BD and HT Aggregation

Eugene Krasnikov k.eugene.e at gmail.com
Wed Oct 16 18:51:19 EDT 2013


All you need to do is to print buffer that is passed to function
WCTS_SendMessage. This will show you raw HAL messages. The first
message u gonna get is download_nv.

On Wed, Oct 16, 2013 at 11:45 PM, Jason Mobarak <jam at cozybit.com> wrote:
> On Wed, Oct 16, 2013 at 11:53 AM, Eugene Krasnikov <k.eugene.e at gmail.com> wrote:
>> The only method i know is to dump HAL path on prima and compare it to
>> wcn36xx. Good luck!
>
> Hi Eugene,
>
> Can you provide some pointers on how to dump the HAL path?
>
> Thanks,
> -jmob
>
>> On Wed, Oct 16, 2013 at 7:52 PM, Eugene Krasnikov <k.eugene.e at gmail.com> wrote:
>>> my assumption for bullet number 2 is that bss index is wrong, but that
>>> is just a speculation:) Let me know if you find something.
>>>
>>> On Wed, Oct 16, 2013 at 7:44 PM, Eugene Krasnikov <k.eugene.e at gmail.com> wrote:
>>>> I would suggest to concentrate on bullet 2 first. Second bullet is
>>>> much easier to fix!
>>>>
>>>> On Wed, Oct 16, 2013 at 7:41 PM, Chun-Yeow Yeoh
>>>> <yeohchunyeow at cozybit.com> wrote:
>>>>>> 1) When you say "The only different, I saw from prima"  you mean you
>>>>>> saw in source code? Try to run prima driver and dump BD and then
>>>>>> compare wcn36xx and prima logs.
>>>>> Yes, referring source code. Ok I try this first.
>>>>>
>>>>> ----
>>>>> Chun-Yeow
>>>>>
>>>>> On Wed, Oct 16, 2013 at 11:38 AM, Eugene Krasnikov <k.eugene.e at gmail.com> wrote:
>>>>>> 1) When you say "The only different, I saw from prima"  you mean you
>>>>>> saw in source code? Try to run prima driver and dump BD and then
>>>>>> compare wcn36xx and prima logs.
>>>>>> 2) If STA mode fails then there is a regression! I would suggest first
>>>>>> to fix this problem and then come back to bullet number 1.
>>>>>>
>>>>>> On Wed, Oct 16, 2013 at 7:28 PM, Chun-Yeow Yeoh
>>>>>> <yeohchunyeow at cozybit.com> wrote:
>>>>>>>> 1) Try it first;) i am confident that TX agg should work with prim
>>>>>>> The only different, I saw from prima is that the writing of DXE
>>>>>>> register, like marking the EOP and INT. But EOP is representing end of
>>>>>>> packet (a MPDU frame), right?
>>>>>>>
>>>>>>>> 2) Hmm.. is it failing in STA mode as well? if yes then it's regression.
>>>>>>> Yes, STA mode also failed.
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Best regards,
>>>>>> Eugene
>>>>
>>>>
>>>>
>>>> --
>>>> Best regards,
>>>> Eugene
>>>
>>>
>>>
>>> --
>>> Best regards,
>>> Eugene
>>
>>
>>
>> --
>> Best regards,
>> Eugene
>>
>> _______________________________________________
>> wcn36xx mailing list
>> wcn36xx at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/wcn36xx



-- 
Best regards,
Eugene



More information about the wcn36xx mailing list