[PATCH] ath10k: Improve 'hard' simulate fw crash.

[greearb at candelatech.com]

From: Ben Greear <greearb at candelatech.com>

Different firmware may support different numbers of
vdevs.  Use value that is always out of range for all
firmware.

Signed-off-by: Ben Greear <greearb at candelatech.com>
---
 drivers/net/wireless/ath/ath10k/debug.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 3030158..c9e35c87e 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -531,7 +531,10 @@ static ssize_t ath10k_write_simulate_fw_crash(struct file *file,
 		ret = ath10k_wmi_force_fw_hang(ar, WMI_FORCE_FW_HANG_ASSERT, 0);
 	} else if (!strcmp(buf, "hard")) {
 		ath10k_info("simulating hard firmware crash\n");
-		ret = ath10k_wmi_vdev_set_param(ar, TARGET_NUM_VDEVS + 1,
+		/* 0x7fff is vdev id, and it is always out of range for all
+		 * firmware variants in order to force a firmware crash.
+		 */
+		ret = ath10k_wmi_vdev_set_param(ar, 0x7fff,
 					ar->wmi.vdev_param->rts_threshold, 0);
 	} else {
 		ret = -EINVAL;
-- 
1.7.11.7