<div dir="ltr"><div>Hi,<br><br><br></div><div>Using Script we can set both either 2.4GHz or 5Ghz using "<b>option hwmode '11na</b>"<br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Tue, Aug 4, 2015 at 4:13 PM, John kerry <span dir="ltr"><<a href="mailto:kerry9842@gmail.com" target="_blank">kerry9842@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div><div>Hi,<br><br></div>I have 2 radio's wifi0 and wifi1 but one is configured for 2.4GHz and another one is configured for 5GHz as below:<br><br><img alt="Inline image 1" src="cid:ii_14ef7be4a45e3043" height="131" width="561"><br><br></div><div>First one i configured as below:<br><br><img alt="Inline image 2" src="cid:ii_14ef7bf63b7a98d6" height="353" width="561"><br><br></div><div>wifi1 configured as below:<br><br><br><img alt="Inline image 3" src="cid:ii_14ef7c042c261be3" height="314" width="561"><br></div><div>mode configured as client and Network is WAN.<br><br></div><div>Is this are correct?<br><br></div><div>I have one doubts, both should be configured either 2.4GHz or 5GHz but for wifi1 in GUI there is no option to change to 2.4GHz.<br></div><div><br></div><div>Thanks,<br></div></div><div class="HOEnZb"><div class="h5"><div class="gmail_extra"><br><div class="gmail_quote">On Tue, Aug 4, 2015 at 2:56 PM, David Lang <span dir="ltr"><<a href="mailto:david@lang.hm" target="_blank">david@lang.hm</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">you can't create a new radio with a script, you have to have a second radio in the hardware.<br>
<br>
wifi0 is one radio, wifi1 is the second. configure one as an AP, the other as a client (you probably want to make the client be part of the wan interface/firewall group if it's your connection to the Internet)<br>
<br>
As I said before, since you don't understand how the configs work, I'd suggest using the GUI to configure them and then look at what the resulting file looks like. A lot of expertise went into making the GUI set the right config options to make pretty complex things happen.<span><br>
<br>
David Lang<br>
<br>
On Tue, 4 Aug 2015, John kerry wrote:<br>
<br>
</span><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Date: Tue, 4 Aug 2015 14:41:38 +0800<span><br>
From: John kerry <<a href="mailto:kerry9842@gmail.com" target="_blank">kerry9842@gmail.com</a>><br>
To: David Lang <<a href="mailto:david@lang.hm" target="_blank">david@lang.hm</a>><br></span>
Cc: Weedy <<a href="mailto:weedy2887@gmail.com" target="_blank">weedy2887@gmail.com</a>>, N. Leiten <<a href="mailto:nickleiten@gmail.com" target="_blank">nickleiten@gmail.com</a>>,<br>
OpenWrt Development List <<a href="mailto:openwrt-devel@lists.openwrt.org" target="_blank">openwrt-devel@lists.openwrt.org</a>><span><br>
Subject: Re: [OpenWrt-Devel] Change OpenWrt Wifi default settings<br>
<br></span><span>
Hi,<br>
<br>
Yes i configured the mode as AP. could you please guide how i can add<br>
script for another radio.<br>
<br>
presently my wireless script is as below:<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br></span>
*config wifi-device 'wifi0' option type 'qcawifi' option<span><br>
channel 'auto' option macaddr '00:03:7f:42:06:61' option<br>
hwmode '11ng' option txpower '19' option htmode 'HT20'config<br>
wifi-iface option device 'wifi0' option network 'lan'<br>
option mode 'ap' option encryption 'psk2' option ssid<br></span>
'Test_ap_1' option key **'Test_ap_1'*<span><br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
*config wifi-device 'wifi1' option type 'qcawifi' option<br>
channel 'auto' option macaddr '00:03:7f:42:06:62' option<br>
hwmode '11na' option txpower '23' option htmode 'HT20'config<br>
wifi-iface option device 'wifi1' option network 'lan'<br>
option mode 'ap' option ssid 'Test_ap_2' option encryption<br>
