<div dir="ltr"><div>Hi, <br><br>I am using ar71xx OpenWrt. I have connected internet connection to WAN port and my PC to LAN. I have enabled the WiFi0. The LAN port static IP i am able to open GUI and even my mobile i connected to Wifi AP and able to open GUI in mobile. But I am not able to access internet on mobile which is connected to wifi0 AP.<br><br>I have added below script under /etc/firewall.user file.<br>iptables ...flush<br>iptables --table nat --flush<br>iptables --delete-chain<br>iptables --table nat --delete-chain<br>iptables -A FORWARD -j ACCEPT -i br-lan -o eth0.2 -m state --state NEW<br>iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT<br>iptables -A POSTROUTING -t nat -o eth0.2 -j MASQUERADE<br>echo 1 > /proc/sys/net/ipv4/ip_forward<br><br>#where br-lan = LAN<br> eth0.2 = WAN<br><br>Could anyone help me to write the proper NAT rules so that able to access the internet.<br><br></div>Thanks,<br></div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Aug 3, 2015 at 11:29 AM, John kerry <span dir="ltr"><<a href="mailto:kerry9842@gmail.com" target="_blank">kerry9842@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div>Hello Guys,<br><br></div>It's working. Thanks a lot to all of you :) <br></div><div class="HOEnZb"><div class="h5"><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Aug 3, 2015 at 10:43 AM, David Lang <span dir="ltr"><<a href="mailto:david@lang.hm" target="_blank">david@lang.hm</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">The way to do this is to first forget about the factory reset problem and configure the AP to do what you want (including any encryption)<br>
<br>
then you can take the resulting file and put it into the build system so that it becomes the 'factory default' settings.<br>
<br>
Since you are not understanding how to configure the files from the documentation, configure them from the GUI and then look at the resulting files.<span><font color="#888888"><br>
<br>
David Lang</font></span><div><div><br>
<br>
On Mon, 3 Aug 2015, John kerry wrote:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Hi All,<br>
<br>
I created separate files directory and added network and wireless files and<br>
its working everything but still i am not able to use encryption wpa2.<br>
Below is the my script.<br>
config wifi-device wifi0<br>
option type qcawifi<br>
option channel auto<br>
option macaddr 00:03:7f:42:06:61<br>
option hwmode 11ng<br>
# REMOVE THIS LINE TO ENABLE WIFI:<br>
option disabled 0<br>
<br>
config wifi-iface<br>
option device wifi0<br>
option network lan<br>
option mode ap<br>
option ssid CD-1<br>
option encryption psk2<br>
option key CD-1<br>
<br>
M I doing anything wrong?<br>
<br>
Thanks,<br>
<br>
On Mon, Aug 3, 2015 at 6:40 AM, David Lang <<a href="mailto:david@lang.hm" target="_blank">david@lang.hm</a>> wrote:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
to make the config be there after a factory reset, you need to put the<br>
changes into the image that you build.<br>
<br>
you already did this for /etc/config/network, do the same thing for<br>
/etc/config/wireless<br>
<br>
David Lang<br>
<br>
<br>
On Sun, 2 Aug 2015, John kerry wrote:<br>
<br>
Hi Leiten,<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
I have one issue, after upgrading this firmware it will load wireless<br>
configuration with this changes, actually it should load when i do factory<br>
reset.<br>
<br>
Thanks,<br>
<br>
On Sun, Aug 2, 2015 at 3:45 PM, John kerry <<a href="mailto:kerry9842@gmail.com" target="_blank">kerry9842@gmail.com</a>> wrote:<br>
<br>
Hi Leiten,<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
Thank you so much, Its working :)<br>
<br>
On Sun, Aug 2, 2015 at 3:12 PM, N.Leiten <<a href="mailto:nickleiten@gmail.com" target="_blank">nickleiten@gmail.com</a>> wrote:<br>
<br>
Hi,<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
