<html><body><div dir="ltr" text-align="left"><div dir="auto" style="direction: ltr; margin: 0; padding: 0; font-family: sans-serif; font-size: 11pt; color: black; ">Hi Vincent,<br></div><div dir="auto" style="direction: ltr; margin: 0; padding: 0; font-family: sans-serif; font-size: 11pt; color: black; ">
<div dir="auto" style="direction: ltr; margin: 0; padding: 0; font-family: sans-serif; font-size: 11pt; color: black; ">I have tried short distance with ddwrt and i get 1733/1733 datarates and about 1Gbps real traffic using iperf. Ubiquiti and MikroTik have 80MHz outdoor radios and they work good. I don't want to use 160MHz which is very wide and there are lot of 20MHz channels within that will create interferences. Actually i want to benefit from VHT-NSS4 so at 80MHz channel i will get 1560Mbps. Ben Greear also thinks that is something wrong with ACK timing.</div><div id="id-e1286fd3-9f2e-4753-a2e1-1ea87be2b6ad" class="ms-outlook-mobile-reference-message"><hr style="display:inline-block;width:98%" tabindex="-1"><div id="divRplyFwdMsg" style="font-family: Helvetica, Arial, sans-serif;font-size: 12pt;line-height: 13pt;color: #000000"><strong>From:</strong> Vincent Wiemann <email@example.com><br><strong>Sent:</strong> Friday, 20 September 2019, 21:56<br><strong>To:</strong> firstname.lastname@example.org; email@example.com<br><strong>Subject:</strong> Re: [OpenWrt-Devel] QCA9994 outdoor 13km link<br></div><br>Hi Klevis,
have you tried it with a short distance?
If you did you should better ask Ben Greear directly.
By the way ath10k gen 2 chipsets don't work very well with long distance links without a
special feature which implementation is only available to companies like Ubiquiti and very few
people who have an own reverse-engineered implementation.
It works on IPQ401X, QCA9886 and QCA9888 based chips only.
And it is not possible to set a coverage class for gen 2 devices, yet as far as I know due to missing
documentation and implementation (correct me if that information is outdated).
Furthermore a high channel width often results in problems
due to lower receiver sensibility.
We have better experiences with lower channel widths and sometimes get more throughput with that.
Actually I think this does not explain your connection issues as 13 km is not that much.
On 20.09.19 18:30, firstname.lastname@example.org wrote:
> Hello everyone,
> I am trying to setup a custom made outdoor link with Apu2d2 board devices and QCA9994 cards from compex. After i installed openwrt and ath10k ct driver, kmod ath10k and board-2.bin the device can run a 80MHz channel in WDS AP. The problem is that it won't run as station or station wds. It can scan
> the SSIDs but won't connect them.
> Any suggestion?
> Thank you!