[PATCH v2] wcn36xx: Disable 5GHz for wcn3610

Ramon Fried rfried at codeaurora.org
Thu Mar 29 00:32:55 PDT 2018


(adding Bjorn Andersson)


On 3/29/2018 10:15 AM, Kalle Valo wrote:
> (adding devicetree list)
>
> Ramon Fried <rfried at codeaurora.org> writes:
>
>> wcn3610 can only operate on 2.4GHz band due to RF limitation.
>> If wcn36xx digital block is associated with an external IRIS
>> RF module, retrieve the id and disable 5GHz band in case of
>> wcn3610 id.
>>
>> Signed-off-by: Ramon Fried <rfried at codeaurora.org>
>> ---
>> v2: fixed wrong assignment, which is logically introduces the 
>> 	same behaviour, but for correctness.
>>
>>  drivers/net/wireless/ath/wcn36xx/main.c    | 4 +++-
>>  drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 +
>>  2 files changed, 4 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
>> index ab5be6d2c691..833531a68c95 100644
>> --- a/drivers/net/wireless/ath/wcn36xx/main.c
>> +++ b/drivers/net/wireless/ath/wcn36xx/main.c
>> @@ -1146,7 +1146,7 @@ static int wcn36xx_init_ieee80211(struct wcn36xx *wcn)
>>  		BIT(NL80211_IFTYPE_MESH_POINT);
>>  
>>  	wcn->hw->wiphy->bands[NL80211_BAND_2GHZ] = &wcn_band_2ghz;
>> -	if (wcn->rf_id != RF_IRIS_WCN3620)
>> +	if (wcn->rf_id != RF_IRIS_WCN3610 && wcn->rf_id != RF_IRIS_WCN3620)
>>  		wcn->hw->wiphy->bands[NL80211_BAND_5GHZ] = &wcn_band_5ghz;
>>  
>>  	wcn->hw->wiphy->max_scan_ssids = WCN36XX_MAX_SCAN_SSIDS;
>> @@ -1248,6 +1248,8 @@ static int wcn36xx_platform_get_resources(struct wcn36xx *wcn,
>>  	if (iris_node) {
>>  		if (of_device_is_compatible(iris_node, "qcom,wcn3620"))
>>  			wcn->rf_id = RF_IRIS_WCN3620;
>> +		else if (of_device_is_compatible(iris_node, "qcom,wcn3610"))
>> +			wcn->rf_id = RF_IRIS_WCN3610;
>>  		of_node_put(iris_node);
>>  	}
> Should we document qcom,wcn3610 just like wcn3620 is:
>
> Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt:                    "qcom,wcn3620",
IMHO the mentioned bindings is related to the PIL (peripheral image loaded) which is just the firmware part and has
nothing to do with wifi frontend(IRIS).




More information about the wcn36xx mailing list