[PATCH 2/2] wcn36xx: add missing 5GHz channels 136 and 144

[Benjamin Li]

These channels missing from scan results are a regression from downstream
prima.

Signed-off-by: Benjamin Li <benl at squareup.com>
---
 drivers/net/wireless/ath/wcn36xx/main.c | 2 ++
 drivers/net/wireless/ath/wcn36xx/smd.c  | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 263af65a889a..13d09c66ae92 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -85,7 +85,9 @@ static struct ieee80211_channel wcn_5ghz_channels[] = {
 	CHAN5G(5620, 124, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH),
 	CHAN5G(5640, 128, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH),
 	CHAN5G(5660, 132, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW),
+	CHAN5G(5680, 136, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW),
 	CHAN5G(5700, 140, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH),
+	CHAN5G(5720, 144, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH),
 	CHAN5G(5745, 149, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW),
 	CHAN5G(5765, 153, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW),
 	CHAN5G(5785, 157, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH),
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index be6442b3c80b..9785327593d2 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -2396,6 +2396,7 @@ int wcn36xx_smd_feature_caps_exchange(struct wcn36xx *wcn)
 	set_feat_caps(msg_body.feat_caps, STA_POWERSAVE);
 	if (wcn->rf_id == RF_IRIS_WCN3680) {
 		set_feat_caps(msg_body.feat_caps, DOT11AC);
+		set_feat_caps(msg_body.feat_caps, WLAN_CH144);
 		set_feat_caps(msg_body.feat_caps, ANTENNA_DIVERSITY_SELECTION);
 	}
 
-- 
2.25.1