'psk2' option key 'test_ap_2'*<br>
<br>
<br></span>
*How i can change this to make it work.*<div><div><br>
<br>
<br>
*Thanks,*<br>
<br>
On Tue, Aug 4, 2015 at 2:26 PM, David Lang <<a href="mailto:david@lang.hm" target="_blank">david@lang.hm</a>> wrote:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
A given radio can be either an AP or a client, but not both at once.<br>
<br>
so if you use a radio to connect to another AP, you are making it a<br>
client, and in client mode all it can do is connect to that other AP as<br>
shows up as the SSID of that other AP.<br>
<br>
you can do this with one radio, while using the other radio (assuming you<br>
have two) to act as an AP for local clients.<br>
<br>
David Lang<br>
<br>
On Tue, 4 Aug 2015, John kerry wrote:<br>
<br>
Hi,<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
Its working, i am able to access internet but there is one problem,<br>
<br>
When i scan the wireless devices, its gives the list of devices are there<br>
nearby, then i connect anyone device, it will connect but my board wifi0<br>
SSID name will change to that router which i connected. I mean LAN side<br>
SSID should not change after connecting to WAN SSID.<br>
<br>
<br>
<br>
On Tue, Aug 4, 2015 at 12:42 PM, John kerry <<a href="mailto:kerry9842@gmail.com" target="_blank">kerry9842@gmail.com</a>> wrote:<br>
<br>
Hi<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
This is my firewall file:<br>
<br>
config defaults<br>
option syn_flood '1'<br>
option input 'ACCEPT'<br>
option output 'ACCEPT'<br>
option forward 'REJECT'<br>
<br>
config zone<br>
option name 'lan'<br>
option network 'lan'<br>
option input 'ACCEPT'<br>
option output 'ACCEPT'<br>
option forward 'REJECT'<br>
<br>
config zone<br>
option name 'wan'<br>
option network 'wan'<br>
option input 'REJECT'<br>
option output 'ACCEPT'<br>
option forward 'REJECT'<br>
option masq '1'<br>
option mtu_fix '1'<br>
<br>
config forwarding<br>
option src 'lan'<br>
option dest 'wan'<br>
<br>
config rule<br>
option name 'Allow-DHCP-Renew'<br>
option src 'wan'<br>
option proto 'udp'<br>
option dest_port '68'<br>
option target 'ACCEPT'<br>
option family 'ipv4'<br>
<br>
config rule<br>
option name 'Allow-Ping'<br>
option src 'wan'<br>
option proto 'icmp'<br>
option icmp_type 'echo-request'<br>
option family 'ipv4'<br>
option target 'ACCEPT'<br>
<br>
config rule<br>
option name 'Allow-DHCPv6'<br>
option src 'wan'<br>
option proto 'udp'<br>
option src_ip 'fe80::/10'<br>
option src_port '547'<br>
option dest_ip 'fe80::/10'<br>
option dest_port '546'<br>
option family 'ipv6'<br>
option target 'ACCEPT'<br>
<br>
config rule<br>
option name 'Allow-ICMPv6-Input'<br>
option src 'wan'<br>
option proto 'icmp'<br>
list icmp_type 'echo-request'<br>
list icmp_type 'echo-reply'<br>
list icmp_type 'destination-unreachable'<br>
list icmp_type 'packet-too-big'<br>
list icmp_type 'time-exceeded'<br>
list icmp_type 'bad-header'<br>
list icmp_type 'unknown-header-type'<br>
list icmp_type 'router-solicitation'<br>
list icmp_type 'neighbour-solicitation'<br>
list icmp_type 'router-advertisement'<br>
list icmp_type 'neighbour-advertisement'<br>
option limit '1000/sec'<br>
option family 'ipv6'<br>
option target 'ACCEPT'<br>
<br>
config rule<br>
option name 'Allow-ICMPv6-Forward'<br>
option src 'wan'<br>
option dest '*'<br>
option proto 'icmp'<br>
list icmp_type 'echo-request'<br>
list icmp_type 'echo-reply'<br>
list icmp_type 'destination-unreachable'<br>
list icmp_type 'packet-too-big'<br>
list icmp_type 'time-exceeded'<br>
list icmp_type 'bad-header'<br>
list icmp_type 'unknown-header-type'<br>
option limit '1000/sec'<br>
option family 'ipv6'<br>
option target 'ACCEPT'<br>
<br>
config include<br>
option path '/etc/firewall.user'<br>
<br>
config include 'miniupnpd'<br>
