (mode == ATH10K_FIRMWARE_MODE_NORMAL) {
status = ath10k_wmi_wait_for_service_ready(ar);
- if (status <= 0) {
+ if (status) {
ath10k_warn(ar, "wmi service ready event not received");
- status = -ETIMEDOUT;
goto err_hif_stop;
}
}
@@ -1098,9 +1097,8 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
}
status = ath10k_wmi_wait_for_unified_ready(ar);
- if (status <= 0) {
+ if (status) {
ath10k_err(ar, "wmi unified ready event not received\n");
- status = -ETIMEDOUT;
goto err_hif_stop;
}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index c7ea77e..19ed27a 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -884,20 +884,24 @@ void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
int ath10k_wmi_wait_for_service_ready(struct ath10k *ar)
{
- int ret;
+ unsigned long time_left;
- ret = wait_for_completion_timeout(&ar->wmi.service_ready,
- WMI_SERVICE_READY_TIMEOUT_HZ);
- return ret;
+ time_left = wait_for_completion_timeout(&ar->wmi.service_ready,
+ WMI_SERVICE_READY_TIMEOUT_HZ);
+ if (!time_left)
+ return -ETIMEDOUT;
+ return 0;
}
int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar)
{
- int ret;
+ unsigned long time_left;
- ret = wait_for_completion_timeout(&ar->wmi.unified_ready,
- WMI_UNIFIED_READY_TIMEOUT_HZ);
- return ret;
+ time_left = wait_for_completion_timeout(&ar->wmi.unified_ready,
+ WMI_UNIFIED_READY_TIMEOUT_HZ);
+ if (!time_left)
+ return -ETIMEDOUT;
+ return 0;
}
struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len)
--
1.7.10.4
More information about the ath10k
mailing list