[PATCH v2] ath10k: add set_bitrate_mask callback
Janusz Dziedzic
janusz.dziedzic at tieto.com
Mon Dec 23 10:42:56 EST 2013
Add set_bitrate_mask callback. Currently
ath10k HW is limited to handle only single
fixed rate setting or limit number of used
spatial streams.
Example:
iw wlanX set bitrates legacy-5 ht-mcs-5 vht-mcs-5 2:9
will setup VHT, nss=2, mcs=9
iw wlanX set bitrates legacy-5 18 ht-mcs-5 vht-mcs-5
will setup legacy, 18Mbps
iw wlanX set bitrates legacy-5 ht-mcs-5 3 vht-mcs-5
will setup HT, nss=1, mcs=3
iw wlanX set bitrate legacy-5 ht-mcs-5 vht-mcs-5 1:0-9
will setup nss=1
iw wlanX set bitrate legacy-5 ht-mcs-5 vht-mcs-5 1:0-9 2:0-9
will setup nss=2
Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
---
Depends on, nl80211: add VHT support for set_bitrate_mask
iw setup example base on, iw: add VHT MCS/NSS set support to set bitrates
*V2 - fix sparse error, fix documentation
drivers/net/wireless/ath/ath10k/core.h | 3 +
drivers/net/wireless/ath/ath10k/mac.c | 294 ++++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.h | 12 ++
3 files changed, 309 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 79726e0..3817e32 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -253,6 +253,9 @@ struct ath10k_vif {
u8 bssid[ETH_ALEN];
} ibss;
} u;
+
+ u8 fixed_rate;
+ u8 fixed_nss;
};
struct ath10k_vif_iter {
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index ce9ef349..d909ab2 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3310,6 +3310,299 @@ exit:
return ret;
}
+/* Helper table for legacy fixed_rate/bitrate_mask */
+static const u8 cck_ofdm_rate[] = {
+ /* CCK */
+ 3, /* 1Mbps */
+ 2, /* 2Mbps */
+ 1, /* 5.5Mbps */
+ 0, /* 11Mbps */
+ /* OFDM */
+ 3, /* 6Mbps */
+ 7, /* 9Mbps */
+ 2, /* 12Mbps */
+ 6, /* 18Mbps */
+ 1, /* 24Mbps */
+ 5, /* 36Mbps */
+ 0, /* 48Mbps */
+ 4, /* 54Mbps */
+};
+
+/* Check if only one bit set */
+static int ath10k_check_single_mask(u32 mask)
+{
+ int bit;
+
+ bit = ffs(mask);
+ if (!bit)
+ return 0;
+
+ mask &= ~BIT(bit - 1);
+ if (mask)
+ return 2;
+
+ return 1;
+}
+
+static bool
+ath10k_default_bitrate_mask(struct ath10k *ar,
+ enum ieee80211_band band,
+ const struct cfg80211_bitrate_mask *mask)
+{
+ u32 legacy = 0x00ff;
+ u8 ht = 0xff, i;
+ u16 vht = 0x3ff;
+
+ switch (band) {
+ case IEEE80211_BAND_2GHZ:
+ legacy = 0x00fff;
+ vht = 0;
+ break;
+ case IEEE80211_BAND_5GHZ:
+ break;
+ default:
+ return false;
+ }
+
+ if (mask->control[band].legacy != legacy)
+ return false;
+
+ for (i = 0; i < ar->num_rf_chains; i++)
+ if (mask->control[band].ht_mcs[i] != ht)
+ return false;
+
+ for (i = 0; i < ar->num_rf_chains; i++)
+ if (mask->control[band].vht_mcs[i] != vht)
+ return false;
+
+ return true;
+}
+
+static bool
+ath10k_bitrate_mask_nss(const struct cfg80211_bitrate_mask *mask,
+ enum ieee80211_band band,
+ u8 *fixed_nss)
+{
+ int ht_nss = 0, vht_nss = 0, i;
+
+ /* check legacy */
+ if (ath10k_check_single_mask(mask->control[band].legacy))
+ return false;
+
+ /* check HT */
+ for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++) {