option type 'script'<br>
option path '/usr/share/miniupnpd/firewall.include'<br>
option family 'IPv4'<br>
option reload '1'<br>
<br>
On Tue, Aug 4, 2015 at 12:38 PM, Weedy <<a href="mailto:weedy2887@gmail.com" target="_blank">weedy2887@gmail.com</a>> wrote:<br>
<br>
Is there something wrong with the default rules for your use case?<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
Your WiFi interfaces are tagged LAN, things should just work.<br>
On 4 Aug 2015 00:07, "John kerry" <<a href="mailto:kerry9842@gmail.com" target="_blank">kerry9842@gmail.com</a>> wrote:<br>
<br>
Hi,<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
below is the /etc/config/network and /etc/config/wireless changes.<br>
<br>
*/etc/config/network:*<br>
<br>
config interface 'loopback'<br>
option ifname 'lo'<br>
option proto 'static'<br>
option ipaddr '127.0.0.1'<br>
option netmask '255.0.0.0'<br>
<br>
config interface 'lan'<br>
option ifname 'eth0.1 eth1'<br>
option type 'bridge'<br>
option proto 'static'<br>
option ipaddr '192.168.1.5'<br>
option netmask '255.255.255.0'<br>
<br>
config interface 'wan'<br>
option ifname 'eth0.2'<br>
option proto 'dhcp'<br>
<br>
config switch<br>
option name 'eth0'<br>
option reset '1'<br>
option enable_vlan '1'<br>
<br>
config switch_vlan<br>
option device 'eth0'<br>
option vlan '1'<br>
option ports '0t 2 3 4 5'<br>
<br>
config switch_vlan<br>
option device 'eth0'<br>
option vlan '2'<br>
option ports '0t 1'<br>
<br>
config switch<br>
option name 'eth1'<br>
option reset '1'<br>
option enable_vlan '1'<br>
<br>
config switch_vlan<br>
option device 'eth1'<br>
option vlan '1'<br>
option ports '0 1 2 3 4 5'<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
*/etc/config/wireless:config wifi-device 'wifi0' option type<br>
'qcawifi' option channel 'auto' option macaddr<br>
'00:03:7f:42:06:61' option hwmode '11ng' option txpower<br>
'19' option htmode 'HT20'config wifi-iface option device<br>
'wifi0' option network 'lan' option mode 'ap'<br>
option<br>
encryption 'psk2' option ssid 'Test_ap_1' option key *<br>
*'Test_ap_1'*<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
*config wifi-device 'wifi1' option type 'qcawifi' option<br>
channel 'auto' option macaddr '00:03:7f:42:06:62' option<br>
hwmode '11na' option txpower '23' option htmode<br>
'HT20'config<br>
wifi-iface option device 'wifi1' option network 'lan'<br>
option mode 'ap' option ssid 'Test_ap_2' option<br>
encryption<br>
'psk2' option key 'test_ap_2''*<br>
<br>
<br>
*Thanks,*<br>
<br>
<br>
On Tue, Aug 4, 2015 at 11:56 AM, David Lang <<a href="mailto:david@lang.hm" target="_blank">david@lang.hm</a>> wrote:<br>
<br>
can you connect via a wired port?<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
given that you've been changing /etc/config/network and<br>
/etc/config/wireless, could you show us what you ended up with there?<br>
<br>
David Lang<br>
<br>
<br>
On Tue, 4 Aug 2015, John kerry wrote:<br>
<br>
Hi,<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
I am using ar71xx OpenWrt. I have connected internet connection to<br>
WAN<br>
port<br>
and my PC to LAN. I have enabled the WiFi0. The LAN port static IP i<br>
am<br>
able to open GUI and even my mobile i connected to Wifi AP and able<br>
to<br>
open<br>
GUI in mobile. But I am not able to access internet on mobile which<br>
is<br>
connected to wifi0 AP.<br>
<br>
I have added below script under /etc/firewall.user file.<br>
iptables ...flush<br>
iptables --table nat --flush<br>
iptables --delete-chain<br>
iptables --table nat --delete-chain<br>
iptables -A FORWARD -j ACCEPT -i br-lan -o eth0.2 -m state --state<br>
NEW<br>
iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT<br>
iptables -A POSTROUTING -t nat -o eth0.2 -j MASQUERADE<br>
echo 1 > /proc/sys/net/ipv4/ip_forward<br>
