[Pcsclite-muscle] Card Reader Issue
Nicholas Twerdochlib
nicholas
Tue May 19 04:23:30 PDT 2015
It appears to me the both devices where found and registeted during boot
up. What does your code look like for connecting to the readers?
When you get into this state does lsusb show the devices?
Can you confirm if the pcsc daemon is running prior to your app running?
Sent with AquaMail for Android
http://www.aqua-mail.com
On May 19, 2015 4:25:25 AM Tom Arnautovic <Tom.Arnautovic at neardesk.com> wrote:
> Hi. I have two ACR122U card readers attached to a Raspberry Pi. This
> has some software which, when presented with a valid card, will activate a
> switch. It works for weeks on end but occasionally the system stops
> working and the readers become unresponsive. It seems, that possibly after
> an unintended reboot, the device Raspberry Pi cannot reconnect with the
> readers. Below is the messages log file. Firstly, does anybody know why
> this happens and how to fix it? If not, is there a workaround to tell the
> OS to keep trying to initialize the USB readers if they fail like this?
>
> May 17 06:25:04 door0036 rsyslogd: [origin software="rsyslogd"
> swVersion="5.8.11" x-pid="1807" x-info="http://www.rsyslog.com"] rsyslogd
> was HUPed
> May 18 06:25:03 door0036 rsyslogd: [origin software="rsyslogd"
> swVersion="5.8.11" x-pid="1807" x-info="http://www.rsyslog.com"] rsyslogd
> was HUPed
> May 18 11:40:49 door0036 pcscd: eventhandler.c:403:EHStatusHandlerThread()
> Error powering up card.
> May 18 13:17:17 door0036 kernel: imklog 5.8.11, log source = /proc/kmsg
> started.
> May 18 13:17:18 door0036 rsyslogd: [origin software="rsyslogd"
> swVersion="5.8.11" x-pid="1787" x-info="http://www.rsyslog.com"] start
> May 18 13:17:18 door0036 kernel: [ 0.000000] Booting Linux on physical
> CPU 0xf00
> May 18 13:17:18 door0036 kernel: [ 0.000000] Initializing cgroup subsys cpu
> May 18 13:17:18 door0036 kernel: [ 0.000000] Initializing cgroup subsys
> cpuacct
> May 18 13:17:18 door0036 kernel: [ 0.000000] Linux version 3.18.12-v7+
> (dc4 at dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG
> linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #783 SMP PREEMPT Tue May 5
> 22:48:52 BST 2015
> May 18 13:17:18 door0036 kernel: [ 0.000000] CPU: ARMv7 Processor
> [410fc075] revision 5 (ARMv7), cr=10c5387d
> May 18 13:17:18 door0036 kernel: [ 0.000000] CPU: PIPT / VIPT
> nonaliasing data cache, VIPT aliasing instruction cache
> May 18 13:17:18 door0036 kernel: [ 0.000000] Machine model: Raspberry Pi
> 2 Model B
> May 18 13:17:18 door0036 kernel: [ 0.000000] cma: Reserved 8 MiB at
> 0x3d800000
> May 18 13:17:18 door0036 kernel: [ 0.000000] Memory policy: Data cache
> writealloc
> May 18 13:17:18 door0036 kernel: [ 0.000000] [bcm2709_smp_init_cpus]
> enter (8620->f3003010)
> May 18 13:17:18 door0036 kernel: [ 0.000000] [bcm2709_smp_init_cpus]
> ncores=4
> May 18 13:17:18 door0036 kernel: [ 0.000000] PERCPU: Embedded 10
> pages/cpu @bd001000 s11456 r8192 d21312 u40960
> May 18 13:17:18 door0036 kernel: [ 0.000000] Built 1 zonelists in Zone
> order, mobility grouping on. Total pages: 251968
> May 18 13:17:18 door0036 kernel: [ 0.000000] Kernel command line:
