[Pcsclite-muscle] Problems installing ACR1251, ACR1252 on Raspbian

[Ludovic Rousseau]

2014-12-04 18:49 GMT+01:00 Tom Arnautovic <Tom.Arnautovic at neardesk.com>:

>  Hi All,
>

Hello,

I have an ACR122U, ACR1251 and ACR1252.  When I plug the ACR122U directly
> into the Raspberry Pi (B) and then run the command (OpenSC):
>
>
>
> opensc-tool --list-readers
>
>
>
> I get the output:
>
>
>
> Nr.  Card  Features  Name
>
> 0    No              ACS ACR122U PICC Interface 00 00
>
>
>
> However, when I plug in either the ACR1251 or ACR1252 and run the same
> command ? no devices are listed.
>
>
>
> However, the /var/log/messages does display:
>
>
>
> Dec  4 17:34:50 monit2 kernel: [ 2639.005593] usb 1-1.2: new full-speed
> USB device number 14 using dwc_otg
>
> Dec  4 17:34:50 monit2 kernel: [ 2639.136265] usb 1-1.2: not running at
> top speed; connect to a high speed hub
>
> Dec  4 17:34:50 monit2 kernel: [ 2639.157158] usb 1-1.2: New USB device
> found, idVendor=072f, idProduct=223b
>
> Dec  4 17:34:50 monit2 kernel: [ 2639.173078] usb 1-1.2: New USB device
> strings: Mfr=1, Product=2, SerialNumber=0
>
> Dec  4 17:34:50 monit2 kernel: [ 2639.189194] usb 1-1.2: Product: ACR1252
> Dual Reader
>
> Dec  4 17:34:50 monit2 kernel: [ 2639.203370] usb 1-1.2: Manufacturer: ACS
>
>
>
> Does this mean that the system recognises the USB device but does not have
> the right drivers to install?  Anybody any ideas on how to get these
> working?
>

I do not have the ACR1251 and ACR1252 readers in my list.
The first step is to follow
http://pcsclite.alioth.debian.org/ccid.html#CCID_compliant

No need to use a Raspberry Pi for that. A normal PC with GNU/Lunix is
enough.

Bye

-- 
 Dr. Ludovic Rousseau
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/pcsclite-muscle/attachments/20141204/9b4858aa/attachment-0001.html>