<br>
#where br-lan = LAN<br>
eth0.2 = WAN<br>
<br>
Could anyone help me to write the proper NAT rules so that able to<br>
access<br>
the internet.<br>
<br>
Thanks,<br>
<br>
On Mon, Aug 3, 2015 at 11:29 AM, John kerry <<a href="mailto:kerry9842@gmail.com" target="_blank">kerry9842@gmail.com</a>><br>
wrote:<br>
<br>
Hello Guys,<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
It's working. Thanks a lot to all of you :)<br>
<br>
On Mon, Aug 3, 2015 at 10:43 AM, David Lang <<a href="mailto:david@lang.hm" target="_blank">david@lang.hm</a>> wrote:<br>
<br>
The way to do this is to first forget about the factory reset<br>
problem<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
and<br>
configure the AP to do what you want (including any encryption)<br>
<br>
then you can take the resulting file and put it into the build<br>
system so<br>
that it becomes the 'factory default' settings.<br>
<br>
Since you are not understanding how to configure the files from the<br>
documentation, configure them from the GUI and then look at the<br>
resulting<br>
files.<br>
<br>
David Lang<br>
<br>
<br>
On Mon, 3 Aug 2015, John kerry wrote:<br>
<br>
Hi All,<br>
<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
I created separate files directory and added network and wireless<br>
files<br>
and<br>
its working everything but still i am not able to use encryption<br>
wpa2.<br>
Below is the my script.<br>
config wifi-device wifi0<br>
option type qcawifi<br>
option channel auto<br>
option macaddr 00:03:7f:42:06:61<br>
option hwmode 11ng<br>
# REMOVE THIS LINE TO ENABLE WIFI:<br>
option disabled 0<br>
<br>
config wifi-iface<br>
option device wifi0<br>
option network lan<br>
option mode ap<br>
option ssid CD-1<br>
option encryption psk2<br>
option key CD-1<br>
<br>
M I doing anything wrong?<br>
<br>
Thanks,<br>
<br>
On Mon, Aug 3, 2015 at 6:40 AM, David Lang <<a href="mailto:david@lang.hm" target="_blank">david@lang.hm</a>> wrote:<br>
<br>
to make the config be there after a factory reset, you need to put<br>
the<br>
<br>
changes into the image that you build.<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
you already did this for /etc/config/network, do the same thing<br>
for<br>
/etc/config/wireless<br>
<br>
David Lang<br>
<br>
<br>
On Sun, 2 Aug 2015, John kerry wrote:<br>
<br>
Hi Leiten,<br>
<br>
<br>
I have one issue, after upgrading this firmware it will load<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
wireless<br>
configuration with this changes, actually it should load when i<br>
do<br>
factory<br>
reset.<br>
<br>
Thanks,<br>
<br>
On Sun, Aug 2, 2015 at 3:45 PM, John kerry <<a href="mailto:kerry9842@gmail.com" target="_blank">kerry9842@gmail.com</a><br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
</blockquote>
wrote:<br>
<br>
Hi Leiten,<br>
<br>
<br>
Thank you so much, Its working :)<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
On Sun, Aug 2, 2015 at 3:12 PM, N.Leiten <<a href="mailto:nickleiten@gmail.com" target="_blank">nickleiten@gmail.com</a><br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
</blockquote>
wrote:<br>
<br>
Hi,<br>
<br>
<br>
Don't answer to my e-mail only, you need to add openwrt-devel<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
maillist<br>
to<br>
CC or just answer to CC, in each case I'll receive message but<br>
also<br>
everyone could see all discussion.<br>
<br>
In email dated Воскресенье - 02 августа 2015 12:54:32 user<br>
John<br>
kerry<br>
wrote:<br>
<br>
Hi Leiten,<br>
<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
I have added new files under and written below :<br>
vi target/linux/ar71xx/base-files/etc/uci-defaults/wireless<br>
<br>
<br>
Use index in prefix of filename to set order of execution, so<br>
<br>
</blockquote>
