[PATCH 2/3] ath10k: add support for qca6174 Rx descriptors
Michal Kazior
michal.kazior at tieto.com
Fri Jan 16 03:20:36 PST 2015
The QCA6174 chip has an extra 4 bytes in
rx_ppdu_end structure which is used in htt_rx_desc
and HTT Rx ring offset setup. This is necessary
for correct Rx for QCA6174 (otherwise Rx
descriptors are overwritten and corrupted).
This means QCA988X will have an extra 4 byte
padding in Rx descriptor layout which is harmless.
Signed-off-by: Michal Kazior <michal.kazior at tieto.com>
---
drivers/net/wireless/ath/ath10k/htt_rx.c | 2 +-
drivers/net/wireless/ath/ath10k/rx_desc.h | 25 ++++++++++++++++++++++++-
2 files changed, 25 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index baa1c44..143728f 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -696,7 +696,7 @@ static void ath10k_htt_rx_h_mactime(struct ath10k *ar,
*
* FIXME: Can we get/compute 64bit TSF?
*/
- status->mactime = __le32_to_cpu(rxd->ppdu_end.tsf_timestamp);
+ status->mactime = __le32_to_cpu(rxd->ppdu_end.common.tsf_timestamp);
status->flag |= RX_FLAG_MACTIME_END;
}
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
index e1ffdd5..e9cc778 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -850,7 +850,7 @@ struct rx_ppdu_start {
#define RX_PPDU_END_INFO1_PPDU_DONE (1 << 15)
-struct rx_ppdu_end {
+struct rx_ppdu_end_common {
__le32 evm_p0;
__le32 evm_p1;
__le32 evm_p2;
@@ -873,10 +873,33 @@ struct rx_ppdu_end {
u8 phy_err_code;
__le16 flags; /* %RX_PPDU_END_FLAGS_ */
__le32 info0; /* %RX_PPDU_END_INFO0_ */
+} __packed;
+
+struct rx_ppdu_end_qca988x {
__le16 bb_length;
__le16 info1; /* %RX_PPDU_END_INFO1_ */
} __packed;
+#define RX_PPDU_END_RTT_CORRELATION_VALUE_MASK 0x00ffffff
+#define RX_PPDU_END_RTT_CORRELATION_VALUE_LSB 0
+#define RX_PPDU_END_RTT_UNUSED_MASK 0x7f000000
+#define RX_PPDU_END_RTT_UNUSED_LSB 24
+#define RX_PPDU_END_RTT_NORMAL_MODE BIT(31)
+
+struct rx_ppdu_end_qca6174 {
+ __le32 rtt; /* %RX_PPDU_END_RTT_ */
+ __le16 bb_length;
+ __le16 info1; /* %RX_PPDU_END_INFO1_ */
+} __packed;
+
+struct rx_ppdu_end {
+ struct rx_ppdu_end_common common;
+ union {
+ struct rx_ppdu_end_qca988x qca988x;
+ struct rx_ppdu_end_qca6174 qca6174;
+ } __packed;
+} __packed;
+
/*
* evm_p0
* EVM for pilot 0. Contain EVM for streams: 0, 1, 2 and 3.
--
1.8.5.3
More information about the ath10k
mailing list