[Pcsclite-muscle] SCardConnect() returns unresponsive card

[Ludovic Rousseau]

2017-05-18 13:29 GMT+02:00 G?k?enur CANLI <gokcenur.canli at udea.com.tr>:

> Sorry for wrong one, generated updated log is attached.
>

00000002 ifdhandler.c:1081:IFDHSetProtocolParameters() Negotiate IFSD at 254
00000003 sending: 00 C1 01 FE 3E
00000003 -> 000000 6F 05 00 00 00 00 0D 00 00 00 00 C1 01 FE 3E
00000966 <- 000000 80 04 00 00 00 00 0D 00 00 00 92 82 00 10
00000005 received: 92 82 00 10
00000002 sending: 00 C1 01 FE 3E
00000003 -> 000000 6F 05 00 00 00 00 0E 00 00 00 00 C1 01 FE 3E
00000769 <- 000000 80 04 00 00 00 00 0E 00 00 00 92 82 00 10
00000005 received: 92 82 00 10
00000002 sending: 00 C1 01 FE 3E
00000003 -> 000000 6F 05 00 00 00 00 0F 00 00 00 00 C1 01 FE 3E
00000767 <- 000000 80 04 00 00 00 00 0F 00 00 00 92 82 00 10
00000005 received: 92 82 00 10
00000002 prothandler.c:124:PHSetProtocol() PTS failed (612), using T=1

The reader fails to negociate the IFSD (Information Field Size for CCID for
protocol T = 1)

The value returned by the reader "92 82 00 10" is very strange (bogus?).
The CCID driver tries 3 times the same command and then gives up.

As Francois Grieu wrote in another email (thanks for that) this card can
use a very fast communication.
Your reader [1] defines:
dwDefaultClock: 4.800 MHz [3]
and
dwMaxDataRate: 826000 bps [4]

So the card could communicate at 300 kbits/s.

Your card is not yet in my list. Could you add it using [2]? Or tell us
what this smart card is?


Francois proposed different solutions to solve the problem.
There is no easy way to force a TA1 in the driver. Maybe the simplest fix
would be to change the value of dwMaxDataRate for this reader and use a
(much) lower value instead.

Proposed patch:
--- /var/folders/5h/3d1x67_x5g30t36wypgxpmpc0000gn/T//sbZS7a_ccid.c
2017-05-18 14:33:20.000000000 +0200
+++ src/ccid.c  2017-05-18 14:33:18.000000000 +0200
@@ -87,6 +87,10 @@ int ccid_open_hack_pre(unsigned int read
            ccid_descriptor->dwMaxDataRate = 9600;
            break;

+       case MICROCHIP_SEC1100:
+           ccid_descriptor->dwMaxDataRate = 12903;
+           break;
+
        case ElatecTWN4:
            /* use a timeout of 400 ms instead of 100 ms in
CmdGetSlotStatus()
             * used by CreateChannelByNameOrChannel()


12903 is a very low value. This is the lowest/default data rate of the
reader (dwDataRate [5])
You can increase it up to 826000 and see when the reader fails.

Bye

[1] http://pcsclite.alioth.debian.org/ccid/readers/Microchip_SEC1110.txt
[2]
http://smartcard-atr.appspot.com/parse?ATR=3B9F968131FE458065544312210831C073F6218081059A
[3]
https://ludovicrousseau.blogspot.fr/2014/07/ccid-descriptor-statistics.html
[4]
https://ludovicrousseau.blogspot.fr/2014/07/ccid-descriptor-statistics-dwmaxdatarate.html
[5]
https://ludovicrousseau.blogspot.fr/2014/02/ccid-descriptor-statistics-dwdatarate.html

-- 
 Dr. Ludovic Rousseau
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/pcsclite-muscle/attachments/20170518/6c5a9677/attachment.html>