it'll<br>
be<br>
like '99-wireless'.<br>
<br>
<br>
#!/bin/sh<br>
<br>
#<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
# Copyright (c) 2013 The Linux Foundation. All rights<br>
reserved.<br>
# Copyright (C) 2011 OpenWrt.org<br>
#<br>
<br>
[ -e /etc/config/wireless ] && exit 0<br>
<br>
<br>
Here is the problem. When uci-defaults invoke scripts there's<br>
<br>
</blockquote>
already<br>
preconfiguration done and /etc/config/wireless already exists,<br>
so<br>
your<br>
script just exit at this point. Remove this line.<br>
<br>
<br>
touch /etc/config/wireless<br>
<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
uci set wireless.@wifi-device[0].disabled=0;<br>
uci set system.@system[0].hostname=test_ap<br>
uci set wireless.@wifi-iface[0].mode=ap<br>
uci set wireless.@wifi-iface[0].ssid=CD-2.4D<br>
uci set wireless.@wifi-iface[0].encryption=none<br>
uci set wireless.@wifi-iface[0].wds=1<br>
uci set wireless.radio0.disabled=0<br>
<br>
uci commit wireless<br>
<br>
exit 0<br>
<br>
and compile the source code using make V=s but still not<br>
changed<br>
default<br>
settings.<br>
<br>
Please help me to make it works.<br>
<br>
Thanks,<br>
<br>
<br>
On Sat, Aug 1, 2015 at 4:38 PM, N.Leiten <<br>
<a href="mailto:nickleiten@gmail.com" target="_blank">nickleiten@gmail.com</a><br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
wrote:<br>
</blockquote>
<br>
You can also use uci-defaults mechanism for your purpose.<br>
Just<br>
put<br>
<br>
script in base-files/etc/uci-defaults and set your<br>
preferrable<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
parameters with uci and don't forget to 'exit 0' at the end<br>
of<br>
script,<br>
in elsecase it'll be run every time at boot ruining changes.<br>
<br>
2015-07-31 12:08 GMT+03:00 John kerry <<a href="mailto:kerry9842@gmail.com" target="_blank">kerry9842@gmail.com</a><br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
:<br>
</blockquote>
<br>
Hi,<br>
<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
I am working on Ar71xx openWRT Luci project. By default the<br>
Wi-Fi<br>
is<br>
disabled and SSID is OpenWrt. I need to change the default<br>
settings.<br>
Could anyone help me to change the default settings.<br>
<br>
<br>
Best Regards,<br>
John<br>
<br>
_______________________________________________<br>
openwrt-devel mailing list<br>
<a href="mailto:openwrt-devel@lists.openwrt.org" target="_blank">openwrt-devel@lists.openwrt.org</a><br>
<br>
<br>
<a href="https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel" rel="noreferrer" target="_blank">https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel</a><br>
<br>
_______________________________________________<br>
<br>
openwrt-devel mailing list<br>
<br>
</blockquote>
<a href="mailto:openwrt-devel@lists.openwrt.org" target="_blank">openwrt-devel@lists.openwrt.org</a><br>
<br>
<br>
<a href="https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel" rel="noreferrer" target="_blank">https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel</a><br>
<br>
_______________________________________________<br>
<br>
openwrt-devel mailing list<br>
<br>
</blockquote>
<br>
<a href="mailto:openwrt-devel@lists.openwrt.org" target="_blank">openwrt-devel@lists.openwrt.org</a><br>
</blockquote>
<br>
<a href="https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel" rel="noreferrer" target="_blank">https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel</a><br>
<br>
<br>
<br>
<br>
<br>
</blockquote>
<br>
<br>
</blockquote></blockquote></blockquote></blockquote></blockquote>
<br>
</blockquote></blockquote></blockquote>
<br>
</blockquote></blockquote>
<br>
</blockquote></blockquote></blockquote>
</div></div></blockquote>
</blockquote></div><br></div>
</div></div></blockquote></div><br></div>