Don't answer to my e-mail only, you need to add openwrt-devel maillist<br>
to<br>
CC or just answer to CC, in each case I'll receive message but also<br>
everyone could see all discussion.<br>
<br>
In email dated Воскресенье - 02 августа 2015 12:54:32 user John kerry<br>
wrote:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Hi Leiten,<br>
<br>
I have added new files under and written below :<br>
vi target/linux/ar71xx/base-files/etc/uci-defaults/wireless<br>
<br>
</blockquote>
<br>
Use index in prefix of filename to set order of execution, so it'll be<br>
like '99-wireless'.<br>
<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
#!/bin/sh<br>
#<br>
# Copyright (c) 2013 The Linux Foundation. All rights reserved.<br>
# Copyright (C) 2011 OpenWrt.org<br>
#<br>
<br>
[ -e /etc/config/wireless ] && exit 0<br>
<br>
</blockquote>
<br>
Here is the problem. When uci-defaults invoke scripts there's already<br>
preconfiguration done and /etc/config/wireless already exists, so your<br>
script just exit at this point. Remove this line.<br>
<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
touch /etc/config/wireless<br>
<br>
uci set wireless.@wifi-device[0].disabled=0;<br>
uci set system.@system[0].hostname=test_ap<br>
uci set wireless.@wifi-iface[0].mode=ap<br>
uci set wireless.@wifi-iface[0].ssid=CD-2.4D<br>
uci set wireless.@wifi-iface[0].encryption=none<br>
uci set wireless.@wifi-iface[0].wds=1<br>
uci set wireless.radio0.disabled=0<br>
<br>
uci commit wireless<br>
<br>
exit 0<br>
<br>
and compile the source code using make V=s but still not changed<br>
default<br>
settings.<br>
<br>
Please help me to make it works.<br>
<br>
Thanks,<br>
<br>
<br>
On Sat, Aug 1, 2015 at 4:38 PM, N.Leiten <<a href="mailto:nickleiten@gmail.com" target="_blank">nickleiten@gmail.com</a>> wrote:<br>
<br>
You can also use uci-defaults mechanism for your purpose. Just put<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
script in base-files/etc/uci-defaults and set your preferrable<br>
parameters with uci and don't forget to 'exit 0' at the end of script,<br>
in elsecase it'll be run every time at boot ruining changes.<br>
<br>
2015-07-31 12:08 GMT+03:00 John kerry <<a href="mailto:kerry9842@gmail.com" target="_blank">kerry9842@gmail.com</a>>:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Hi,<br>
<br>
I am working on Ar71xx openWRT Luci project. By default the Wi-Fi is<br>
disabled and SSID is OpenWrt. I need to change the default settings.<br>
Could anyone help me to change the default settings.<br>
<br>
<br>
Best Regards,<br>
John<br>
<br>
_______________________________________________<br>
openwrt-devel mailing list<br>
<a href="mailto:openwrt-devel@lists.openwrt.org" target="_blank">openwrt-devel@lists.openwrt.org</a><br>
<a href="https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel" rel="noreferrer" target="_blank">https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel</a><br>
<br>
_______________________________________________<br>
</blockquote>
openwrt-devel mailing list<br>
<a href="mailto:openwrt-devel@lists.openwrt.org" target="_blank">openwrt-devel@lists.openwrt.org</a><br>
<a href="https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel" rel="noreferrer" target="_blank">https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel</a><br>
<br>
_______________________________________________<br>
</blockquote></blockquote>
openwrt-devel mailing list<br>
<a href="mailto:openwrt-devel@lists.openwrt.org" target="_blank">openwrt-devel@lists.openwrt.org</a><br>
<a href="https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel" rel="noreferrer" target="_blank">https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel</a><br>
<br>
<br>
</blockquote>
<br>
<br>
</blockquote></blockquote></blockquote>
</blockquote>
</div></div></blockquote></div><br></div>
</div></div></blockquote></div><br></div>