[PATCH 5/5] arm64: dts: qcom: msm8916: Enable modem and WiFi

[Bjorn Andersson]

Enable the modem and WiFi subsystems and specify msm8916 specific
firmware path for these and the WCNSS control service.

Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++++++++
 arch/arm64/boot/dts/qcom/msm8916.dtsi     |  2 +-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 6aef0c2e4f0a..448e3561ef63 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -305,6 +305,12 @@ &mdss {
 	status = "okay";
 };
 
+&mpss {
+	status = "okay";
+
+	firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn";
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -312,6 +318,8 @@ &pm8916_resin {
 
 &pronto {
 	status = "okay";
+
+	firmware-name = "qcom/msm8916/wcnss.mbn";
 };
 
 &sdhc_1 {
@@ -394,6 +402,10 @@ &wcd_codec {
 	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
 };
 
+&wcnss_ctrl {
+	firmware-name = "qcom/msm8916/WCNSS_qcom_wlan_nv.bin";
+};
+
 /* Enable CoreSight */
 &cti0 { status = "okay"; };
 &cti1 { status = "okay"; };
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5353da521974..1118836c15dd 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1738,7 +1738,7 @@ smd-edge {
 
 				label = "pronto";
 
-				wcnss {
+				wcnss_ctrl: wcnss {
 					compatible = "qcom,wcnss";
 					qcom,smd-channels = "WCNSS_CTRL";
 
-- 
2.29.2