> dma.dmachans=0x7f35 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480
> bcm2709.boardrev=0xa01041 bcm2709.serial=0x965cf86f
> smsc95xx.macaddr=B8:27:EB:5C:F8:6F bcm2708_fb.fbswap=1
> bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0
> sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3ea00000
> vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200
> kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4
> elevator=deadline rootwait
> May 18 13:17:18 door0036 kernel: [ 0.000000] PID hash table entries:
> 4096 (order: 2, 16384 bytes)
> May 18 13:17:18 door0036 kernel: [ 0.000000] Dentry cache hash table
> entries: 131072 (order: 7, 524288 bytes)
> May 18 13:17:18 door0036 kernel: [ 0.000000] Inode-cache hash table
> entries: 65536 (order: 6, 262144 bytes)
> May 18 13:17:18 door0036 kernel: [ 0.000000] Memory: 989600K/1015808K
> available (5722K kernel code, 397K rwdata, 1748K rodata, 384K init, 763K
> bss, 26208K reserved)
> May 18 13:17:18 door0036 kernel: [ 0.000000] Virtual kernel memory layout:
> May 18 13:17:18 door0036 kernel: [ 0.000000] vector : 0xffff0000 -
> 0xffff1000 ( 4 kB)
> May 18 13:17:18 door0036 kernel: [ 0.000000] fixmap : 0xffc00000 -
> 0xffe00000 (2048 kB)
> May 18 13:17:18 door0036 kernel: [ 0.000000] vmalloc : 0xbe800000 -
> 0xff000000 (1032 MB)
> May 18 13:17:18 door0036 kernel: [ 0.000000] lowmem : 0x80000000 -
> 0xbe000000 ( 992 MB)
> May 18 13:17:18 door0036 kernel: [ 0.000000] modules : 0x7f000000 -
> 0x80000000 ( 16 MB)
> May 18 13:17:18 door0036 kernel: [ 0.000000] .text : 0x80008000 -
> 0x80753a5c (7471 kB)
> May 18 13:17:18 door0036 kernel: [ 0.000000] .init : 0x80754000 -
> 0x807b4000 ( 384 kB)
> May 18 13:17:18 door0036 kernel: [ 0.000000] .data : 0x807b4000 -
> 0x808174bc ( 398 kB)
> May 18 13:17:18 door0036 kernel: [ 0.000000] .bss : 0x808174bc -
> 0x808d6254 ( 764 kB)
> May 18 13:17:18 door0036 kernel: [ 0.000000] SLUB: HWalign=64,
> Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> May 18 13:17:18 door0036 kernel: [ 0.000000] Preemptible hierarchical
> RCU implementation.
> May 18 13:17:18 door0036 kernel: [ 0.000000] NR_IRQS:608
> May 18 13:17:18 door0036 kernel: [ 0.000000] Architected cp15 timer(s)
> running at 19.20MHz (virt).
> May 18 13:17:18 door0036 kernel: [ 0.000014] sched_clock: 56 bits at
> 19MHz, resolution 52ns, wraps every 3579139424256ns
> May 18 13:17:18 door0036 kernel: [ 0.000038] Switching to timer-based
> delay loop, resolution 52ns
> May 18 13:17:18 door0036 kernel: [ 0.000337] Console: colour dummy
> device 80x30
> May 18 13:17:18 door0036 kernel: [ 0.001817] console [tty1] enabled
> May 18 13:17:18 door0036 kernel: [ 0.001868] Calibrating delay loop
> (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
> May 18 13:17:18 door0036 kernel: [ 0.001949] pid_max: default: 32768
> minimum: 301
> May 18 13:17:18 door0036 kernel: [ 0.002357] Mount-cache hash table
> entries: 2048 (order: 1, 8192 bytes)
> May 18 13:17:18 door0036 kernel: [ 0.002417] Mountpoint-cache hash table
> entries: 2048 (order: 1, 8192 bytes)
> May 18 13:17:18 door0036 kernel: [ 0.003680] Initializing cgroup subsys
> memory
> May 18 13:17:18 door0036 kernel: [ 0.003770] Initializing cgroup subsys
