[wireless-regdb] Correction of wireless-regdb for GB
Ed W
lists at wildgooses.com
Mon Apr 25 06:17:57 PDT 2022
On 20/11/2020 17:54, Seth Forshee wrote:
>> Signed-off-by: Ed Wildgoose <lists at wildgooses.com>
>> ---
>> db.txt | 7 +++++--
>> 1 file changed, 5 insertions(+), 2 deletions(-)
>>
>> diff --git a/db.txt b/db.txt
>> index ac32483..cc5ffd0 100644
>> --- a/db.txt
>> +++ b/db.txt
>> @@ -588,13 +588,16 @@ country FR: DFS-ETSI
>> # GB: https://www.ofcom.org.uk/__data/assets/pdf_file/0019/136009/Ofcom-Information-Sheet-5-GHz-RLANs.pdf
>> # GB: https://www.ofcom.org.uk/__data/assets/pdf_file/0028/84970/ir-2030.pdf
>> # GB: https://www.ofcom.org.uk/__data/assets/pdf_file/0013/126121/Statement_Implementing-Ofcoms-decision-on-the-57-71GHz-band.pdf
>> +# GB: https://www.ofcom.org.uk/__data/assets/pdf_file/0036/198927/6ghz-statement.pdf
>> country GB: DFS-ETSI
>> (2400 - 2483.5 @ 40), (100 mW)
>> (5150 - 5250 @ 80), (200 mW), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI
>> (5250 - 5350 @ 80), (100 mW), NO-OUTDOOR, DFS, AUTO-BW, wmmrule=ETSI
>> - (5470 - 5725 @ 160), (500 mW), DFS, wmmrule=ETSI
>> + (5470 - 5730 @ 160), (500 mW), DFS, wmmrule=ETSI
> This looks okay to me.
>
>> # short range devices (ETSI EN 300 440-1)
>> - (5725 - 5875 @ 80), (25 mW)
>> + # See UK specific notes in ir-2030.pdf, p47
>> + (5725 - 5850 @ 80), (200 mW), AUTO-BW, wmmrule=ETSI
> To echo what I said above, I'm unclear whether this change is in effect
> yet, and based what I've seen so far I think it would need to include
> NO-OUTDOOR.
>
>> + (5925 - 6425 @ 160), (250 mW), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI
> I'm also unclear on whether this change is in effect yet.
>
> Thanks,
> Seth
>
>> # 60 GHz band channels 1-6
>> (57000 - 71000 @ 2160), (40)
>>
>> --
>> 2.26.2
>>
Hi all, I dropped off watching this for a while....
Seems like the update to IR2030 (GB country code regulations) was re-published last year, and the
relevant sections are in pages 32 + 34-36
My reading of this is:
- Other stuff we changed 2 years ago seems ok, caveat I'm unclear when we need to state half power
vs using mean EIRP?
- The 5.9-6.4Ghz range is now good for use (page 35 near the bottom), perhaps add something like:
+ (5925 - 6425 @ 160), (250 mW), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI
- The 60Ghz range seems to available now, but I'm not sure what power number we should have in our
db.txt, see page 32.
Says "40 dBm e.i.r.p / 27 dBm maximum transmit output power"
- There are also some geographic restrictions, not sure what we can do about those?
So something like this perhaps?:
> + (5700 - 71000 @ 160), (40)
Happy to knock this up into a patch if you can help with a little guidance (although it might be
faster for you to just commit the 2 extra lines if you agree?)
Thanks
Ed W
More information about the wireless-regdb
mailing list