<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<STYLE type=text/css> <!--@import url(scrollbar.css); --></STYLE>
<META content="text/html; charset=utf-8" http-equiv=Content-Type>
<STYLE> body{FONT-SIZE:12pt; FONT-FAMILY:宋体,serif;} </STYLE>
<META name=GENERATOR content="MSHTML 8.00.6001.18702"><BASE
target=_blank></HEAD>
<BODY
style="LINE-HEIGHT: 1.3; BORDER-RIGHT-WIDTH: 0px; MARGIN: 12px; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; BORDER-LEFT-WIDTH: 0px"
marginheight="0" marginwidth="0">
<DIV><FONT size=2 face=Verdana>
<DIV>From: Tom Deng <2579131212@qq.com> </DIV>
<DIV> </DIV>
<DIV>Adding support for OYE-0001 Wireless Router. </DIV>
<DIV>OYE-0001 is a wireless router made by oyewifi.com. Below is the details: </DIV>
<DIV>MT7620A, 128MB DDR2, 16MB FLASH, SD Slot, USB 2.0, 4 x LAN + 1 x WAN. </DIV>
<DIV>Signed-off-by: Tom Deng <2579131212@qq.com> </DIV>
<DIV>--- </DIV>
<DIV>Index: target/linux/ramips/base-files/etc/diag.sh </DIV>
<DIV>=================================================================== </DIV>
<DIV>--- target/linux/ramips/base-files/etc/diag.sh (revision 43797) </DIV>
<DIV>+++ target/linux/ramips/base-files/etc/diag.sh (working copy) </DIV>
<DIV>@@ -185,6 +185,9 @@ </DIV>
<DIV> f7c027) </DIV>
<DIV> status_led="belkin:orange:status" </DIV>
<DIV> ;; </DIV>
<DIV>+ oye-0001) </DIV>
<DIV>+ status_led="oye:green:wifi" </DIV>
<DIV>+ ;; </DIV>
<DIV> na930) </DIV>
<DIV> status_led="na930:blue:power" </DIV>
<DIV> ;; </DIV>
<DIV>Index: target/linux/ramips/base-files/etc/uci-defaults/01_leds </DIV>
<DIV>=================================================================== </DIV>
<DIV>--- target/linux/ramips/base-files/etc/uci-defaults/01_leds (revision 43797) </DIV>
<DIV>+++ target/linux/ramips/base-files/etc/uci-defaults/01_leds (working copy) </DIV>
<DIV>@@ -198,6 +198,10 @@ </DIV>
<DIV> set_wifi_led "zbtlink:blue:air" </DIV>
<DIV> set_usb_led "zbtlink:blue:usb" </DIV>
<DIV> ;; </DIV>
<DIV>+ oye-0001) </DIV>
<DIV>+ ucidef_set_led_default "power" "power" "oye:green:power" "1" </DIV>
<DIV>+ set_wifi_led "oye:green:wifi" </DIV>
<DIV>+ ;; </DIV>
<DIV> wr8305rt) </DIV>
<DIV> ucidef_set_led_default "power" "power" "wr8305rt:sys" "1" </DIV>
<DIV> set_usb_led "wr8305rt:usb" </DIV>
<DIV>Index: target/linux/ramips/base-files/etc/uci-defaults/02_network </DIV>
<DIV>=================================================================== </DIV>
<DIV>--- target/linux/ramips/base-files/etc/uci-defaults/02_network (revision 43797) </DIV>
<DIV>+++ target/linux/ramips/base-files/etc/uci-defaults/02_network (working copy) </DIV>
<DIV>@@ -103,6 +103,7 @@ </DIV>
<DIV> dir-615-h1 | \ </DIV>
<DIV> hlk-rm04 | \ </DIV>
<DIV> mzk-w300nh2 | \ </DIV>
<DIV>+ oye-0001 | \ </DIV>
<DIV> mzk-750dhp) </DIV>
<DIV> ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" </DIV>
<DIV> ucidef_add_switch "switch0" "1" "1" </DIV>
<DIV>@@ -220,6 +221,11 @@ </DIV>
<DIV> wan_mac=$(mtd_get_mac_binary devdata 7) </DIV>
<DIV> ;; </DIV>
<DIV> </DIV>
<DIV>+ oye-0001) </DIV>
<DIV>+ lan_mac=$(mtd_get_mac_binary factory 40) </DIV>