> devices
> May 18 13:17:18 door0036 kernel: [ 0.003821] Initializing cgroup subsys
> freezer
> May 18 13:17:18 door0036 kernel: [ 0.003873] Initializing cgroup subsys
> net_cls
> May 18 13:17:18 door0036 kernel: [ 0.003934] Initializing cgroup subsys
> blkio
> May 18 13:17:18 door0036 kernel: [ 0.004045] CPU: Testing write buffer
> coherency: ok
> May 18 13:17:18 door0036 kernel: [ 0.004158] ftrace: allocating 19615
> entries in 58 pages
> May 18 13:17:18 door0036 kernel: [ 0.052593] CPU0: update cpu_capacity 1024
> May 18 13:17:18 door0036 kernel: [ 0.052669] CPU0: thread -1, cpu 0,
> socket 15, mpidr 80000f00
> May 18 13:17:18 door0036 kernel: [ 0.052709] [bcm2709_smp_prepare_cpus]
> enter
> May 18 13:17:18 door0036 kernel: [ 0.052861] Setting up static identity
> map for 0x528738 - 0x52876c
> May 18 13:17:18 door0036 kernel: [ 0.112492] [bcm2709_boot_secondary]
> cpu:1 started (0) 16
> May 18 13:17:18 door0036 kernel: [ 0.112802] CPU1: Booted secondary
> processor
> May 18 13:17:18 door0036 kernel: [ 0.112810] [bcm2709_secondary_init]
> enter cpu:1
> May 18 13:17:18 door0036 kernel: [ 0.112866] CPU1: update cpu_capacity 1024
> May 18 13:17:18 door0036 kernel: [ 0.112875] CPU1: thread -1, cpu 1,
> socket 15, mpidr 80000f01
> May 18 13:17:18 door0036 kernel: [ 0.132476] [bcm2709_boot_secondary]
> cpu:2 started (0) 16
> May 18 13:17:18 door0036 kernel: [ 0.132724] CPU2: Booted secondary
> processor
> May 18 13:17:18 door0036 kernel: [ 0.132731] [bcm2709_secondary_init]
> enter cpu:2
> May 18 13:17:18 door0036 kernel: [ 0.132762] CPU2: update cpu_capacity 1024
> May 18 13:17:18 door0036 kernel: [ 0.132771] CPU2: thread -1, cpu 2,
> socket 15, mpidr 80000f02
> May 18 13:17:18 door0036 kernel: [ 0.152551] [bcm2709_boot_secondary]
> cpu:3 started (0) 18
> May 18 13:17:18 door0036 kernel: [ 0.152793] CPU3: Booted secondary
> processor
> May 18 13:17:18 door0036 kernel: [ 0.152800] [bcm2709_secondary_init]
> enter cpu:3
> May 18 13:17:18 door0036 kernel: [ 0.152831] CPU3: update cpu_capacity 1024
> May 18 13:17:18 door0036 kernel: [ 0.152839] CPU3: thread -1, cpu 3,
> socket 15, mpidr 80000f03
> May 18 13:17:18 door0036 kernel: [ 0.152934] Brought up 4 CPUs
> May 18 13:17:18 door0036 kernel: [ 0.153056] SMP: Total of 4 processors
> activated (153.60 BogoMIPS).
> May 18 13:17:18 door0036 kernel: [ 0.153089] CPU: All CPU(s) started in
> SVC mode.
> May 18 13:17:18 door0036 kernel: [ 0.154070] devtmpfs: initialized
> May 18 13:17:18 door0036 kernel: [ 0.178930] VFP support v0.3:
> implementor 41 architecture 2 part 30 variant 7 rev 5
> May 18 13:17:18 door0036 kernel: [ 0.180913] pinctrl core: initialized
> pinctrl subsystem
> May 18 13:17:18 door0036 kernel: [ 0.183999] NET: Registered protocol
> family 16
> May 18 13:17:18 door0036 kernel: [ 0.189659] DMA: preallocated 4096 KiB
> pool for atomic coherent allocations
> May 18 13:17:18 door0036 kernel: [ 0.190865] bcm2709.uart_clock = 3000000
> May 18 13:17:18 door0036 kernel: [ 0.193800] hw-breakpoint: found 5 (+1
> reserved) breakpoint and 4 watchpoint registers.
> May 18 13:17:18 door0036 kernel: [ 0.193853] hw-breakpoint: maximum
> watchpoint size is 8 bytes.
