[Pcsclite-muscle] Gemalto (was Gemplus) GemPC Key SmartCard Reader not working in debian stretch

[Ludovic Rousseau]

2017-05-22 10:16 GMT+02:00 Wolfgang Pichler <wpichler at callino.at>:

> Hi,
>

Hello,


> i did had the same bug - it seems that some Gemalto Sticks (not all) have
> a problem in the firmware intitalize procedure. Because of this problem you
> get a too big usb read bytes request - which will then fail?
>

Very interesting.

Can you send me the output of the GNU/Linux command "lsusb -v" for your
bogus device?
And also the lines logged by the Linux kernel when you connect the device.

Same question with a non-bogus device if you have one.

How have you found the work around?
Have you used a USB hardware spy or something similar?

I am surprised to see that changing the _reception_ buffer length has an
effect. The USB device should not know this buffer size. But I am not a USB
expert.


> Attached a workaround for this problem - which does work for me.
>
> But as stated - this is a workaround - not a real bug fix.
>

The workaround has a bad size effect that reader responses of more than
4096 bytes would have problems.
Before I apply any workaround I need to understand why your change makes
the reader work.

Bye

-- 
 Dr. Ludovic Rousseau
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/pcsclite-muscle/attachments/20170522/76bbcfa5/attachment.html>