[PATCH] ath10k: add error handling to ath10k_pci_wait()
Kalle Valo
kvalo at qca.qualcomm.com
Thu Oct 17 04:36:15 EDT 2013
ath10k_pci_wait() didn't notify any errors to callers, it
just printed a warning so add proper error handling.
Signed-off-by: Kalle Valo <kvalo at qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/pci.c | 28 ++++++++++++++++++++++++----
1 file changed, 24 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 1e9cfcc9..92759cd 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -525,15 +525,19 @@ static bool ath10k_pci_target_is_awake(struct ath10k *ar)
return (RTC_STATE_V_GET(val) == RTC_STATE_V_ON);
}
-static void ath10k_pci_wait(struct ath10k *ar)
+static int ath10k_pci_wait(struct ath10k *ar)
{
int n = 100;
while (n-- && !ath10k_pci_target_is_awake(ar))
msleep(10);
- if (n < 0)
+ if (n < 0) {
ath10k_warn("Unable to wakeup target\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
}
int ath10k_do_pci_wake(struct ath10k *ar)
@@ -2227,7 +2231,13 @@ static int ath10k_pci_start_intr_legacy(struct ath10k *ar)
ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS +
PCIE_SOC_WAKE_ADDRESS);
- ath10k_pci_wait(ar);
+ ret = ath10k_pci_wait(ar);
+ if (ret) {
+ ath10k_warn("Failed to enable legacy interrupt, target did not wake up: %d\n",
+ ret);
+ free_irq(ar_pci->pdev->irq, ar);
+ return ret;
+ }
/*
* A potential race occurs here: The CORE_BASE write
@@ -2290,6 +2300,10 @@ static int ath10k_pci_start_intr(struct ath10k *ar)
}
ret = ath10k_pci_start_intr_legacy(ar);
+ if (ret) {
+ ath10k_warn("Failed to start legacy interrupts: %d\n", ret);
+ return ret;
+ }
exit:
ar_pci->num_msi_intrs = num;
@@ -2315,13 +2329,19 @@ static int ath10k_pci_reset_target(struct ath10k *ar)
{
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
int wait_limit = 300; /* 3 sec */
+ int ret;
/* Wait for Target to finish initialization before we proceed. */
iowrite32(PCIE_SOC_WAKE_V_MASK,
ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS +
PCIE_SOC_WAKE_ADDRESS);
- ath10k_pci_wait(ar);
+ ret = ath10k_pci_wait(ar);
+ if (ret) {
+ ath10k_warn("Failed to reset target, target did not wake up: %d\n",
+ ret);
+ return ret;
+ }
while (wait_limit-- &&
!(ioread32(ar_pci->mem + FW_INDICATOR_ADDRESS) &
More information about the ath10k
mailing list