<div dir="ltr">The title of the old patch is not started with [PATCH] so it is not recognized as a patch in the patchwork:-)<div class="gmail_extra"><br><div class="gmail_quote">2015-04-06 9:09 GMT+08:00 L. D. Pinney <span dir="ltr"><<a href="mailto:ldpinney@gmail.com" target="_blank">ldpinney@gmail.com</a>></span>:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div style="font-size:small">Also...</div><div style="font-size:small"><br></div><div style="font-size:small">You should have accounts on :</div><div style="font-size:small"><a href="https://patchwork.ozlabs.org/" target="_blank">https://patchwork.ozlabs.org/</a><br></div><div style="font-size:small"><br></div><div style="font-size:small">Then Jason can mark the old patch superseded.</div><div style="font-size:small"><br></div><div style="font-size:small">Larry</div><div style="font-size:small"><br></div></div><div class="HOEnZb"><div class="h5"><div class="gmail_extra"><br><div class="gmail_quote">On Sun, Apr 5, 2015 at 7:30 PM, L. D. Pinney <span dir="ltr"><<a href="mailto:ldpinney@gmail.com" target="_blank">ldpinney@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div style="font-size:small"><br></div><div style="font-size:small">Hi :</div><div style="font-size:small"><br></div><div style="font-size:small">This one looks much better :)</div><div style="font-size:small"><br></div><div style="font-size:small">Larry</div></div><div><div><div class="gmail_extra"><br><div class="gmail_quote">On Sun, Apr 5, 2015 at 7:15 PM, 郭传鈜 <span dir="ltr"><<a href="mailto:gch981213@gmail.com" target="_blank">gch981213@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">First of all,this patch is not created by me.I just help him to send this patch:-D<br>
<br>
MicroWRT is an wireless router with 2 USB,1 ethernet port. It<br>
has a 16M flash and 64M DDR2 RAM. You can use most interface, such as<br>
i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to<br>
combine with the core board. The detailed information, please refer to<br>
<a href="https://www.microduino.cc/wiki/index.php?title=Main_Page" target="_blank">https://www.microduino.cc/wiki/index.php?title=Main_Page</a><br>
<br>
This patch adds support for it.<br>
Because there is only one port,so disabled VLAN and use eth0 as lan<br>
port. and only a power LED control by power pin.<br>
Signed-off-by: 盛凯 <shengkai81 at <a href="http://gmail.com" target="_blank">gmail.com</a>><br>
---<br>
.../linux/ramips/base-files/etc/board.d/02_network | 1 +<br>
target/linux/ramips/base-files/lib/ramips.sh | 3 +<br>
.../ramips/base-files/lib/upgrade/platform.sh | 1 +<br>
target/linux/ramips/dts/MicroWRT.dts | 107 +++++++++++++++++++++<br>
target/linux/ramips/image/Makefile | 2 +<br>
target/linux/ramips/mt7620/profiles/<a href="http://microwrt.mk" target="_blank">microwrt.mk</a> | 12 +++<br>
6 files changed, 126 insertions(+)<br>
create mode 100644 target/linux/ramips/dts/MicroWRT.dts<br>
create mode 100644 target/linux/ramips/mt7620/profiles/<a href="http://microwrt.mk" target="_blank">microwrt.mk</a><br>
<br>
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network<br>
index d4ec19d..2035ab0 100755<br>
--- a/target/linux/ramips/base-files/etc/board.d/02_network<br>
+++ b/target/linux/ramips/base-files/etc/board.d/02_network<br>
@@ -45,6 +45,7 @@ ramips_setup_interfaces()<br>
<br>
3g150b | \<br>
3g300m | \<br>
+ microwrt | \<br>
w150m | \<br>
zte-q7 | \<br>
all0256n | \<br>
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh<br>
index fc6eb37..d115b4f 100755<br>
--- a/target/linux/ramips/base-files/lib/ramips.sh<br>
+++ b/target/linux/ramips/base-files/lib/ramips.sh<br>
@@ -202,6 +202,9 @@ ramips_board_detect() {<br>
*"Planex MZK-750DHP")<br>
name="mzk-750dhp"<br>
;;<br>
+ *"MakerModule MicroWRT")<br>
+ name="microwrt"<br>
+ ;;<br>
*"NBG-419N")<br>
name="nbg-419n"<br>
;;<br>
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh<br>
index a5773b5..57a339e 100755<br>
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh<br>
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh<br>
@@ -60,6 +60,7 @@ platform_check_image() {<br>
m2m | \<br>
m3 | \<br>
m4 | \<br>
+ microwrt | \<br>
mlw221 | \<br>
mlwg2 | \<br>
mofi3500-3gn | \<br>
diff --git a/target/linux/ramips/dts/MicroWRT.dts b/target/linux/ramips/dts/MicroWRT.dts<br>
