[PATCH v2 1/2] ath10k: add register access debugfs interface

[Michal Kazior]

On 25 November 2014 at 09:39, Kalle Valo <kvalo at qca.qualcomm.com> wrote:
> Kalle Valo <kvalo at qca.qualcomm.com> writes:
>
>> +static ssize_t ath10k_reg_value_read(struct file *file,
>> +                                  char __user *user_buf,
>> +                                  size_t count, loff_t *ppos)
>> +{
>> +     struct ath10k *ar = file->private_data;
>> +     u8 buf[48];
>> +     unsigned int len;
>> +     u32 reg_addr, reg_val;
>> +
>> +     spin_lock_bh(&ar->data_lock);
>> +     reg_addr = ar->debug.reg_addr;
>> +     spin_unlock_bh(&ar->data_lock);
>> +
>> +     reg_val = ath10k_hif_read32(ar, reg_addr);
>> +     len = scnprintf(buf, sizeof(buf), "0x%08x:0x%08x\n", reg_addr, reg_val);
>> +
>> +     return simple_read_from_buffer(user_buf, count, ppos, buf, len);
>> +}
>
> I just realised that we need to check ar->state to make sure that
> firmware is running. Because of that I'll need to change the data_lock
> to conf_mutex as well.

Hmm.. It could actually work without firmware running. It just reads MMIO.

The problem I see now is the target may not be awake (Bartosz recently
fixed suspend bug by moving ath10k_pci_wake/sleep back to
hif_power_up) and accessing target registers without it being fully
awake can lead to host memory corruption. I guess ar->state will do
for now because getting this to work otherwise is going to be a little
tricky.


Michał