[PATCH] ath10k: Debugfs entry to enable/disable BTC feature

[Kalle Valo]

"Li, Yanbo" <yanbol at qca.qualcomm.com> writes:

>> -----Original Message-----
>> From: Valo, Kalle
>> Sent: Wednesday, May 27, 2015 5:57 AM
>> To: Li, Yanbo
>> Cc: dreamfly281 at gmail.com; linux-wireless at vger.kernel.org;
>> michal.kazior at tieto.com; ath10k at lists.infradead.org
>> Subject: Re: [PATCH] ath10k: Debugfs entry to enable/disable BTC feature
>> 
>> Yanbo Li <yanbol at qca.qualcomm.com> writes:
>> 
>> > As some radio have no connection with BT modules, enable the BTC
>> > feature will has some side effect if the radio's GPIO connect with any
>> > other HW modules. Add the control switcher "btc_feature" at debugfs
>> > and set the feature as disable by default to avoid such case.
>> >
>> > To enable this feature, execute:
>> > echo 1 > /sys/kernel/debug/ieee80211/phyX/ath10k/btc_feature
>> > To disable:
>> > echo 0 > /sys/kernel/debug/ieee80211/phyX/ath10k/btc_feature
>> 
>> I suspect "BTC" does not really tell much for most of the people and
>> acronyms should be always spelled out at least once.
>> 
>> > Signed-off-by: Yanbo Li <yanbol at qca.qualcomm.com>
>> >
>> > diff --git a/drivers/net/wireless/ath/ath10k/core.h
>> > b/drivers/net/wireless/ath/ath10k/core.h
>> > index 8444adf42195..6852e7fc5d5f 100644
>> > --- a/drivers/net/wireless/ath/ath10k/core.h
>> > +++ b/drivers/net/wireless/ath/ath10k/core.h
>> > @@ -720,6 +720,8 @@ struct ath10k {
>> >  		u32 fw_cold_reset_counter;
>> >  	} stats;
>> >
>> > +	bool btc_feature;
>> 
>> Could we use ar->dev_flags instead?
>
> This dev_flags currently used to mark some status, like the cradh, CAC running, 
> The BTcoex feature is more likely a HW feature,  there are seems different set. 
>
> Maybe a separately hw_feature_flag is needed as there are some other HW feature 
> That we want to enable/disable from user space. 

I think we don't need a separate bitmap, we can use dev_flags just fine
for this.

>> > +static ssize_t ath10k_write_btc_feature(struct file *file,
>> > +					const char __user *ubuf,
>> > +					size_t count, loff_t *ppos)
>> > +{
>> > +	struct ath10k *ar = file->private_data;
>> > +	char buf[32];
>> > +	size_t buf_size;
>> > +	bool val;
>> > +
>> > +	buf_size = min(count, (sizeof(buf) - 1));
>> > +	if (copy_from_user(buf, ubuf, buf_size))
>> > +		return -EFAULT;
>> > +
>> > +	buf[buf_size] = '\0';
>> > +	if (strtobool(buf, &val) != 0) {
>> > +		ath10k_warn(ar, "Wrong BTC feature setting\n");
>> > +		return -EINVAL;
>> > +	}
>> > +
>> > +	mutex_lock(&ar->conf_mutex);
>> > +	ar->btc_feature = val;
>> > +	queue_work(ar->workqueue, &ar->restart_work);
>> > +	mutex_unlock(&ar->conf_mutex);
>> 
>> Shouldn't we test ATH10K_STATE_ON first?
>
> The restart process will judge by itself whether the device is on or not, and print below warning in that case:
>
> [797424.496190] ath10k_pci 0000:05:00.0: cannot restart a device that
> hasn't been started

That's just buggy, ath10k should not print anything if a setting is
changed while interface is down. It's much better we have the check for
ATH10K_STATE_ON here.

-- 
Kalle Valo