[PATCH v2 3/3] wifi: wcn36xx: add support for WCN3610

[Konrad Dybcio]

On 3/5/26 1:32 AM, Kerigan Creighton wrote:
> The WCN3610 has a lot in common with the WCN3620, so much
> of that code was reused.
> 
> Tested on an Anki Vector 1.0 and 2.0 robot. Support for other
> WCN36xx chips has not been affected.
> 
> The WCN3610 requires specific BTC configuration values for
> stable Wi-Fi. Without these values, there's some packet loss.
> An extra CFG table was made so other chips are not affected.
> 
> STA_POWERSAVE causes firmware bugs (long hangs) with the
> WCN3610, thus it has been disabled just for this chip.

Is that something you've observed, or does the downstream kernel
mention these issues?

Konrad