ath10k hits warning in sta_info.c:839.

[Michal Kazior]

On 23 October 2013 00:22, Ben Greear <greearb at candelatech.com> wrote:
> On 10/22/2013 11:25 AM, Ben Greear wrote:
>> Kernel is stock 'ath' tree, with small printk to debug an ath10k
>> crash.
>>
>> This is FYI for now...will be looking at other ath10k crash bugs
>> before digging into this tone.
>>
>> Setup is 2 stations trying to associate to same AP, which causes
>> endless failures and firmware crashes.  Good for chasing bugs :)
>>
>>
>> DMAR:[fault reason 05] PTE Write access is not set
>> dmar: DRHD: handling fault status reg 3
>> dmar: DMAR:[DMA Write] Request device [05:00.0] fault addr ffd52000
>> DMAR:[fault reason 05] PTE Write access is not set
>> dmar: DRHD: handling fault status reg 3
>> dmar: DMAR:[DMA Write] Request device [05:00.0] fault addr ffd52000
>> DMAR:[fault reason 05] PTE Write access is not set
>>
>> sta300: authentication with 00:03:83:3d:30:aa timed out
>> [root at ct523-9292 ~]# ath10k: Failed to delete peer: 00:03:83:3d:30:aa for VDEV: 1
>> ath10k: WMI vdev stop failed: ret -108
>
>> ------------[ cut here ]------------
>> WARNING: CPU: 1 PID: 6 at /mnt/sda/home/greearb/git/ath/net/mac80211/sta_info.c:839 __sta_info_destroy+0x12)
>> Modules linked in: nf_nat_ipv4 nf_nat veth 8021q garp stp mrp llc macvlan pktgen lockd f71882fg coretemp hw]
>
> I think this may be a result of whatever bug or limitation
> caused the firmware to error and/or crash when adding a second
> station VIF and trying to associate it to the same AP.
>
> Probably not a problem with the rest of the wifi stacks.

Yup. This originates from the firmware limitation. It's unable to
handle two peer nodes with same mac addr on different vdevs. That's
why it's impossible to associate 2 (or more) station interfaces to the
same BSS.


Michał