> May 18 13:17:18 door0036 kernel: [ 0.193910] mailbox: Broadcom VideoCore
> Mailbox driver
> May 18 13:17:18 door0036 kernel: [ 0.194043] bcm2708_vcio: mailbox at
> f300b880
> May 18 13:17:18 door0036 kernel: [ 0.194403] bcm_power: Broadcom power
> driver
> May 18 13:17:18 door0036 kernel: [ 0.194439] bcm_power_open() -> 0
> May 18 13:17:18 door0036 kernel: [ 0.194464] bcm_power_request(0, 8)
> May 18 13:17:18 door0036 kernel: [ 0.695142] bcm_mailbox_read -> 00000080, 0
> May 18 13:17:18 door0036 kernel: [ 0.695174] bcm_power_request -> 0
> May 18 13:17:18 door0036 kernel: [ 0.695317] Serial: AMBA PL011 UART driver
> May 18 13:17:18 door0036 kernel: [ 0.695465] dev:f1: ttyAMA0 at MMIO
> 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
> May 18 13:17:18 door0036 kernel: [ 1.205549] console [ttyAMA0] enabled
> May 18 13:17:18 door0036 kernel: [ 1.275689] SCSI subsystem initialized
> May 18 13:17:18 door0036 kernel: [ 1.279708] usbcore: registered new
> interface driver usbfs
> May 18 13:17:18 door0036 kernel: [ 1.285392] usbcore: registered new
> interface driver hub
> May 18 13:17:18 door0036 kernel: [ 1.290848] usbcore: registered new
> device driver usb
> May 18 13:17:18 door0036 kernel: [ 1.297771] Switched to clocksource
> arch_sys_counter
> May 18 13:17:18 door0036 kernel: [ 1.333387] FS-Cache: Loaded
> May 18 13:17:18 door0036 kernel: [ 1.336624] CacheFiles: Loaded
> May 18 13:17:18 door0036 kernel: [ 1.351134] NET: Registered protocol
> family 2
> May 18 13:17:18 door0036 kernel: [ 1.356790] TCP established hash table
> entries: 8192 (order: 3, 32768 bytes)
> May 18 13:17:18 door0036 kernel: [ 1.364044] TCP bind hash table
> entries: 8192 (order: 4, 65536 bytes)
> May 18 13:17:18 door0036 kernel: [ 1.370744] TCP: Hash tables configured
> (established 8192 bind 8192)
> May 18 13:17:18 door0036 kernel: [ 1.377214] TCP: reno registered
> May 18 13:17:18 door0036 kernel: [ 1.380491] UDP hash table entries: 512
> (order: 2, 16384 bytes)
> May 18 13:17:18 door0036 kernel: [ 1.386476] UDP-Lite hash table
> entries: 512 (order: 2, 16384 bytes)
> May 18 13:17:18 door0036 kernel: [ 1.393223] NET: Registered protocol
> family 1
> May 18 13:17:18 door0036 kernel: [ 1.398289] RPC: Registered named UNIX
> socket transport module.
> May 18 13:17:18 door0036 kernel: [ 1.404234] RPC: Registered udp
> transport module.
> May 18 13:17:18 door0036 kernel: [ 1.409004] RPC: Registered tcp
> transport module.
> May 18 13:17:18 door0036 kernel: [ 1.413722] RPC: Registered tcp NFSv4.1
> backchannel transport module.
