[wireless-regdb] [PATCH v2] wireless-regdb: Update regulatory rules for South Korea (KR)
Sungbo Eo
mans0n at gorani.run
Fri Oct 29 09:12:08 PDT 2021
On 2021-10-28 03:06, Seth Forshee wrote:
> On Sun, Oct 24, 2021 at 08:38:21PM +0900, Sungbo Eo wrote:
>> This patch is based on MSIT Public Notification 2020-113 ("Unlicensed Radio
>> Equipment Established Without Notice"), officially announced on 2021-01-06.
>>
>> The PSD must not exceed 2.5 mW/MHz if the frequency range includes all or
>> part of 5230-5250 MHz and the bandwidth is equal to or less than 40 MHz.
>> This leads to the following:
>> * 5230-5250 @ 20 -> 17 dBm
>> * 5210-5250 @ 40 -> 20 dBm
>> Here the power limits for 80/160 MHz bandwidth are also lowered to 17 dBm,
>> as it's not possible to set different power limits for different bandwidths
>> at the moment.
>>
>> Extend the last 5 GHz frequency range to 5850 MHz.
>>
>> WiFi 6E is now allowed with the following restrictions:
>> * Indoor: the full 1.2 GHz range, up to 160 MHz bandwidth and 250mW EIRP
>> * Outdoor: the lower 500 MHz range, up to 160 MHz bandwidth and 25mW EIRP
>> Here only the former entry is added.
>>
>> And also update the regulatory source links.
>>
>> Signed-off-by: Sungbo Eo <mans0n at gorani.run>
>> ---
>> v2:
>> * split 5150-5250 MHz band rule to accommodate the PSD limit
>> * remove AUTO-BW flag from 6 GHz band rule
>> ---
>> db.txt | 17 ++++++++++++-----
>> 1 file changed, 12 insertions(+), 5 deletions(-)
>>
>> diff --git a/db.txt b/db.txt
>> index 6e8dbef..387ac93 100644
>> --- a/db.txt
>> +++ b/db.txt
>> @@ -862,15 +862,22 @@ country KP: DFS-JP
>> (5490 - 5630 @ 20), (30), DFS
>> (5735 - 5815 @ 20), (30)
>>
>> +# Source:
>> +# https://www.law.go.kr/LSW//admRulLsInfoP.do?chrClsCd=&admRulSeq=2100000196972
>> +# https://www.law.go.kr/LSW//admRulLsInfoP.do?chrClsCd=&admRulSeq=2100000196973
>> +# https://www.law.go.kr/LSW//admRulLsInfoP.do?chrClsCd=&admRulSeq=2100000196974
>> country KR: DFS-JP
>> - # ref: https://www.rra.go.kr
>> (2400 - 2483.5 @ 40), (23)
>> - (5150 - 5250 @ 80), (23), AUTO-BW
>> + (5150 - 5210 @ 40), (23), AUTO-BW
>> + # max. PSD 2.5 mW/MHz in 5230-5250 MHz frequency range
>> + (5210 - 5230 @ 20), (20), AUTO-BW
>> + (5230 - 5250 @ 20), (17), AUTO-BW
>
> Even with 5210-5230 split out like this, 5210-5250 @ 40 still gets
> limited to 17 dBm by the 5230-5250 rule. So why do we need to split out
> 5210-5230 separate from 5150-5210?
I did some tests with regdb and I found out that the rule to be applied
depends on the main 20 MHz channel. With the rules above, if I select
channel 48 (5230-5250) and enable VHT40, then the TX power is set to 17
dBm. OTOH if I select channel 44 (5210–5230) and enable VHT40, then the
TX power is set to 20 dBm. I'm not sure whether my result is really
correct, though.
Regards,
Sungbo
>
> Thanks,
> Seth
>
>> (5250 - 5350 @ 80), (20), DFS, AUTO-BW
>> (5470 - 5725 @ 160), (20), DFS
>> - (5725 - 5835 @ 80), (23)
>> - # 60 GHz band channels 1-4,
>> - # ref: http://www.law.go.kr/%ED%96%89%EC%A0%95%EA%B7%9C%EC%B9%99/%EB%AC%B4%EC%84%A0%EC%84%A4%EB%B9%84%EA%B7%9C%EC%B9%99
>> + (5725 - 5850 @ 80), (23)
>> + # 6 GHz band
>> + (5925 - 7125 @ 160), (24), NO-OUTDOOR
>> + # 60 GHz band channels 1-4
>> (57000 - 66000 @ 2160), (43)
>>
>> country KW: DFS-ETSI
>> --
>> 2.33.1
>>
More information about the wireless-regdb
mailing list