<div dir="ltr"><div><div><div><div>I'm interested in trying to build the rtl8192cu drivers found in the raspberrypi kernel source tree. These drivers are modified versions of the realtek provided open source. <a href="https://github.com/raspberrypi/linux/tree/rpi-3.18.y/drivers/net/wireless/rtl8192cu">https://github.com/raspberrypi/linux/tree/rpi-3.18.y/drivers/net/wireless/rtl8192cu</a>  It seems that they have disabled the stock kernel drivers for the rtlwifi and enabled the realtek open source drivers into rpi kernel.  From what I read the realtek open source drivers tend to work better in AP mode.<br><br></div>I understand a bit how to modify the Kconfig files to exclude the old rtlwifi and enable the new rtl8192cu drivers, in the /drivers/net/wireless/rtl8192cu/ directories.  How ever that is with the kernel source is already downloaded.  And not sure how to preceed from there.  How do I configure the module so that make menuconfig finds it and pulls in the values so its selected to build?<br><br></div>Is there a suggested way for me to test this build out?  Ay web links for documents that would help me make build changes to test out this different driver source?   I would suspect that this is common with other people who are developing drivers run in to a similar issue.<br><br></div>Thanks<br></div>    Derek<br></div>