> May 18 13:17:18 door0036 kernel: [ 1.421196] hw perfevents: enabled with
> armv7_cortex_a7 PMU driver, 5 counters available
> May 18 13:17:18 door0036 kernel: [ 1.429604] bcm2708_dma: DMA manager at
> f3007000
> May 18 13:17:18 door0036 kernel: [ 1.434398] vc-mem:
> phys_addr:0x00000000 mem_base=0x3ea00000 mem_size:0x3f000000(1008 MiB)
> May 18 13:17:18 door0036 kernel: [ 1.444218] futex hash table entries:
> 1024 (order: 4, 65536 bytes)
> May 18 13:17:18 door0036 kernel: [ 1.450718] audit: initializing netlink
> subsys (disabled)
> May 18 13:17:18 door0036 kernel: [ 1.456190] audit: type=2000
> audit(1.239:1): initialized
> May 18 13:17:18 door0036 kernel: [ 1.477855] VFS: Disk quotas dquot_6.5.2
> May 18 13:17:18 door0036 kernel: [ 1.482164] Dquot-cache hash table
> entries: 1024 (order 0, 4096 bytes)
> May 18 13:17:18 door0036 kernel: [ 1.491726] FS-Cache: Netfs 'nfs'
> registered for caching
> May 18 13:17:18 door0036 kernel: [ 1.498142] NFS: Registering the
> id_resolver key type
> May 18 13:17:18 door0036 kernel: [ 1.503290] Key type id_resolver registered
> May 18 13:17:18 door0036 kernel: [ 1.507485] Key type id_legacy registered
> May 18 13:17:18 door0036 kernel: [ 1.512683] msgmni has been set to 1948
> May 18 13:17:18 door0036 kernel: [ 1.518430] Block layer SCSI generic
> (bsg) driver version 0.4 loaded (major 252)
> May 18 13:17:18 door0036 kernel: [ 1.526026] io scheduler noop registered
> May 18 13:17:18 door0036 kernel: [ 1.530002] io scheduler deadline
> registered (default)
> May 18 13:17:18 door0036 kernel: [ 1.535472] io scheduler cfq registered
> May 18 13:17:18 door0036 kernel: [ 1.541962] BCM2708FB: allocated DMA
> memory fdc00000
> May 18 13:17:18 door0036 kernel: [ 1.546975] BCM2708FB: allocated DMA
> channel 0 @ f3007000
> May 18 13:17:18 door0036 kernel: [ 1.558490] Console: switching to
> colour frame buffer device 80x30
> May 18 13:17:18 door0036 kernel: [ 1.571133] bcm2708-dmaengine
> bcm2708-dmaengine: Load BCM2835 DMA engine driver
> May 18 13:17:18 door0036 kernel: [ 1.582722] uart-pl011 dev:f1: no DMA
> platform data
> May 18 13:17:18 door0036 kernel: [ 1.589650] kgdb: Registered I/O driver
> kgdboc.
> May 18 13:17:18 door0036 kernel: [ 1.618304] vc-cma: Videocore CMA driver
> May 18 13:17:18 door0036 kernel: [ 1.624146] vc-cma: vc_cma_base =
> 0x00000000
> May 18 13:17:18 door0036 kernel: [ 1.630736] vc-cma: vc_cma_size =
> 0x00000000 (0 MiB)
> May 18 13:17:18 door0036 kernel: [ 1.637958] vc-cma: vc_cma_initial =
> 0x00000000 (0 MiB)
> May 18 13:17:18 door0036 kernel: [ 1.656988] brd: module loaded
> May 18 13:17:18 door0036 kernel: [ 1.667712] loop: module loaded
> May 18 13:17:18 door0036 kernel: [ 1.673446] vchiq: vchiq_init_state:
> slot_zero = 0xbdc80000, is_master = 0
> May 18 13:17:18 door0036 kernel: [ 1.682922] Loading iSCSI transport
> class v2.0-870.
