[Pcsclite-muscle] Problem reading certificate from SCM Microsystems SCR3500 (and others)

Thu Apr 9 04:22:50 PDT 2015

I have 2 cardreaders:
1. Omnikey AG CardMAn 3121 SC
2. SCM Microsystems SCR3500

And I have 2 smartcards with different certificates.
1. Old certificate
2. New certificate

Reading the first card with both readers is successful.
Reading the other card fails gives an error with the first cardreader 
but is successful in the end:

Device info:
00000025 hotplug_libudev.c:435:HPAddDevice() Adding USB device: OMNIKEY 
AG CardMan 3121
00000058 readerfactory.c:1011:RFInitializeReader() Attempting startup of 
OMNIKEY AG CardMan 3121 00 00 using 
[path]/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so
00000227 readerfactory.c:896:RFBindFunctions() Loading IFD Handler 3.0
00000051 ifdhandler.c:1927:init_driver() Driver version: 1.4.18

Inserting the card:
00000013 eventhandler.c:418:EHStatusHandlerThread() Card inserted into 
OMNIKEY AG CardMan 3121 00 00
00000015 Card ATR: 3B FA 18 00 00 81 31 FE 45 06 08 2A 84 10 01 87 6E 08 
07 BE
05000729 ifdhandler.c:1139:IFDHPowerICC() action: PowerDown, 
usb:076b/3021:libudev:0:/dev/bus/usb/003/002 (lun: 0)

Reading card data gives only this error (5 times):
00000009 ifdhandler.c:1283:IFDHTransmitToICC() 
usb:076b/3021:libudev:0:/dev/bus/usb/003/002 (lun: 0)
00000010 commands.c:1740:CmdXfrBlockTPDU_T0() T=0: 7 bytes
00000011 -> 000000 6F 07 00 00 00 00 15 00 00 00 00 A4 00 0C 02 3F 00
00036373 <- 000000 80 4F 00 00 00 00 15 00 00 00 49 20 61 6D 20 74 68 65 
20 53 61 66 65 53 69 67 6E 20 41 70 70 6C 65 74 20 6F 66 20 41 2E 45 2E 
54 2E 20 45 75 72 6F 70 65 20 42 2E 56 2E 20 70 6C 65 61 73 65 20 61 75 
74 68 65 6E 74 69 63 61 74 65 20 79 6F 75 72 73 65 6C 66 2E 0A 90 00
00000029 commands.c:1560:CCID_Receive() overrun by 77 bytes
00000012 ifdwrapper.c:550:IFDTransmit() Card not transacted: 618
00000009 winscard.c:1633:SCardTransmit() Card not transacted: 0x80100016
00000010 winscard.c:1653:SCardTransmit() UnrefReader() count was: 2

The card is usable by other clients through the pcsc-lite library.

---------------------------------------------------------------------------------------
Reading the other card fails at an other position and fails totaly:

Device info:
00000022 hotplug_libudev.c:435:HPAddDevice() Adding USB device: SCM 
Microsystems Inc. SCR 355
00000076 ifdhandler.c:375:IFDHGetCapabilities() tag: 0xFAF, 
usb:076b/3021:libudev:0:/dev/bus/usb/003/002 (lun: 0)
00000022 readerfactory.c:679:RFSetReaderName() Support 16 simultaneous 
readers
00000018 ifdhandler.c:375:IFDHGetCapabilities() tag: 0xFAD, 
usb:076b/3021:libudev:0:/dev/bus/usb/003/002 (lun: 0)
00000016 readerfactory.c:296:RFAddReader() Driver is thread safe
00000016 readerfactory.c:1011:RFInitializeReader() Attempting startup of 
SCM Microsystems Inc. SCR 355 [CCID Interface] 01 00 using 
[path]/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so

Inserting the card:
00000013 eventhandler.c:418:EHStatusHandlerThread() Card inserted into 
OMNIKEY AG CardMan 3121 00 00
00000015 Card ATR: 3B FA 18 00 00 81 31 FE 45 06 08 2A 84 10 01 87 6E 08 
07 BE
05000729 ifdhandler.c:1139:IFDHPowerICC() action: PowerDown, 
usb:076b/3021:libudev:0:/dev/bus/usb/003/002 (lun: 0)

Reading card data gives first this error:
00000011 sending: 00 00 07 00 A4 00 0C 02 3F 00 92
00000013 -> 000001 6F 0B 00 00 00 00 11 00 00 00 00 00 07 00 A4 00 0C 02 
3F 00 92
00023571 <- 000001 80 53 00 00 00 00 11 00 00 00 00 00 4F 49 20 61 6D 20 
74 68 65 20 53 61 66 65 53 69 67 6E 20 41 70 70 6C 65 74 20 6F 66 20 41 
2E 45 2E 54 2E 20 45 75 72 6F 70 65 20 42 2E 56 2E 20 70 6C 65 61 73 65 
20 61 75 74 68 65 6E 74 69 63 61 74 65 20 79 6F 75 72 73 65 6C 66 2E 0A 
90 00 8C
00000055 received: 00 00 4F 49 20 61 6D 20 74 68 65 20 53 61 66 65 53 69 
67 6E 20 41 70 70 6C 65 74 20 6F 66 20 41 2E 45 2E 54 2E 20 45 75 72 6F 
70 65 20 42 2E 56 2E 20 70 6C 65 61 73 65 20 61 75 74 68 65 6E 74 69 63 
61 74 65 20 79 6F 75 72 73 65 6C 66 2E 0A 90 00 8C
00000014 openct/proto-t1.c:356:t1_transceive()
00000009 openct/proto-t1.c:384:t1_transceive() buffer overrun by 77 bytes
00000012 ifdwrapper.c:550:IFDTransmit() Card not transacted: 612
00000009 winscard.c:1633:SCardTransmit() Card not transacted: 0x80100016
00000009 winscard.c:1653:SCardTransmit() UnrefReader() count was: 2

After that I see the following errors:
00000016 winscard.c:1608:SCardTransmit() Send Protocol: T=1
00000011 ifdhandler.c:1283:IFDHTransmitToICC() 
usb:04e6/5410:libudev:0:/dev/bus/usb/002/008 (lun: 10000)
00000011 commands.c:2212:CmdXfrBlockTPDU_T1() T=1: 7 and 2 bytes
00000010 openct/proto-t1.c:171:t1_transceive() T=1 state machine is 
DEAD. Reset the card first.
00000010 ifdwrapper.c:550:IFDTransmit() Card not transacted: 612
00000009 winscard.c:1633:SCardTransmit() Card not transacted: 0x80100016
00000010 winscard.c:1653:SCardTransmit() UnrefReader() count was: 2

It seems the new certificate is larger than the previous certificate.

This error we also get with other cardreaders: for example: O2 Micro Oz776

How can we fix this problem?