[wireless-regdb] [PATCH v2] wireless-regdb: Update regulatory rules for South Korea
seth.forshee at canonical.com
Wed May 15 09:21:42 PDT 2019
You dropped Peter and the linux-wireless list from your reply, adding
On Thu, May 16, 2019 at 12:10:16AM +0900, suchan wrote:
> 2019-05-15 10:03PM at Seth Forshee wrote:
> > Is there any mention of transmit power control in the document? The fact
> > that some of the old limits are exactly half of they values you've given
> > makes me wonder if they weren't set lower for TPC, especially for
> > 5250-5350 MHz where TPC is common.
> > Since you're changing these rules, I'd also like to see the frequency
> > ranges changed to match the documented ranges, i.e.:
> > 2400 - 2483.5
> > 5150 - 5250
> > 5250 - 5350
> > 5470 - 5710
> > 5735 - 5850
> > I left the gap in the 5470-5850 MHz range since I can't tell exactly
> > where the DFS requirement ends. Usually it seems to be 5725 MHz, but
> > that is not universal. If you can determine where the break is those
> > ranges could also be expanded.
> > Thanks,
> > Seth
> > _______________________________________________
> > wireless-regdb mailing list
> > wireless-regdb at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/wireless-regdb
> from same document, just under the table for wifi range itself 5250∼5350
> MHz and 5470∼5725 MHz need TPC and DFS
> TPC rule is if power exceeds 25mW/MHz (this includes antenna gain), it
> has do be able to reduce it under 12.5mW/Mhz.
> DFS rule itself (DFS-JP) looks right.
Thanks! Based on that I think this is probably what we need:
(2400 - 2483.5 @ 40), (23)
(5150 - 5250 @ 80), (23), AUTO-BW
(5250 - 5350 @ 80), (20), DFS, AUTO-BW
(5470 - 5725 @ 160), (20), DFS
(5725 - 5835 @ 80), (23)
Peter, if that looks good to you please send a v3 patch.
More information about the wireless-regdb