[Pcsclite-muscle] Dual Interface Reader

[Ludovic Rousseau]

Le 29/01/2018 à 16:03, Dennis Rieks a écrit :
> Hello,

Hello,

> we are trying to access a smartcard using a dual interface reader 
> (Identiv uTrust 4501 F Dual Interface Reader). If the card is inserted 
> only partly, the contactless interface will detect the card fine. But 
> when the card is fully inserted into the reader, the contactless reader 
> will emit a card removed event and the contact reader a card inserted 
> event.
> 
> Card inserted partly:
> eventhandler.c:421:EHStatusHandlerThread() Card inserted into Identiv 
> uTrust 4701 F Dual Interface Reader [uTrust 4501 F CL Reader]
> 
> Card inserted fully:
> eventhandler.c:421:EHStatusHandlerThread() Card inserted into Identiv 
> uTrust 4701 F Dual Interface Reader [uTrust 4501 F Contact Reader]
> eventhandler.c:356:EHStatusHandlerThread() Card Removed From Identiv 
> uTrust 4701 F Dual Interface Reader [uTrust 4501 F CL Reader]
> 
> The problem is that if the card is not inserted slowly, the contactless 
> reader has no change to read the nfc card.
> 
> (Because we are currently using nfc cards only, the contact reader will 
> fail to power the chip: "winscard.c:339:SCardConnect() Error powering up 
> card", I think this is because no contact chip is present.)
> 
> Is there any way to access the nfc chip when the card is fully inserted?

Maybe you can just put the card _on_ the reader instead of _inside_ the 
reader.

Bye

-- 
Dr. Ludovic Rousseau