new file mode 100644<br>
index 0000000..8088ccb<br>
--- /dev/null<br>
+++ b/target/linux/ramips/dts/MicroWRT.dts<br>
@@ -0,0 +1,107 @@<br>
+/dts-v1/;<br>
+<br>
+/include/ "mt7620a.dtsi"<br>
+<br>
+/ {<br>
+ compatible = "microwrt", "ralink,mt7620a-soc";<br>
+ model = "MakerModule MicroWRT";<br>
+<br>
+ chosen {<br>
+ bootargs = "console=ttyS0,115200";<br>
+ };<br>
+<br>
+ palmbus@10000000 {<br>
+ gpio2: gpio@660 {<br>
+ status = "okay";<br>
+ };<br>
+<br>
+ gpio3: gpio@688 {<br>
+ status = "okay";<br>
+ };<br>
+<br>
+ spi@b00 {<br>
+ status = "okay";<br>
+<br>
+ m25p80@0 {<br>
+ #address-cells = <1>;<br>
+ #size-cells = <1>;<br>
+ compatible = "w25q128";<br>
+ reg = <0 0>;<br>
+ linux,modalias = "m25p80", "w25q128";<br>
+ spi-max-frequency = <10000000>;<br>
+<br>
+ partition@0 {<br>
+ label = "u-boot";<br>
+ reg = <0x0 0x30000>;<br>
+ read-only;<br>
+ };<br>
+<br>
+ partition@30000 {<br>
+ label = "u-boot-env";<br>
+ reg = <0x30000 0x10000>;<br>
+ read-only;<br>
+ };<br>
+<br>
+ factory: partition@40000 {<br>
+ label = "factory";<br>
+ reg = <0x40000 0x10000>;<br>
+ read-only;<br>
+ };<br>
+<br>
+ partition@50000 {<br>
+ label = "firmware";<br>
+ reg = <0x50000 0xfb0000>;<br>
+ };<br>
+ };<br>
+ };<br>
+ };<br>
+<br>
+ ehci@101c0000 {<br>
+ status = "okay";<br>
+ };<br>
+<br>
+ ohci@101c1000 {<br>
+ status = "okay";<br>
+ };<br>
+<br>
+ pcie@10140000 {<br>
+ status = "okay";<br>
+ };<br>
+<br>
+ ethernet@10100000 {<br>
+ pinctrl-names = "default";<br>
+ pinctrl-0 = <&ephy_pins>;<br>
+ mtd-mac-address = <&factory 0x4>;<br>
+ ralink,port-map = "llllw";<br>
+ };<br>
+<br>
+ wmac@10180000 {<br>
+ ralink,mtd-eeprom = <&factory 0>;<br>
+ };<br>
+<br>
+ pinctrl {<br>
+ state_default: pinctrl0 {<br>
+ default {<br>
+ ralink,group = "wled", "i2c", "wdt", "uartf";<br>
+ ralink,function = "gpio";<br>
+ };<br>
+ };<br>
+ };<br>
+<br>
+ gpio-keys-polled {<br>
+ compatible = "gpio-keys-polled";<br>
+ #address-cells = <1>;<br>
+ #size-cells = <0>;<br>
+ poll-interval = <20>;<br>
+ reset {<br>
+ label = "reset";<br>
+ gpios = <&gpio0 1 1>;<br>
+ linux,code = <0x198>;<br>
+ };<br>
+ wps {<br>
+ label = "wps";<br>
+ gpios = <&gpio0 2 1>;<br>
+ linux,code = <0x211>;<br>
+ };<br>
+ };<br>
+ };<br>
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile<br>
index 743f7b4..30d9743 100644<br>
--- a/target/linux/ramips/image/Makefile<br>
+++ b/target/linux/ramips/image/Makefile<br>
@@ -865,6 +865,7 @@ Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1)<br>
Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)<br>
Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)<br>
Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)<br>
+Image/Build/Profile/MicroWRT=$(call BuildFirmware/Default16M/$(1),$(1),microwrt,MicroWRT)<br>
<br>
<br>
ifeq ($(SUBTARGET),mt7620)<br>
@@ -895,6 +896,7 @@ define Image/Build/Profile/Default<br>
$(call Image/Build/Profile/ZTE-Q7,$(1))<br>
$(call Image/Build/Profile/ZBT-WA05,$(1))<br>
$(call Image/Build/Profile/ArcherC20i,$(1))<br>
+ $(call Image/Build/Profile/MicroWRT,$(1))<br>
endef<br>
endif<br>
<br>
diff --git a/target/linux/ramips/mt7620/profiles/<a href="http://microwrt.mk" target="_blank">microwrt.mk</a> b/target/linux/ramips/mt7620/profiles/<a href="http://microwrt.mk" target="_blank">microwrt.mk</a><br>
new file mode 100644<br>
index 0000000..e1e944b<br>
--- /dev/null<br>
+++ b/target/linux/ramips/mt7620/profiles/<a href="http://microwrt.mk" target="_blank">microwrt.mk</a><br>
@@ -0,0 +1,11 @@<br>
+ define Profile/MicroWRT<br>
+ NAME:=MakerModule MicroWRT<br>
+ PACKAGES:=\<br>
+ kmod-usb-core kmod-usb2 kmod-usb-ohci<br>
+ endef<br>
+<br>
+ define Profile/MicroWRT/Description<br>
+ Support for MicroWRT<br>
+ endef<br>
+ $(eval $(call Profile,MicroWRT))<br>
+<br>
<span><font color="#888888">--<br>
2.1.0<br>
_______________________________________________<br>
openwrt-devel mailing list<br>
<a href="mailto:openwrt-devel@lists.openwrt.org" target="_blank">openwrt-devel@lists.openwrt.org</a><br>
<a href="https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel" target="_blank">https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel</a><br>
</font></span></blockquote></div><br></div>
</div></div></blockquote></div><br></div>
</div></div></blockquote></div><br></div></div>