<div dir="ltr">I followed the same steps and its working too. But this i want in wireless config file, Because i dont want every time to add using GUI. So When i connect to another router also, no need to add one more. I mean to say it should be in default wireless config file. <br></div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Aug 10, 2015 at 6:18 PM, David Lang <span dir="ltr"><<a href="mailto:david@lang.hm" target="_blank">david@lang.hm</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><span class="">On Mon, 10 Aug 2015, John kerry wrote:<br>
<br>
</span><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Date: Mon, 10 Aug 2015 18:10:14 +0800<br>
From: John kerry <<a href="mailto:kerry9842@gmail.com" target="_blank">kerry9842@gmail.com</a>><br>
To: Alex Weedy <<a href="mailto:weedy2887@gmail.com" target="_blank">weedy2887@gmail.com</a>>,<br>
OpenWrt Development List <<a href="mailto:openwrt-devel@lists.openwrt.org" target="_blank">openwrt-devel@lists.openwrt.org</a>><br>
Subject: [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi<span class=""><br>
client/AP interfaces on one radio)<br>
<br></span><span class="">
Firstly i configure wireless config as below:<br>
<br>
config wifi-device 'wifi0'<br>
option type 'qcawifi'<br>
option macaddr '00:01:11:00:01:00'<br>
option hwmode '11ng'<br>
option txpower '17'<br>
option htmode 'HT20'<br>
option disabled '0'<br>
option channel '1'<br>
<br>
config wifi-iface<br>
option device 'wifi0'<br>
option mode 'ap'<br>
option ssid 'Testing_ap'<br>
option network 'lan'<br>
option encryption 'psk2'<br>
option key 'Testing_ap'<br>
<br>
so its SSID was showing and able to connect any device to it.<br>
<br>
Then i scan the device and connect to one of it. While joining the network<br>
i selected Client(WDS) then the wireless config becomes like below:<br>
</span></blockquote>
<br>
why don't you try following the steps in the video that you posted.<br>
<br>
first connect as a client, then add an additional interface and make the second interface the AP for things to connect to.<br>
<br>
the order may make a difference.<span class="HOEnZb"><font color="#888888"><br>
<br>
David Lang</font></span><div class="HOEnZb"><div class="h5"><br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
config wifi-device 'wifi0'<br>
option type 'qcawifi'<br>
option macaddr '00:01:11:00:01:00'<br>
option hwmode '11ng'<br>
option txpower '17'<br>
option htmode 'HT20'<br>
option disabled '0'<br>
option channel '1'<br>
<br>
config wifi-iface<br>
option network 'wwan'<br>
option ssid 'D_Link_Router'<br>
option encryption 'psk2'<br>
option device 'wifi0'<br>
option mode 'sta'<br>
option key 'Dlink_Router'<br>
option wds '1'<br>
<br>
Then i added one as shown in the video. Now its connected to router also<br>
and this add one also showing so i can connect to this also.<br>
<br>
But i am not getting how to keep this in default wireless config.<br>
<br>
Because every time we cant add one to configure like this. It should be<br>
like default should be in ap mode so any device we can connect, if its<br>
connected to another router also that SSID still should be visible and able<br>
to connect to this.<br>
</blockquote>
<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
On Mon, Aug 10, 2015 at 2:57 PM, John kerry <<a href="mailto:kerry9842@gmail.com" target="_blank">kerry9842@gmail.com</a>> wrote:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
When i try to configure based on video, its shows 2 one as client another<br>
one as Master but i am not able to enable it . I mean to say wireless<br>
becomes disable. If i enable it using GUI also its not happening.<br>
<br>
On Mon, Aug 10, 2015 at 2:55 PM, David Lang <<a href="mailto:david@lang.hm" target="_blank">david@lang.hm</a>> wrote:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
What happens when you try to follow the video?<br>
<br>
Based on your comments, i'm guessing that things don't work when you try<br>
and configure the second network and have it with a different SSID than the<br>
first network that you put in client mode.<br>
<br>
Is this correct?<br>
<br>
David Lang<br>
<br>
On Mon, 10 Aug 2015, John kerry wrote:<br>
<br>
Yes, When i am connecting to Another router its changed to Client mode.<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
Can i configure this in repeater mode like its shows in below link:<br>
<br>
<a href="https://www.youtube.com/watch?v=3rbsh2zxPnk" rel="noreferrer" target="_blank">https://www.youtube.com/watch?v=3rbsh2zxPnk</a><br>
<br>
</blockquote>
<br>
</blockquote>
<br>
</blockquote>
</blockquote>
</div></div><br>_______________________________________________<br>
openwrt-devel mailing list<br>
<a href="mailto:openwrt-devel@lists.openwrt.org">openwrt-devel@lists.openwrt.org</a><br>
<a href="https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel" rel="noreferrer" target="_blank">https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel</a><br>
<br></blockquote></div><br></div>