Anyone have luck with WLE900VX?

Adrian Chadd adrian at
Mon Feb 24 18:49:48 EST 2014

... which default table does it say it wants?


On 24 February 2014 15:47, Ben Greear <greearb at> wrote:
> On 02/22/2014 11:24 AM, Adrian Chadd wrote:
>> Check the firmware source; the MAC is read out of caldata and I
>> believe the default is (random three digits) + 12:34:56
>> So maybe the board didn't reset fully and the OTP or EEPROM didn't
>> load? You should be able to read the OTP data via the memory mapped
>> registers exposed to the host, as long as you know how to read OTP.
>> :-P
> Looks like my problem is just old firmware that does not have the
> EEPROM reference tables needed by the WLE900VX.
> But, if I hack on the OTP logic and make it use a reference table
> for the reference design the NIC claims (XB140), then the NIC does
> show up as 3x3, and gets proper MAC, etc.
> This is a nasty hack, but maybe it will hold me over until I
> can get access to a more proper solution.
> Thanks,
> Ben
> --
> Ben Greear <greearb at>
> Candela Technologies Inc

More information about the ath10k mailing list