+ if (mask->control[band].ht_mcs[i] == 0xff)
+ continue;
+ else if (mask->control[band].ht_mcs[i] == 0x00)
+ break;
+ else
+ return false;
+ }
+
+ ht_nss = i;
+
+ /* check VHT */
+ for (i = 0; i < NL80211_VHT_NSS_MAX; i++) {
+ if (mask->control[band].vht_mcs[i] == 0x03ff)
+ continue;
+ else if (mask->control[band].vht_mcs[i] == 0x0000)
+ break;
+ else
+ return false;
+ }
+
+ vht_nss = i;
+
+ if (ht_nss > 0 && vht_nss > 0)
+ return false;
+
+ if (ht_nss)
+ *fixed_nss = ht_nss;
+ else if (vht_nss)
+ *fixed_nss = vht_nss;
+ else
+ return false;
+
+ return true;
+}
+
+static bool
+ath10k_bitrate_mask_correct(const struct cfg80211_bitrate_mask *mask,
+ enum ieee80211_band band,
+ enum wmi_rate_preamble *preamble)
+{
+ int legacy = 0, ht = 0, vht = 0, i;
+
+ *preamble = WMI_RATE_PREAMBLE_OFDM;
+
+ /* check legacy */
+ legacy = ath10k_check_single_mask(mask->control[band].legacy);
+ if (legacy > 1)
+ return false;
+
+ /* check HT */
+ for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
+ ht += ath10k_check_single_mask(mask->control[band].ht_mcs[i]);
+ if (ht > 1)
+ return false;
+
+ /* check VHT */
+ for (i = 0; i < NL80211_VHT_NSS_MAX; i++)
+ vht += ath10k_check_single_mask(mask->control[band].vht_mcs[i]);
+ if (vht > 1)
+ return false;
+
+ /* Currently we support only one fixed_rate */
+ if ((legacy + ht + vht) != 1)
+ return false;
+
+ if (ht)
+ *preamble = WMI_RATE_PREAMBLE_HT;
+ else if (vht)
+ *preamble = WMI_RATE_PREAMBLE_VHT;
+
+ return true;
+}
+
+static bool
+ath10k_bitrate_mask_rate(const struct cfg80211_bitrate_mask *mask,
+ enum ieee80211_band band,
+ u8 *fixed_rate,
+ u8 *fixed_nss)
+{
+ u8 rate = 0, pream = 0, nss = 0, i;
+ enum wmi_rate_preamble preamble;
+
+ /* Check if single rate correct */
+ if (!ath10k_bitrate_mask_correct(mask, band, &preamble))
+ return false;
+
+ pream = preamble;
+
+ switch (preamble) {
+ case WMI_RATE_PREAMBLE_CCK:
+ case WMI_RATE_PREAMBLE_OFDM:
+ i = ffs(mask->control[band].legacy) - 1;
+
+ if (band == IEEE80211_BAND_2GHZ && i < 4)
+ pream = WMI_RATE_PREAMBLE_CCK;
+
+ if (band == IEEE80211_BAND_5GHZ)
+ i += 4;
+
+ WARN_ON(i >= ARRAY_SIZE(cck_ofdm_rate));
+ rate = cck_ofdm_rate[i];
+ break;
+ case WMI_RATE_PREAMBLE_HT:
+ for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
+ if (mask->control[band].ht_mcs[i])
+ break;
+
+ rate = ffs(mask->control[band].ht_mcs[i]) - 1;
+ nss = i;
+ break;
+ case WMI_RATE_PREAMBLE_VHT:
+ for (i = 0; i < NL80211_VHT_NSS_MAX; i++)
+ if (mask->control[band].vht_mcs[i])
+ break;
+
+ rate = ffs(mask->control[band].vht_mcs[i]) - 1;
+ nss = i;
+ break;
+ }
+
+ *fixed_nss = nss + 1;
+ nss <<= 4;
+ pream <<= 6;
+
+ ath10k_dbg(ATH10K_DBG_MAC, "mac fixed rate pream 0x%02x nss 0x%02x rate 0x%02x\n",
+ pream, nss, rate);
+
+ *fixed_rate = pream | nss | rate;
+
+ return true;
+}
+
+static bool ath10k_get_fixed_rate_nss(const struct cfg80211_bitrate_mask *mask,
+ enum ieee80211_band band,
+ u8 *fixed_rate,
+ u8 *fixed_nss)
+{
+ /* First check full NSS mask, if we can simply limit NSS */
