Report Firmware firmware-2.bin_10.1.467.2-1 Error

[Yeoh Chun-Yeow]

> To be clear - ath10k is incapable of reporting "tx bitrate" (it always
> reports 6mbps). If you want to verify if the bitrate mask works you
> must check "rx bitrate" on the other side, i.e. on the connected
> client.
>
> Or just use a separate sniffer and see if AP is sends frames with
> different txpower/bitrate values.
>

For TxRate, another option would be looking at
"/sys/kernel/debug/ieee80211/phy0/ath10k/fw_stats".

----
Chun-Yeow