[PATCH 6/8] ath10k: extract functions for legacy irq handling
Michal Kazior
michal.kazior at tieto.com
Fri Nov 22 08:05:16 EST 2013
Preparation for code re-use. Also use ioread/write
wrappers.
Signed-off-by: Michal Kazior <michal.kazior at tieto.com>
---
drivers/net/wireless/ath/ath10k/pci.c | 68 +++++++++++++++++------------------
1 file changed, 33 insertions(+), 35 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index fa1162e..a9bc290 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2096,6 +2096,34 @@ static bool ath10k_pci_irq_pending(struct ath10k *ar)
return false;
}
+static void ath10k_pci_disable_and_clear_legacy_irq(struct ath10k *ar)
+{
+ /* IMPORTANT: INTR_CLR register has to be set after
+ * INTR_ENABLE is set to 0, otherwise interrupt can not be
+ * really cleared. */
+ ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_ENABLE_ADDRESS,
+ 0);
+ ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_CLR_ADDRESS,
+ PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL);
+
+ /* IMPORTANT: this extra read transaction is required to
+ * flush the posted write buffer. */
+ (void) ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
+ PCIE_INTR_ENABLE_ADDRESS);
+}
+
+static void ath10k_pci_enable_legacy_irq(struct ath10k *ar)
+{
+ ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
+ PCIE_INTR_ENABLE_ADDRESS,
+ PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL);
+
+ /* IMPORTANT: this extra read transaction is required to
+ * flush the posted write buffer. */
+ (void) ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
+ PCIE_INTR_ENABLE_ADDRESS);
+}
+
/*
* Top-level interrupt handler for all PCI interrupts from a Target.
* When a block of MSI interrupts is allocated, this top-level handler
@@ -2109,27 +2137,8 @@ static irqreturn_t ath10k_pci_interrupt_handler(int irq, void *arg)
if (!ath10k_pci_irq_pending(ar))
return IRQ_NONE;
- if (ar_pci->num_msi_intrs == 0) {
- /*
- * IMPORTANT: INTR_CLR regiser has to be set after
- * INTR_ENABLE is set to 0, otherwise interrupt can not be
- * really cleared.
- */
- iowrite32(0, ar_pci->mem +
- (SOC_CORE_BASE_ADDRESS |
- PCIE_INTR_ENABLE_ADDRESS));
- iowrite32(PCIE_INTR_FIRMWARE_MASK |
- PCIE_INTR_CE_MASK_ALL,
- ar_pci->mem + (SOC_CORE_BASE_ADDRESS |
- PCIE_INTR_CLR_ADDRESS));
- /*
- * IMPORTANT: this extra read transaction is required to
- * flush the posted write buffer.
- */
- (void) ioread32(ar_pci->mem +
- (SOC_CORE_BASE_ADDRESS |
- PCIE_INTR_ENABLE_ADDRESS));
- }
+ if (ar_pci->num_msi_intrs == 0)
+ ath10k_pci_disable_and_clear_legacy_irq(ar);
tasklet_schedule(&ar_pci->intr_tq);
@@ -2144,20 +2153,9 @@ static void ath10k_pci_tasklet(unsigned long data)
ath10k_pci_fw_interrupt_handler(ar); /* FIXME: Handle FW error */
ath10k_ce_per_engine_service_any(ar);
- if (ar_pci->num_msi_intrs == 0) {
- /* Enable Legacy PCI line interrupts */
- iowrite32(PCIE_INTR_FIRMWARE_MASK |
- PCIE_INTR_CE_MASK_ALL,
- ar_pci->mem + (SOC_CORE_BASE_ADDRESS |
- PCIE_INTR_ENABLE_ADDRESS));
- /*
- * IMPORTANT: this extra read transaction is required to
- * flush the posted write buffer
- */
- (void) ioread32(ar_pci->mem +
- (SOC_CORE_BASE_ADDRESS |
- PCIE_INTR_ENABLE_ADDRESS));
- }
+ /* Re-enable legacy irq that was disabled in the irq handler */
+ if (ar_pci->num_msi_intrs == 0)
+ ath10k_pci_enable_legacy_irq(ar);
}
static int ath10k_pci_request_irq_msix(struct ath10k *ar)
--
1.8.4.rc3
More information about the ath10k
mailing list