> May 18 13:17:18 door0036 kernel: [ 1.690565] usbcore: registered new
> interface driver smsc95xx
> May 18 13:17:18 door0036 kernel: [ 1.698173] dwc_otg: version 3.00a
> 10-AUG-2012 (platform bus)
> May 18 13:17:18 door0036 kernel: [ 1.906032] Core Release: 2.80a
> May 18 13:17:18 door0036 kernel: [ 1.910976] Setting default values for
> core params
> May 18 13:17:18 door0036 kernel: [ 1.917586] Finished setting default
> values for core params
> May 18 13:17:18 door0036 kernel: [ 2.125349] Using Buffer DMA mode
> May 18 13:17:18 door0036 kernel: [ 2.130395] Periodic Transfer Interrupt
> Enhancement - disabled
> May 18 13:17:18 door0036 kernel: [ 2.138009] Multiprocessor Interrupt
> Enhancement - disabled
> May 18 13:17:18 door0036 kernel: [ 2.145359] OTG VER PARAM: 0, OTG VER
> FLAG: 0
> May 18 13:17:18 door0036 kernel: [ 2.151561] Dedicated Tx FIFOs mode
> May 18 13:17:18 door0036 kernel: [ 2.157090]
> WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbdc14000 dma
> = 0xfdc14000 len=9024
> May 18 13:17:18 door0036 kernel: [ 2.170682] FIQ FSM acceleration
> enabled for :
> May 18 13:17:18 door0036 kernel: [ 2.170682] Non-periodic Split Transactions
> May 18 13:17:18 door0036 kernel: [ 2.170682] Periodic Split Transactions
> May 18 13:17:18 door0036 kernel: [ 2.170682] High-Speed Isochronous
> Endpoints
> May 18 13:17:18 door0036 kernel: [ 2.194510] WARN::hcd_init_fiq:412: FIQ
> on core 1 at 0x803d9b60
> May 18 13:17:18 door0036 kernel: [ 2.202222] WARN::hcd_init_fiq:413: FIQ
> ASM at 0x803d9ebc length 36
> May 18 13:17:18 door0036 kernel: [ 2.210277] WARN::hcd_init_fiq:438:
> MPHI regs_base at 0xbe80a000
> May 18 13:17:18 door0036 kernel: [ 2.218103] dwc_otg bcm2708_usb: DWC
> OTG Controller
> May 18 13:17:18 door0036 kernel: [ 2.224873] dwc_otg bcm2708_usb: new
> USB bus registered, assigned bus number 1
> May 18 13:17:18 door0036 kernel: [ 2.235873] dwc_otg bcm2708_usb: irq
> 32, io mem 0x00000000
> May 18 13:17:18 door0036 kernel: [ 2.243395] Init: Port Power? op_state=1
> May 18 13:17:18 door0036 kernel: [ 2.249218] Init: Power Port (0)
> May 18 13:17:18 door0036 kernel: [ 2.254546] usb usb1: New USB device
> found, idVendor=1d6b, idProduct=0002
> May 18 13:17:18 door0036 kernel: [ 2.263267] usb usb1: New USB device
> strings: Mfr=3, Product=2, SerialNumber=1
> May 18 13:17:18 door0036 kernel: [ 2.274221] usb usb1: Product: DWC OTG
> Controller
> May 18 13:17:18 door0036 kernel: [ 2.280845] usb usb1: Manufacturer:
> Linux 3.18.12-v7+ dwc_otg_hcd
> May 18 13:17:18 door0036 kernel: [ 2.288866] usb usb1: SerialNumber:
> bcm2708_usb
> May 18 13:17:18 door0036 kernel: [ 2.296163] hub 1-0:1.0: USB hub found
> May 18 13:17:18 door0036 kernel: [ 2.301898] hub 1-0:1.0: 1 port detected
> May 18 13:17:18 door0036 kernel: [ 2.308570] usbcore: registered new
> interface driver usb-storage
> May 18 13:17:18 door0036 kernel: [ 2.316748] mousedev: PS/2 mouse device
> common for all mice
> May 18 13:17:18 door0036 kernel: [ 2.324855] bcm2835-cpufreq: min=600000
> max=900000
> May 18 13:17:18 door0036 kernel: [ 2.331857] sdhci: Secure Digital Host
> Controller Interface driver