<DIV>+ wan_mac=$(mtd_get_mac_binary factory 46) </DIV>
<DIV>+ ;; </DIV>
<DIV>+ </DIV>
<DIV> w306r-v20) </DIV>
<DIV> lan_mac=$(cat /sys/class/net/eth0/address) </DIV>
<DIV> wan_mac=$(macaddr_add "$lan_mac" 5) </DIV>
<DIV>Index: target/linux/ramips/base-files/lib/ramips.sh </DIV>
<DIV>=================================================================== </DIV>
<DIV>--- target/linux/ramips/base-files/lib/ramips.sh (revision 43797) </DIV>
<DIV>+++ target/linux/ramips/base-files/lib/ramips.sh (working copy) </DIV>
<DIV>@@ -322,6 +322,9 @@ </DIV>
<DIV> *"Zbtlink ZBT-WA05") </DIV>
<DIV> name="zbt-wa05" </DIV>
<DIV> ;; </DIV>
<DIV>+ *"OYE-0001") </DIV>
<DIV>+ name="oye-0001" </DIV>
<DIV>+ ;; </DIV>
<DIV> *"ZBT WR8305RT") </DIV>
<DIV> name="wr8305rt" </DIV>
<DIV> ;; </DIV>
<DIV>Index: target/linux/ramips/base-files/lib/upgrade/platform.sh </DIV>
<DIV>=================================================================== </DIV>
<DIV>--- target/linux/ramips/base-files/lib/upgrade/platform.sh (revision 43797) </DIV>
<DIV>+++ target/linux/ramips/base-files/lib/upgrade/platform.sh (working copy) </DIV>
<DIV>@@ -95,6 +95,7 @@ </DIV>
<DIV> wmr300 |\ </DIV>
<DIV> wr8305rt |\ </DIV>
<DIV> wrtnode |\ </DIV>
<DIV>+ oye-0001 |\ </DIV>
<DIV> x5 |\ </DIV>
<DIV> x8 |\ </DIV>
<DIV> zbt-wa05 |\ </DIV>
<DIV>Index: target/linux/ramips/dts/OYE-0001.dts </DIV>
<DIV>=================================================================== </DIV>
<DIV>--- target/linux/ramips/dts/OYE-0001.dts (revision 0) </DIV>
<DIV>+++ target/linux/ramips/dts/OYE-0001.dts (revision 0) </DIV>
<DIV>@@ -0,0 +1,123 @@ </DIV>
<DIV>+/dts-v1/; </DIV>
<DIV>+ </DIV>
<DIV>+/include/ "mt7620a.dtsi" </DIV>
<DIV>+ </DIV>
<DIV>+/ { </DIV>
<DIV>+ compatible = "ralink,mt7620a-soc"; </DIV>
<DIV>+ model = "OYE-0001"; </DIV>
<DIV>+ </DIV>
<DIV>+ chosen { </DIV>
<DIV>+ bootargs = "console=ttyS0,115200"; </DIV>
<DIV>+ }; </DIV>
<DIV>+ </DIV>
<DIV>+ palmbus@10000000 { </DIV>
<DIV>+ gpio2: gpio@660 { </DIV>
<DIV>+ status = "okay"; </DIV>
<DIV>+ }; </DIV>
<DIV>+ </DIV>
<DIV>+ gpio3: gpio@688 { </DIV>
<DIV>+ status = "okay"; </DIV>
<DIV>+ }; </DIV>
<DIV>+ </DIV>
<DIV>+ spi@b00 { </DIV>
<DIV>+ status = "okay"; </DIV>
<DIV>+ </DIV>
<DIV>+ m25p80@0 { </DIV>
<DIV>+ #address-cells = <1>; </DIV>
<DIV>+ #size-cells = <1>; </DIV>
<DIV>+ compatible = "w25q128"; </DIV>
<DIV>+ reg = <0 0>; </DIV>
<DIV>+ linux,modalias = "m25p80", "w25q128"; </DIV>
<DIV>+ spi-max-frequency = <10000000>; </DIV>
<DIV>+ </DIV>
<DIV>+ partition@0 { </DIV>
<DIV>+ label = "u-boot"; </DIV>
<DIV>+ reg = <0x0 0x30000>; </DIV>
<DIV>+ read-only; </DIV>
<DIV>+ }; </DIV>
<DIV>+ </DIV>
<DIV>+ partition@30000 { </DIV>
<DIV>+ label = "u-boot-env"; </DIV>
<DIV>+ reg = <0x30000 0x10000>; </DIV>
<DIV>+ read-only; </DIV>
<DIV>+ }; </DIV>
<DIV>+ </DIV>
<DIV>+ factory: partition@40000 { </DIV>
<DIV>+ label = "factory"; </DIV>
<DIV>+ reg = <0x40000 0x10000>; </DIV>
<DIV>+ read-only; </DIV>
<DIV>+ }; </DIV>
<DIV>+ </DIV>
<DIV>+ partition@50000 { </DIV>
<DIV>+ label = "firmware"; </DIV>
