<div dir="ltr">Hello,<div><br></div><div>I had a working build r42397 which was stable enough so I didn't touch it until today.</div><div>I built openwrt trunk r48016 (last night) and everything built without any issues.</div><div><br></div><div>I like to load thing the factory image but this time loading the factory image resulted in no internet. Router came on, I could see activity on the indicator lights but no IP. I did notice that the front LED light do not stay on after the factory install on this build. On a working build, the front LED stays on (solid) when working (default config). </div><div><br></div><div>I have LUCI pre-baked as I use the same configs. I personally run a diff between the configs and didn't see anything that would have broken booting from factory flash install.</div><div><br></div><div>Then I reverted to a working openwrt (r46900) build that I factory-flashed and then proceeded to do a sysupgrade of r48016 (and wipe existing settings). This WORKED, the router boots.</div><div><br></div><div>Something seems to be not working with factory install, but is working with the sysupgrade. I have no way to debug this. Just thought I should bring this to the attention of the devs in the forum.</div><div><br></div><div>Thank you,</div><div>cchhat01</div></div>