Anyone done long term testing?
Kalle Valo
kvalo at qca.qualcomm.com
Fri Jan 24 14:18:34 EST 2014
Ben Greear <greearb at candelatech.com> writes:
> On 01/24/2014 11:03 AM, Kalle Valo wrote:
>> Ben Greear <greearb at candelatech.com> writes:
>>
>>> I left an ath10k system up overnight, running 128kbps traffic on each
>>> of 32 stations, and by morning, the machine was OOM.
>>
>> Did you see SWBA overrun warnings before the OOM? I saw one report of
>> such issue. This patch should help with that:
>>
>> 748afc4 ath10k: implement and use new beacon method
>>
>>> Just curious if anyone had done overnight traffic runs with any luck?
>>
>> I'm running our AP135 board with ath9k+ath10k as my main AP and have
>> seen SWBA overruns few times, otherwise it has been pretty stable. But I
>> haven't yet tested with the patch above to see if the SWBA overruns are
>> really gone.
>
> I didn't notice any SWBA warnings, but perhaps they were there.
> I'll keep a look out for them if it happens again.
>
> I'm also running in station mode, with lots of station vifs, so might be
> hitting some issue specific to that. I guess in station mode I shouldn't
> be sending any beacons anyway, so probably not the beacon issue.
Heh, I didn't realise that you were using station mode. Then most likely
you are seeing something else.
--
Kalle Valo
More information about the ath10k
mailing list