Compex WLE900N5-23

[Yeoh Chun-Yeow]

Kernel version: 3.18.11 (OpenWRT based platform latest trunk)

[   12.690000] Loading modules backported from Linux version
master-2015-03-09-0-g141f155
[   12.700000] Backport generated by backports.git backports-20150129-0-gdd4a670

This is the configuration:
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
hw_mode=a
channel=36

ieee80211n=1
ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][MAX-AMSDU-7935][DSSS_CCK-40]
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx=42
ieee80211ac=1
vht_capab=[RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN][RX-STBC1][MAX-MPDU-11454][MAX-A-MPDU-LEN-EXP7]

interface=wlan0
ctrl_interface=/var/run/hostapd
disassoc_low_ack=1
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
auth_algs=1
wpa=0
ssid=ath10k
bridge=br-lan
bssid=04:f0:21:0c:a5:44

Attached is the kernel log. Let me know what can I do.

----
Chun-Yeow

On Thu, Apr 30, 2015 at 11:02 AM, Kalle Valo <kvalo at qca.qualcomm.com> wrote:
> Yeoh Chun-Yeow <yeohchunyeow at gmail.com> writes:
>
>> I am using the above WiFi card and found out that it can only use the
>> firmware-2.bin_10.1.467.2-1 (10.1), but not 10.2 or 10.3 (firmware
>> crashed) for AP mode.
>>
>> Is that any reason of this?
>
> I can't think of any reason from top of my head. Can you send full
> (complete) kernel logs and information what kernel and ath10k version
> you are using?
>
> --
> Kalle Valo
-------------- next part --------------
A non-text attachment was scrubbed...
Name: kernel.log
Type: text/x-log
Size: 24113 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/ath10k/attachments/20150430/ce241028/attachment-0001.bin>