> May 18 13:17:18 door0036 kernel: [ 2.339921] sdhci: Copyright(c) Pierre
> Ossman
> May 18 13:17:18 door0036 kernel: [ 2.346288] DMA channels allocated for
> the MMC driver
> May 18 13:17:18 door0036 kernel: [ 2.387812] Load BCM2835 MMC driver
> May 18 13:17:18 door0036 kernel: [ 2.395305] sdhci-pltfm: SDHCI platform
> and OF driver helper
> May 18 13:17:18 door0036 kernel: [ 2.404825] ledtrig-cpu: registered to
> indicate activity on CPUs
> May 18 13:17:18 door0036 kernel: [ 2.415141] hidraw: raw HID events
> driver (C) Jiri Kosina
> May 18 13:17:18 door0036 kernel: [ 2.422929] usbcore: registered new
> interface driver usbhid
> May 18 13:17:18 door0036 kernel: [ 2.431529] usbhid: USB HID core driver
> May 18 13:17:18 door0036 kernel: [ 2.439719] TCP: cubic registered
> May 18 13:17:18 door0036 kernel: [ 2.444930] Initializing XFRM netlink
> socket
> May 18 13:17:18 door0036 kernel: [ 2.452238] NET: Registered protocol
> family 17
> May 18 13:17:18 door0036 kernel: [ 2.460851] Key type dns_resolver
> registered
> May 18 13:17:18 door0036 kernel: [ 2.467498] Registering SWP/SWPB
> emulation handler
> May 18 13:17:18 door0036 kernel: [ 2.475104] registered taskstats version 1
> May 18 13:17:18 door0036 kernel: [ 2.481278] vc-sm: Videocore shared
> memory driver
> May 18 13:17:18 door0036 kernel: [ 2.487722] [vc_sm_connected_init]: start
> May 18 13:17:18 door0036 kernel: [ 2.507935] Indeed it is in host mode
> hprt0 = 00021501
> May 18 13:17:18 door0036 kernel: [ 2.519348] [vc_sm_connected_init]: end
> - returning -1
> May 18 13:17:18 door0036 kernel: [ 2.519372] mmc0: host does not support
> reading read-only switch, assuming write-enable
> May 18 13:17:18 door0036 kernel: [ 2.538344] mmc0: new high speed SDHC
> card at address aaaa
> May 18 13:17:18 door0036 kernel: [ 2.546109] Waiting for root device
> /dev/mmcblk0p2...
> May 18 13:17:18 door0036 kernel: [ 2.553314] mmcblk0: mmc0:aaaa SL08G
> 7.40 GiB
> May 18 13:17:18 door0036 kernel: [ 2.561327] mmcblk0: p1 p2
> May 18 13:17:18 door0036 kernel: [ 2.660179] EXT4-fs (mmcblk0p2): INFO:
> recovery required on readonly filesystem
> May 18 13:17:18 door0036 kernel: [ 2.671381] EXT4-fs (mmcblk0p2): write
> access will be enabled during recovery
> May 18 13:17:18 door0036 kernel: [ 2.687871] usb 1-1: new high-speed USB
> device number 2 using dwc_otg
> May 18 13:17:18 door0036 kernel: [ 2.696519] Indeed it is in host mode
> hprt0 = 00001101
> May 18 13:17:18 door0036 kernel: [ 2.898305] usb 1-1: New USB device
> found, idVendor=0424, idProduct=9514
> May 18 13:17:18 door0036 kernel: [ 2.907195] usb 1-1: New USB device
> strings: Mfr=0, Product=0, SerialNumber=0
> May 18 13:17:18 door0036 kernel: [ 2.917359] hub 1-1:1.0: USB hub found
> May 18 13:17:18 door0036 kernel: [ 2.923383] hub 1-1:1.0: 5 ports detected
> May 18 13:17:18 door0036 kernel: [ 2.984365] EXT4-fs (mmcblk0p2):
> recovery complete
> May 18 13:17:18 door0036 kernel: [ 2.998879] EXT4-fs (mmcblk0p2):
> mounted filesystem with ordered data mode. Opts: (null)
> May 18 13:17:18 door0036 kernel: [ 3.011287] VFS: Mounted root (ext4
> filesystem) readonly on device 179:2.
