[PATCH v2 01/12] wcn36xx: Add VHT fields to parameter data structures

[Bryan O'Donoghue]

In order to pass VHT parameters to wcn3680 we need to use a super-set of
the V1 data-structures with additional VHT parameters tacked on.

This patch adds the additional fields to the STA and BSS parameter
structures with some utility macros to make calculation of the structure
size easier.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>
---
 drivers/net/wireless/ath/wcn36xx/hal.h | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index 573799274a02..3cceeaf0136f 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -1592,9 +1592,15 @@ struct wcn36xx_hal_config_sta_params_v1 {
 	u8 reserved:4;
 
 	/* These rates are the intersection of peer and self capabilities. */
-	struct wcn36xx_hal_supported_rates supported_rates;
+	struct wcn36xx_hal_supported_rates_v1 supported_rates;
+
+	u8 vht_capable;
+	u8 vht_tx_channel_width_set;
+
 } __packed;
 
+#define WCN36XX_DIFF_STA_PARAMS_V1_NOVHT 10
+
 struct wcn36xx_hal_config_sta_req_msg_v1 {
 	struct wcn36xx_hal_msg_header header;
 	struct wcn36xx_hal_config_sta_params_v1 sta_params;
@@ -2015,8 +2021,14 @@ struct wcn36xx_hal_config_bss_params_v1 {
 	 *  "STA context"
 	 */
 	struct wcn36xx_hal_config_sta_params_v1 sta;
+
+	u8 vht_capable;
+	u8 vht_tx_channel_width_set;
+
 } __packed;
 
+#define WCN36XX_DIFF_BSS_PARAMS_V1_NOVHT (WCN36XX_DIFF_STA_PARAMS_V1_NOVHT + 2)
+
 struct wcn36xx_hal_config_bss_req_msg_v1 {
 	struct wcn36xx_hal_msg_header header;
 	struct wcn36xx_hal_config_bss_params_v1 bss_params;
-- 
2.27.0