+ if (ath10k_bitrate_mask_nss(mask, band, fixed_nss))
+ return true;
+
+ /* Next Check single rate is set */
+ return ath10k_bitrate_mask_rate(mask, band, fixed_rate, fixed_nss);
+}
+
+static int ath10k_set_fixed_rate_param(struct ath10k_vif *arvif,
+ u8 fixed_rate,
+ u8 fixed_nss)
+{
+ struct ath10k *ar = arvif->ar;
+ u32 vdev_param;
+ int ret = 0;
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (arvif->fixed_rate == fixed_rate &&
+ arvif->fixed_nss == fixed_nss)
+ goto exit;
+
+ if (fixed_rate == WMI_FIXED_RATE_NONE)
+ ath10k_dbg(ATH10K_DBG_MAC, "mac disable fixed bitrate mask\n");
+
+ vdev_param = ar->wmi.vdev_param->fixed_rate;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+ vdev_param, fixed_rate);
+ if (ret) {
+ ath10k_warn("Could not set fixed_rate param 0x%02x: %d\n",
+ fixed_rate, ret);
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ arvif->fixed_rate = fixed_rate;
+
+ vdev_param = ar->wmi.vdev_param->nss;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+ vdev_param, fixed_nss);
+
+ if (ret) {
+ ath10k_warn("Could not set fixed_nss param %d: %d\n",
+ fixed_nss, ret);
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ arvif->fixed_nss = fixed_nss;
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static int ath10k_set_bitrate_mask(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ const struct cfg80211_bitrate_mask *mask)
+{
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct ath10k *ar = arvif->ar;
+ enum ieee80211_band band = ar->hw->conf.chandef.chan->band;
+ u8 fixed_rate = WMI_FIXED_RATE_NONE;
+ u8 fixed_nss = ar->num_rf_chains;
+
+ if (!ath10k_default_bitrate_mask(ar, band, mask)) {
+ if (!ath10k_get_fixed_rate_nss(mask, band,
+ &fixed_rate,
+ &fixed_nss))
+ return -EINVAL;
+ }
+
+ return ath10k_set_fixed_rate_param(arvif, fixed_rate, fixed_nss);
+}
+
static const struct ieee80211_ops ath10k_ops = {
.tx = ath10k_tx,
.start = ath10k_start,
@@ -3332,6 +3625,7 @@ static const struct ieee80211_ops ath10k_ops = {
.tx_last_beacon = ath10k_tx_last_beacon,
.restart_complete = ath10k_restart_complete,
.get_survey = ath10k_get_survey,
+ .set_bitrate_mask = ath10k_set_bitrate_mask,
#ifdef CONFIG_PM
.suspend = ath10k_suspend,
.resume = ath10k_resume,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 0087d69..af36009 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -3003,6 +3003,18 @@ struct wmi_vdev_install_key_arg {
const void *key_data;
};
+/*
+ * vdev fixed rate format:
+ * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
+ * - nss - b5:b4 - ss number (0 mean 1ss)
+ * - rate_mcs - b3:b0 - as below
+ * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
+ * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
+ * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
+ * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
+ * HT/VHT: MCS index
+ */
+
/* Preamble types to be used with VDEV fixed rate configuration */
enum wmi_rate_preamble {
WMI_RATE_PREAMBLE_OFDM,
--
1.7.9.5
More information about the ath10k
mailing list