> May 18 13:17:18 door0036 kernel: [ 3.021480] devtmpfs: mounted
> May 18 13:17:18 door0036 kernel: [ 3.027323] Freeing unused kernel
> memory: 384K (80754000 - 807b4000)
> May 18 13:17:18 door0036 kernel: [ 3.207986] usb 1-1.1: new high-speed
> USB device number 3 using dwc_otg
> May 18 13:17:18 door0036 kernel: [ 3.318199] usb 1-1.1: New USB device
> found, idVendor=0424, idProduct=ec00
> May 18 13:17:18 door0036 kernel: [ 3.327482] usb 1-1.1: New USB device
> strings: Mfr=0, Product=0, SerialNumber=0
> May 18 13:17:18 door0036 kernel: [ 3.342154] smsc95xx v1.0.4
> May 18 13:17:18 door0036 kernel: [ 3.403113] smsc95xx 1-1.1:1.0 eth0:
> register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet,
> b8:27:eb:5c:f8:6f
> May 18 13:17:18 door0036 kernel: [ 4.774578] bcm2708_spi 3f204000.spi:
> master is unqueued, this is deprecated
> May 18 13:17:18 door0036 kernel: [ 4.805098] bcm2708_spi 3f204000.spi:
> SPI Controller at 0x3f204000 (irq 80)
> May 18 13:17:18 door0036 kernel: [ 6.351724] EXT4-fs (mmcblk0p2):
> re-mounted. Opts: (null)
> May 18 13:17:18 door0036 kernel: [ 6.438074] usb 1-1.2: new full-speed
> USB device number 4 using dwc_otg
> May 18 13:17:18 door0036 kernel: [ 6.566849] usb 1-1.2: New USB device
> found, idVendor=072f, idProduct=2200
> May 18 13:17:18 door0036 kernel: [ 6.576172] usb 1-1.2: New USB device
> strings: Mfr=1, Product=2, SerialNumber=0
> May 18 13:17:18 door0036 kernel: [ 6.588101] usb 1-1.2: Product: ACR122U
> PICC Interface
> May 18 13:17:18 door0036 kernel: [ 6.595591] usb 1-1.2: Manufacturer: ACS
> May 18 13:17:18 door0036 kernel: [ 6.646672] EXT4-fs (mmcblk0p2):
> re-mounted. Opts: commit=120,errors=remount-ro
> May 18 13:17:18 door0036 kernel: [ 6.838050] usb 1-1.3: new full-speed
> USB device number 5 using dwc_otg
> May 18 13:17:18 door0036 kernel: [ 6.956879] usb 1-1.3: New USB device
> found, idVendor=072f, idProduct=2200
> May 18 13:17:18 door0036 kernel: [ 6.968442] usb 1-1.3: New USB device
> strings: Mfr=1, Product=2, SerialNumber=0
> May 18 13:17:18 door0036 kernel: [ 6.980460] usb 1-1.3: Product: ACR122U
> PICC Interface
> May 18 13:17:18 door0036 kernel: [ 6.980471] usb 1-1.3: Manufacturer: ACS
> May 18 13:17:18 door0036 kernel: [ 9.112632] random: nonblocking pool is
> initialized
> May 18 13:17:18 door0036 kernel: [ 9.556215] FAT-fs (mmcblk0p1): Volume
> was not properly unmounted. Some data may be corrupt. Please run fsck.
> May 18 13:17:18 door0036 kernel: [ 11.009203] NET: Registered protocol
> family 10
> May 18 13:17:18 door0036 kernel: [ 11.340409] smsc95xx 1-1.1:1.0 eth0:
> hardware isn't capable of remote wakeup
> May 18 13:17:18 door0036 kernel: [ 11.350282] IPv6: ADDRCONF(NETDEV_UP):
> eth0: link is not ready
> May 18 13:17:18 door0036 kernel: [ 12.952403] smsc95xx 1-1.1:1.0 eth0:
> link up, 100Mbps, full-duplex, lpa 0xC5E1
> May 18 13:17:18 door0036 kernel: [ 12.966604] IPv6:
> ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> May 18 13:17:18 door0036 kernel: [ 22.056488] ip_tables: (C) 2000-2006
> Netfilter Core Team
> May 18 13:17:18 door0036 kernel: [ 22.221835] nf_conntrack version 0.5.0
> (15596 buckets, 62384 max)
> May 18 13:17:18 door0036 kernel: [ 22.309802] ip6_tables: (C) 2000-2006
> Netfilter Core Team
> May 18 13:17:19 door0036 pcscd: ccid_usb.c:514:OpenUSBByName() Can't claim
> interface 1/4: -6
> May 18 14:16:58 door0036 mono: CardReaderWatcherService.exe: Service
> Service1 started
>
> Regards,
>
> Tom
>
>
>
>
>
> ----------
> _______________________________________________
> Pcsclite-muscle mailing list
> Pcsclite-muscle at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pcsclite-muscle
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/pcsclite-muscle/attachments/20150519/8fdb9bb4/attachment-0001.html>
More information about the pcsclite-muscle
mailing list