[wireless-regdb] [PATCH v2 4/8] cfg80211: reg: Properly handle rules for 5 and 10 MHz channels

[Johannes Berg]

On Mon, 2015-11-23 at 19:27 +0100, Michal Sojka wrote:
> Regulatory rules are applied to channels as if the channel is at
> least
> 20 MHz wide. This is a problem when dealing with 5 and 10 MHz
> channels
> because side channels of a regulatory rule get disabled even when
> they
> fall into rule's frequency range.
> 
> This problem was already fixed in commit
> 4edd56981c8fbb349b1529a2feaf772636eb1c83, but only for custom
> regulatory
> domains provided by drivers. Here we fix it also for all other (e.g.
> user-supplied) regulatory domains.
> 
> Before that, similar commit was
> reverted (e33e2241e272eddc38339692500bd1c7d8753a77) due to it
> allowing
> running AP on channel 12 in the US regulatory domain. I have checked
> that this is not possible with this change:
> 
>   # iw reg set US
>   # iw dev wlan0 interface add wlan0_ap  type __ap
>   # iw dev wlan0_ap set channel 12
>   command failed: Invalid argument (-22)
> 
Applied, with some fixups to the commit message :)

johannes