[Pcsclite-muscle] Cyberjack e-com on openSuse 42.2 fails

[wully]

Hi Experts

I am using the Reiner-SCT cyberjack e-com reader since 2008 and it runs 
nicely on my openSuse13.2 since 2014 without problems.
On the test machine, I have installed *debian jessie and the reader 
works perfectely*.
On the parallel installed openSuse 42.2, the same reader is not be 
recognized, as seen in the following output from pcscd.

linux:/etc/udev/rules.d # /usr/sbin/pcscd -d -a -f
00000000 pcscdaemon.c:345:main() pcscd set to foreground with debug send 
to stdout
00000368 configfile.l:285:DBGetReaderListDir() Parsing conf directory: 
/etc/reader.conf.d
00000047 configfile.l:361:DBGetReaderList() Parsing conf file: 
/etc/reader.conf.d/reader.conf
00000053 configfile.l:322:DBGetReaderListDir() Skipping non regular file: ..
00000008 configfile.l:322:DBGetReaderListDir() Skipping non regular file: .
00000012 pcscdaemon.c:658:main() pcsc-lite 1.8.22 daemon ready.
00002336 hotplug_libudev.c:297:get_driver() Looking for a driver for 
VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001
00000119 hotplug_libudev.c:297:get_driver() Looking for a driver for 
VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001
00000120 hotplug_libudev.c:297:get_driver() Looking for a driver for 
VID: 0x2109, PID: 0x2811, path: /dev/bus/usb/001/002
00000132 hotplug_libudev.c:297:get_driver() Looking for a driver for 
VID: 0x0557, PID: 0x8021, path: /dev/bus/usb/001/004
00000129 hotplug_libudev.c:297:get_driver() Looking for a driver for 
VID: 0x046D, PID: 0xC31C, path: /dev/bus/usb/001/005
00000127 hotplug_libudev.c:297:get_driver() Looking for a driver for 
VID: 0x046D, PID: 0xC31C, path: /dev/bus/usb/001/005
00000126 hotplug_libudev.c:297:get_driver() Looking for a driver for 
VID: 0x046D, PID: 0xC31C, path: /dev/bus/usb/001/005
00000120 hotplug_libudev.c:297:get_driver() Looking for a driver for 
VID: 0x0557, PID: 0x8021, path: /dev/bus/usb/001/004
00000113 hotplug_libudev.c:297:get_driver() Looking for a driver for 
VID: 0x2109, PID: 0x2811, path: /dev/bus/usb/001/002
00000105 hotplug_libudev.c:297:get_driver() Looking for a driver for 
VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001
00000122 hotplug_libudev.c:297:get_driver() Looking for a driver for 
VID: 0x0BDA, PID: 0x0129, path: /dev/bus/usb/001/003
00000166 hotplug_libudev.c:297:get_driver() Looking for a driver for 
VID: 0x1D6B, PID: 0x0003, path: /dev/bus/usb/002/001
31945767 hotplug_libudev.c:651:HPEstablishUSBNotifications() USB Device add
00000365 hotplug_libudev.c:297:get_driver() Looking for a driver for 
VID: 0x0C4B, PID: 0x0401, path: /dev/bus/usb/001/008
00000025 hotplug_libudev.c:436:HPAddDevice() Adding USB device: REINER 
SCT cyberJack pp_a2
00000163 readerfactory.c:1074:RFInitializeReader() Attempting startup of 
REINER SCT cyberJack pp_a2 (3865505373) 00 00 using 
/usr/lib64/readers/libifd-cyberjack.bundle/Contents/Linux/libifd-cyberjack.so
CYBERJACK: Started
00003931 readerfactory.c:949:RFBindFunctions() Loading IFD Handler 3.0
00017693 readerfactory.c:1105:RFInitializeReader() Open Port 0x200000 
Failed (usb:0c4b/0401:libudev:0:/dev/bus/usb/001/008)
00000015 readerfactory.c:376:RFAddReader() REINER SCT cyberJack pp_a2 
(3865505373) init failed.
00000015 readerfactory.c:609:RFRemoveReader() UnrefReader() count was: 1
00000009 readerfactory.c:1125:RFUnInitializeReader() Attempting shutdown 
of REINER SCT cyberJack pp_a2 (3865505373) 00 00.
00000017 readerfactory.c:986:RFUnloadReader() Unloading reader driver.
00000069 hotplug_libudev.c:523:HPAddDevice() Failed adding USB device: 
REINER SCT cyberJack pp_a2



According to other users of 42.2, the newer Cyberjack-Readers work 
without problems. I have the source package

pcsc-cyberjack_3.99.5final.SP10.tar

from Reiner and I am capable of building this with ./configure and make 
install. But the result of pcscd is the above.

Can you give me some hints, where I can make provisions in this source 
to understand why the my old Cyberjack does not work?

Any help is much apreciated

Wully


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/pcsclite-muscle/attachments/20170713/fe4a2c74/attachment.html>