<DIV>+ reg = <0x50000 0xfb0000>; </DIV>
<DIV>+ }; </DIV>
<DIV>+ </DIV>
<DIV>+ }; </DIV>
<DIV>+ }; </DIV>
<DIV>+ }; </DIV>
<DIV>+ </DIV>
<DIV>+ pinctrl { </DIV>
<DIV>+ state_default: pinctrl0 { </DIV>
<DIV>+ gpio { </DIV>
<DIV>+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd"; </DIV>
<DIV>+ ralink,function = "gpio"; </DIV>
<DIV>+ }; </DIV>
<DIV>+ }; </DIV>
<DIV>+ }; </DIV>
<DIV>+ </DIV>
<DIV>+ ethernet@10100000 { </DIV>
<DIV>+ pinctrl-names = "default"; </DIV>
<DIV>+ pinctrl-0 = <&ephy_pins>; </DIV>
<DIV>+ </DIV>
<DIV>+ ralink,port-map = "llllw"; </DIV>
<DIV>+ }; </DIV>
<DIV>+ </DIV>
<DIV>+ gsw@10110000 { </DIV>
<DIV>+ ralink,port4 = "ephy"; </DIV>
<DIV>+ }; </DIV>
<DIV>+ </DIV>
<DIV>+ wmac@10180000 { </DIV>
<DIV>+ ralink,mtd-eeprom = <&factory 0>; </DIV>
<DIV>+ }; </DIV>
<DIV>+ </DIV>
<DIV>+ gpio-leds { </DIV>
<DIV>+ compatible = "gpio-leds"; </DIV>
<DIV>+ powerled { </DIV>
<DIV>+ label = "oye:green:power"; </DIV>
<DIV>+ gpios = <&gpio0 9 1>; </DIV>
<DIV>+ }; </DIV>
<DIV>+ wifiled { </DIV>
<DIV>+ label = "oye:green:wifi"; </DIV>
<DIV>+ gpios = <&gpio3 0 1>; </DIV>
<DIV>+ }; </DIV>
<DIV>+ }; </DIV>
<DIV>+ </DIV>
<DIV>+ sdhci@10130000 { </DIV>
<DIV>+ status = "okay"; </DIV>
<DIV>+ }; </DIV>
<DIV>+ </DIV>
<DIV>+ ehci@101c0000 { </DIV>
<DIV>+ status = "okay"; </DIV>
<DIV>+ }; </DIV>
<DIV>+ </DIV>
<DIV>+ ohci@101c1000 { </DIV>
<DIV>+ status = "okay"; </DIV>
<DIV>+ }; </DIV>
<DIV>+ </DIV>
<DIV>+ pcie@10140000 { </DIV>
<DIV>+ status = "okay"; </DIV>
<DIV>+ }; </DIV>
<DIV>+ </DIV>
<DIV>+ gpio-keys-polled { </DIV>
<DIV>+ compatible = "gpio-keys-polled"; </DIV>
<DIV>+ #address-cells = <1>; </DIV>
<DIV>+ #size-cells = <0>; </DIV>
<DIV>+ poll-interval = <20>; </DIV>
<DIV>+ s1 { </DIV>
<DIV>+ label = "reset"; </DIV>
<DIV>+ gpios = <&gpio0 1 1>; </DIV>
<DIV>+ linux,code = <0x198>; </DIV>
<DIV>+ }; </DIV>
<DIV>+ }; </DIV>
<DIV>+}; </DIV>
<DIV>Index: target/linux/ramips/image/Makefile </DIV>
<DIV>=================================================================== </DIV>
<DIV>--- target/linux/ramips/image/Makefile (revision 43797) </DIV>
<DIV>+++ target/linux/ramips/image/Makefile (working copy) </DIV>
<DIV>@@ -724,6 +724,7 @@ </DIV>
<DIV> na930_mtd_size=20971520 </DIV>
<DIV> Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size)) </DIV>
<DIV> Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP) </DIV>
<DIV>+Image/Build/Profile/OYE-0001=$(call BuildFirmware/Default16M/$(1),$(1),oye-0001,OYE-0001) </DIV>
<DIV> Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1,Y1) </DIV>
<DIV> Image/Build/Profile/Y1S=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1s,Y1S) </DIV>
<DIV> </DIV>
<DIV>@@ -740,6 +741,7 @@ </DIV>
<DIV> $(call Image/Build/Profile/WHR1166D,$(1)) </DIV>
<DIV> $(call Image/Build/Profile/MZK-750DHP,$(1)) </DIV>
<DIV> $(call Image/Build/Profile/NA930,$(1)) </DIV>
<DIV>+ $(call Image/Build/Profile/OYE-0001,$(1)) </DIV>
<DIV> $(call Image/Build/Profile/Y1,$(1)) </DIV>
<DIV> $(call Image/Build/Profile/Y1S,$(1)) </DIV>
<DIV> endef </DIV></FONT></DIV></BODY></HTML>