BD and HT Aggregation

[Eugene Krasnikov]

1) Try it first;) i am confident that TX agg should work with prima.
2) Hmm.. is it failing in STA mode as well? if yes then it's regression.

On Wed, Oct 16, 2013 at 7:21 PM, Chun-Yeow Yeoh
<yeohchunyeow at cozybit.com> wrote:
> 1) Tx aggr - haven't tried out. If let say prima failed, is that
> meaning Tx aggregation is not supported?
>
> 2) Both failed, Tx and Rx. But addba and addba session are both alright.
>
> On Wed, Oct 16, 2013 at 11:17 AM, Eugene Krasnikov <k.eugene.e at gmail.com> wrote:
>> 1) Do you see tx agg is working with prima?
>> 2) Did trigger ba fail for rx or tx?
>>
>> On Wed, Oct 16, 2013 at 7:07 PM, Chun-Yeow Yeoh
>> <yeohchunyeow at cozybit.com> wrote:
>>> I haven't found any flag on Tx site related to AMPDU in prima. But I
>>> do see that there is a flag indicating the received frame is AMPDU,
>>> and also last AMPDU.
>>>
>>> By the way, the hal command trigger ba is failed but Rx HT aggregation
>>> is working. Is this HAL command really necessary?
>>>
>>> ----
>>> Chun-Yeow
>>>
>>> On Wed, Oct 16, 2013 at 10:45 AM, Eugene Krasnikov <k.eugene.e at gmail.com> wrote:
>>>> Do not remember. Did you check prima driver if the flags are set in
>>>> the same way? Do you see that agg is working with prima for you?
>>>>
>>>>
>>>> On Wed, Oct 16, 2013 at 6:05 PM, Chun-Yeow Yeoh
>>>> <yeohchunyeow at cozybit.com> wrote:
>>>>> In terms of aggregation, is there any specific flag to be indicated
>>>>> the AMPDU frame, I have not found any of these in the Prima driver.
>>>>>
>>>>> -----
>>>>> Chun-Yeow
>>>>>
>>>>> On Wed, Oct 16, 2013 at 8:17 AM, Eugene Krasnikov <k.eugene.e at gmail.com> wrote:
>>>>>> As discussed in IRC each frame should have it's own BD.
>>>>>>
>>>>>> On Thu, Oct 10, 2013 at 1:38 AM, Chun-Yeow Yeoh
>>>>>> <yeohchunyeow at cozybit.com> wrote:
>>>>>>> Hi, all
>>>>>>>
>>>>>>> I am currently working on HT aggregation on Tx path.
>>>>>>>
>>>>>>> Can anyone here explains the relationship between the Buffer
>>>>>>> Descriptor (BD) for transmission.
>>>>>>>
>>>>>>> All the frames should have their associated BDs setup prior to the
>>>>>>> transmission in aggregation. Or we can have one BD, but for multiple
>>>>>>> frames by increasing the bd->pdu.mpdu_len.
>>>>>>>
>>>>>>> Thanks
>>>>>>>
>>>>>>> ----
>>>>>>> Chun-Yeow
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> wcn36xx mailing list
>>>>>>> wcn36xx at lists.infradead.org
>>>>>>> http://lists.infradead.org/mailman/listinfo/wcn36xx
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Best regards,
>>>>>> Eugene
>>>>
>>>>
>>>>
>>>> --
>>>> Best regards,
>>>> Eugene
>>
>>
>>
>> --
>> Best regards,
>> Eugene



-- 
Best regards,
Eugene